lock MITSUBISHI OUTLANDER HYBRID 2014 3.G Owners Handbook
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2014, Model line: OUTLANDER HYBRID, Model: MITSUBISHI OUTLANDER HYBRID 2014 3.GPages: 28, PDF Size: 2.72 MB
Page 5 of 28
Downloaded from www.Manualslib.com manuals search engine 3
5. Turn off the air conditioning when it’s not needed.
6. Use Economy Mode. This maximizes the vehicle’s fuel
economy. It’s activated by pressing the ‘ECO’ button.
The Economy Mode limits other aspects of the vehicle’s
performance, such as acceleration rate and air-
conditioning, to save fuel.
7. When accelerating keep the ‘Power’ needle in the green
range so that (depending on battery level) the petrol
engine does not start.
8. Avoid hard braking. Braking gently or moderately allows
the regenerative braking system to recover energy from
the vehicle’s forward motion and store it as electricity.
Hard braking causes the vehicle to use its conventional
friction brakes, which do not recover energy. When using
regenerative braking, the ‘negative’ (LH) paddle increases
the amount of regenerative braking and thus the braking
force. This action also reduces wear to the braking system
components.
9. Use 4WD Lock Mode only when additional traction or
stability is required.
10. Familiarise yourself with the car’s hybrid information
display so you can monitor how much energy is being
used.
Page 14 of 28
Downloaded from www.Manualslib.com manuals search engine 12
02 Selector lever
R (Reverse): The vehicle moves in reverse.
N (Neutral): No drive is transmitted to the wheels, which are not locked either.
D (Drive): The vehicle moves forward.
B (Regenerative brake): The intensity of regenerative braking increases.
03 Electrical parking switch
Press the switch to lock the wheels when you are parking your vehicle. The indicator lamp on the switch illuminates in green.
04 Battery charge switch
Pressing this switch when the READY indicator is illuminated starts the engine and charges the drive battery to nearly full.
05 Battery save switch
Pressing the switch when the READY indicator is illuminated
reduces battery consumption while driving and will operate the engine more frequently.
06 4WD lock switch
Pressing the switch while driving or during a standstill shifts your vehicle into 4WD LOCK. This mode offers the highest traction and stability typical of a 4WD SUV from low to high speed range—ideal
for low- to medium-speed driving on low-friction dirt roads and for driving on highways in rain or snow. Pressing the switch again puts the vehicle back in NORMAL.
0405
06
03
02
Page 21 of 28
Downloaded from www.Manualslib.com manuals search engine 19
Checking locking/unlocking
You can check as follows whether or not the doors/tailgate are locked/unlocked.
The room lamps blink only when the lamp switch is in the middle () position.
Front door switch
Door switch
OPEN switch
Tailgate switch
LOCK switch
UNLOCK switch
Electric tailgate switch (VRX only)
Convenient features
Component*1Default (factory) setting
LockingUnlocking
Turn-signal lamp1 blink2 blinks
Room lamps—Illuminate for about 15 seconds
Outside buzzer*21 buzzing sound2 buzzing sounds
Locking/unlocking the doors by keyless operation or keyless entry
*1: The factory setting can be changed. For details, contact your MITSUBISHI MOTORS Authorised Service Point.*2: Available with Keyless Operation.
Keyless operationThe front doors and the tailgate can be locked/unlocked by pressing the door switch or the tailgate switch. You need to carry the keyless operation key with you and the key needs to be within its operation range, which is within about 70 cm from the front door handle or the tailgate handle.
Keyless entryPressing the LOCK switch locks all of the doors and the tailgate. Pressing the UNLOCK switch unlocks all of the doors and the tailgate. If you do not open a door or the tailgate within about 30 seconds of pressing the UNLOCK switch, all of the doors and the tailgate are locked again.
If your vehicle is equipped with the electric tailgate, the tailgate can be opened just by pressing
the electric tailgate switch.
LOCK switch
02
03
01
Page 22 of 28
Downloaded from www.Manualslib.com manuals search engine 20
01 Electric remote-controlled
outside rear-view mirrors switch
Angle adjustment
Set the L-R selector lever to the side you want to adjust. Then, using the adjustor switch, move the mirror up or down, or to the left or to the right.
Retractor switch
Press this switch to retract the outside rear-view mirrors. Pressing the switch again reopens the mirrors.
02 Electric window control
All of the door windows can be opened and closed from the switch console beside the driver’s seat. Push down the switch to open the window. Lift up the switch to close the window. If the driver’s door window switch is pushed down hard, the window opens completely. If the driver’s door window switch is lifted up hard, the window closes completely.
Lock switch
Driver’s door window switch
Front passenger’s door window switch
Rear right door window switch
Rear left door window switch
Multi information display switch
Information screen pop-up
Odometer, outside temperature
Fuel remaining amount, selector lever position, drive battery level
If the lock switch is set to ON, it is no longer possible to open or close the front passenger’s and rear door windows using the switches located there. Pressing the lock switch again cancels the lock.
03 Multi information display
Every time the multi information display switch is pressed, a buzzer sounds. The display shows a wide range of information including warnings, service reminder, average fuel consumption, EV cruising range, and energy flow.
L-R selector leverRetractor switch
Adjustor switch
04 Child protectionBy setting the lever on a rear door to LOCK and then closing the door, it is no longer possible to open the door from the inside regardless of the position of the door lock knob.
This safety feature can be used when children are sitting in the rear seats.