key slot MITSUBISHI OUTLANDER 2020 Owner's Manual (in English)
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2020, Model line: OUTLANDER, Model: MITSUBISHI OUTLANDER 2020Pages: 443, PDF Size: 60.03 MB
Page 6 of 443
![MITSUBISHI OUTLANDER 2020  Owners Manual (in English) Instruments and controls 
Overview 1-2
1
Audio (if so equipped) [Refer to the separate owner’s manual.] Multi Around Monitor (if  
so equipped) P.5-147 
Hazard warning flasher switch P.5-209 
Electr MITSUBISHI OUTLANDER 2020  Owners Manual (in English) Instruments and controls 
Overview 1-2
1
Audio (if so equipped) [Refer to the separate owner’s manual.] Multi Around Monitor (if  
so equipped) P.5-147 
Hazard warning flasher switch P.5-209 
Electr](/img/19/34860/w960_34860-5.png)
Instruments and controls 
Overview 1-2
1
Audio (if so equipped) [Refer to the separate owner’s manual.] Multi Around Monitor (if  
so equipped) P.5-147 
Hazard warning flasher switch P.5-209 
Electric rear window defogger switch P.5-216 Wiper deicer switch (if so equipped) P.5-215 
Fuel tank filler door release lever P. 3 - 3 
Air conditioner P.7-5 Hood release lever P. 9 - 3 
Floor console box P.5-233 Arm rest 12 V power outlet (if so equipped)  P.5-221USB input terminal (if so equipped)  P.5-218 
Cup holder P.5-235 
12 V power outlet P.5-221 
Power liftgate main switch (if so equipped)  P.5-43 
Key slot (if so equipped) P.5-28 
Passenger’s vents P. 7 - 2 
Heated steering wheel switch (if so equipped) P.5-217 
Blind Spot Warning (BSW)  switch (if so equipped) P.5-127 
USB input terminal (if so equipped)  P.5-218 
USB input terminal P.5-218 
2nd seat vents (if so equipped) P. 7 - 2 
USB port (for charging) (if so equipped) P.5-222 
ECO mode switch P.5-209
BK0278200US.book  2 ページ  2019年4月10日 水曜日 午前10時59分 
Page 18 of 443

If this problem occurs... 
Quick index 2-5
2
The engine does not start and the  operation mode cannot be changed to OFF. (for vehicles  equipped with the F.A.S.T.-key) 
1. Move the selector lever to the “P” (PARK) 
 position, and then cha
nge the operation mode  
to OFF.2. One of the other causes could be low battery voltage. If this occurs, the keyless entry system, the  
F.A.S.T.-key operation 
and the steering wheel  
lock (if so equipped) will also not operate 
. Contact an authorized Mitsubishi Motors  
dealer. 
P. 5-20 
The F.A.S.T.-key does not oper- ate.(for vehicles equipped with the  F. A . S . T. - k e y ) 
Insert the F.A.S.T.-key into the key slot of the instrument panel, and then start the engine or  change the operation mode. Use the emergency  
key to lock and unlock the driver’s door. 
P. 5-28, 5-29 
Cannot shift the selector lever  from the “P” (PARK) position. 
Shift the selector lever while pressing the brake pedal. Check that the ignition switch or 
 the operation mode is in ON. 
P. 5-70, 5-77 
The windows are fogged up. 
Push the defogger switch to change to the “ ” position. 
P. 7-9 
The engine does not start. The lights do not come on. The lights are dim. The horn does not honk.The horn sound is weak. 
Have the battery checked. Rech 
arge or replace as needed. 
P. 8-2, 9-14
Problem
Do this
Ref. Page
BK0278200US.book  5 ページ  2019年4月10日 水曜日 午前10時59分 
Page 109 of 443

Free-hand Advanced 
Security Transmitter (F.A.S
.T.-key) (if so equipped) 
5-28 Features and controls
5
1. Stop the vehicle. 2. Fully engage the parking brake while depressing the brake pedal. 3. Move the selector 
 lever to the “P” 
(PARK) position, and then press the engine switch to stop the engine.
N00568301142
Insert the F.A.S.T.-key into the key slot in the instrument panel. St 
arting the engine and 
changing the operation mode should be now possible. Remove the F.A.S.T.-key from the key slotafter starting the engine 
 or changing the oper- 
ation mode. 
If the operation mode is in OFF and the driver’s door is opened with the F.A.S.T.-key in the key slot, a warni 
ng is issued with the 
warning display and  
the buzzer buzzing for 
approximately 3 seconds to remind you to remove the key.
NOTE
 If you have to bring the engine to an emer- gency stop while driving, press and hold theengine switch for 3 seconds or more, or pressit quickly 3 times or  
more. The engine will 
stop and the operation m 
ode will go to ACC. 
 Do not stop the engine wi
th the selector lever 
in any position other than the “P” (PARK) position. If the engine is stopped with theselector lever in any  
position other than the 
“P” (PARK) position, the operation mode will go to ACC rather than OFF.Put the operation mode  
in OFF after placing 
the selector lever in the “P” (PARK) posi- tion.
If the F.A.S.T.-key is not operat- ing properly
 
NOTE
 Do not insert into the 
key slot anything other 
than the F.A.S.T.-key. This could cause dam-age or a malfunction.
 Remove the object or 
additional key from the 
F.A.S.T.-key before inserting the key into thekey slot. The vehicle may not be able toreceive the registered ID code from the regis- tered key. Therefore, th 
e engine may not start 
and the operation mode 
 may not change. 
 The F.A.S.T.-key is fixed in the key slot when inserted in the illustrated direction.Simply pull out the key to 
 remove it from the 
key slot.
F.A.S.T.-key reminder
 
NOTE
BK0278200US.book  28 ページ  2019年4月10日 水曜日 午前10時59分 
Page 111 of 443

Free-hand Advanced 
Security Transmitter (F.A.S
.T.-key) (if so equipped) 
5-30 Features and controls
5
N00561100014
To add a F.A.S.T.-key, you must already have 2 registered F.A.S.T.-keys. You need to regis- ter the ID code to the vehicle.Registering the ID code can be done by your authorized Mitsubishi Motors dealer. Or it can be done by yourself (except for vehiclessold in Canada). For you to register the ID code yourself, fol- low the “Customer F.A.S.T.-key program- ming” procedure below. If you choose to have your authorizedMitsubishi Motors dealer register the ID code, take your vehicle and all remaining F.A.S.T.-keys to your authorized MitsubishiMotors dealer.
N00561201302
You can program new F.A.S.T.-keys to thesystem if you have tw 
o valid (already regis- 
tered) F.A.S.T.-keys and a blank (not regis- tered) F.A.S.T.-key. For F.A.S.T.-key programming, follow the procedures below. 1. Open the driver’s door. 2. While carrying the fi 
rst valid F.A.S.T.- 
key, put the operation mode in ON. (Per- form the following procedure within 30 seconds.) 
3. Insert the new F.A.S.T.-key into the key slot in the illustrated direction. 4. With the first valid F.A.S.T.-key, press the UNLOCK button for 4 to 8 seconds and press the LOCK button during this time. 5. Release in sequence the LOCK andUNLOCK buttons within 8 seconds of pressing the LOCK button in step 4. (Per- form the following procedure within 30seconds.) 6. With the second valid F.A.S.T.-key, press the UNLOCK button for 4 to 8 secondsand press the LOCK button during this time.
Additional F.A.S.T.-keys
 
NOTE
 You are provided with 2 F.A.S.T.-keys, but you may register up to 4 F.A.S.T.-keys. You can obtain blank F. 
A.S.T.-keys specially 
cut for your vehicle from your MitsubishiMotors dealer.
Customer F.A.S.T.-key program- ming (Except for vehicles sold in Canada)
 
NOTE
 Keep the driver’s door open until F.A.S.T.- key programming is finished. Do not open or close other doors.
BK0278200US.book  30 ページ  2019年4月10日 水曜日 午前10時59分 
Page 112 of 443

Free-hand Advanced Securi
ty Transmitter (F.A.S.T.-key) (if so equipped) 
Features and controls 5-31
5
7. Release in sequence the LOCK and UNLOCK buttons within 8 seconds ofpressing the LOCK button in step 6. The immobilizer display on the information screen in the multi-information displaywill blink. (Perform 
 the following step 
within 20 seconds.) When registration of ID code is complete, the buzzer will s 
ound 3 times and the 
immobilizer display will come on for 30 seconds. If an error occurs, F.A.S.T.-key program-ming will be terminated and the buzzer will sound for 3 seconds. 8. If you wish to register another F.A.S.T.- key, repeat the proc 
ess from step 1 after 
the operation mode is put in OFF. 9. When all F.A.S.T.-keys are registered, remove the F.A.S.T.-key from the keyslot.
N00515501412
Press the remote control transmitter buttonsto lock or unlock the doors and the liftgate.It can also help you signal for attention by setting off the panic alarm. 
Press the LOCK button (1) to lock all the doors and the liftgate. The turn signal lights  
will also blink once. 
Press the UNLOCK button (2) to unlock the driver’s door only.
NOTE
 F.A.S.T.-key programming will be termi- nated if the operation mode is put in OFF before the immobilizer  
display starts blink- 
ing.
NOTE
 The immobilizer displa
y will go off immedi- 
ately if the operation  
mode is put in OFF. 
 Perform the operation when the interrupt dis- play screen is not show 
ing. The interrupt dis- 
play screen may prevent you from seeing theimmobilizer display.  It is not possible to register a F.A.S.T.-key if the immobilizer displa 
y goes off during the 
procedure.
Keyless entry system
 
1- 
LOCK ( ) button 
2- 
UNLOCK ( ) button
3- Power liftgate button (if so equipped) 4- PANIC button 5- Operation indicator light
NOTE
 On vehicles equipped wi
th the mirror retrac- 
tor switch, the outside rearview mirrors auto- matically retract or extend when the doors and the liftgate are locked or unlocked usingthe remote control transmitter buttons. Refer to “Features and controls: Outside rearview mirrors” on page 5-63.
To  l o c k
 
NOTE
 If you press the LOCK button (1) twice, the horn will sound once.
To  u n l o c k
 
BK0278200US.book  31 ページ  2019年4月10日 水曜日 午前10時59分 
Page 260 of 443

Indicator light, warning light, and information screen display list 
Features and controls 5-179
5
 There is a fault in the F. A. S. T. -key. Refer to “Free-hand Advanced Security Transmitter  
(F.A.S.T.-key)” on page 5-15. 
 The F. A. S. T. -key is not detected.
Insert the F. A. S. T. -key into the key slot. Refer to  “If the F. A. S. T. -key  
is not operating properly” on  
page 5-28.
Screen
Cause
Do this (Reference)
BK0278200US.book  179 ページ  2019年4月10日 水曜日 午前10時59分 
Page 261 of 443

Indicator light, warning light, and information screen display list 5-180 Features and controls
5
 You have forgotten to remove the F. A. S. T. -key  from the key slot. 
 Remove the F. A. S. T. -key from the key slot. 
 The steering wheel is locked.
Press the engine switch while turning steering wheel. Refer to “Steering wheel lock” on page 5-25. 
 The engine switch is presse
d to stop the engine while  
the selector lever is in a  
position other than the “P”  
(PARK) position. 
 Place the selector lever in the “P” (PARK) position  to put the operation mode in OFF. 
 The driver’s door is opened with the steering wheel  unlocked. 
 Refer to “Steering wheel lock” on page 5-25. 
 There is a fault in the EPS.
Have the vehicle inspected by an authorized Mit- subishi Motors dealer or  
a repair facility of your  
choice as soon as possible. Refer to “Electric power steering system (EPS)” on  page 5-99.  
 There is a fault in the Anti-lock braking system.
Avoid sudden braking and high-speed driving, park  the vehicle in a safe place, and take corrective mea- sures. Refer to “Anti-lock 
 braking system warning”  
on page 5-98.
Screen
Cause
Do this (Reference)
BK0278200US.book  180 ページ  2019年4月10日 水曜日 午前10時59分