lock MITSUBISHI OUTLANDER III 2018 User Guide

Second row seats4-8 Seat and restraint systems
4
N00435601463
The heated seats can
be operated by pushing
the switch when the ignition switch or theoperation mode is in ON. The indicator light(A) will illuminate while the heater is on.
N00402501231
When sitting in the mi
ddle seating position of
the second row seat, adjust the head restraintsto an appropriate height where they lock inposition. Refer to “Hea
d restraints” on page
4-11. Pull the seat adjusting lever up and slide theseat forward or backward to the desired posi-tion. Release the adjusting lever to lock theseat in place.
Heated seat (if so equipped) 1 (HI) - Heater high (for quick heat-
ing)
2 (neutralposition)
- Heater off
Type 1Type 2
3 (LO) - Heater low (to keep the seat
warm)
WA R N I N GPersons who are unable to feel tempera-ture change or skin
pain due to age, ill-
ness, injury, medication, alcohol use,fatigue or other phys
ical conditions or
who have sensitive sk
in may suffer burns
when using the heated seat even at lowtemperatures. To reduce the risk of burns,people with such conditions must use carewhen using the heated seat.CAUTIONSwitch off the heated seats when not in use.Operate the heaters at the “HI” position forquick heating. After the seat has becomewarm, set the heater switch to the “LO” posi-tion to keep it warm. Sl
ight variations in the
seat temperature may be felt while using theheated seats. This is caused by the operationof the heater’s internal thermostat and doesnot indicate a malfunction.Do not place heavy obj
ects on the seat or
stick pins, needles, or
other pointed objects
into the seat.Do not place a blanket,
cushion, or other
insulating material on the seat while usingthe heater; doing so can
cause the heater ele-
ment to overheat.
When cleaning the seat, do not use benzine,kerosene, gasoline, alc
ohol, or other organic
solvents; doing so can cause damage notonly to the surface of the seat, but also to theheater.If water or any other li
quid is spilled on the
seat, allow it to dry thoroughly beforeattempting to use the heater. Turn the heateroff immediately if it
appears to be malfunc-
tioning during use.
Second row seats To adjust the seat forward or backward (vehicles with sec-ond row seat slide function)
CAUTION
BK0249100US.book 8 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Second row seats
Seat and restraint systems 4-9
4
Pull the lever up and adjust the seatback byhand to the desired position, and release thelever. The seatback will lock in place.
NOTE
You can adjust the seat forward or backwardon either side separately.WA R N I N GTo make sure that the seat is securelylocked, try to move
it forward or back-
ward without using
the adjusting lever.
CAUTIONWhen sliding (vehicles with second row seatslide function) or reclin
ing the seat rearward,
pay careful attention to the third row seatpassengers.
To adjust the seatbacks
NOTE
You can adjust the seat
back forward or back-
ward on either side separately.WA R N I N GTo reduce the risk of serious injury ordeath in the event of
an accident or sud-
den stop, all seatbacks should be kept inthe upright position while the vehicle is inmotion.
Seat belt performance during an accidentcan be adversely affect
ed if the seatbacks
are reclined. The more a seatback isreclined, the more likely seat belt perfor-mance will be advers
ely affected. If the
seat belt is not prop
erly positioned against
the body during an accident, there isincreased risk you will slide under the beltand receive serious
injury or death.
When a person is sitting in the middleseating position of the second row seats,the two sides of the second seats must havethe same forward/backward position(vehicles with second row seat slide func-tion) and the same seatback angle.WA R N I N G
BK0249100US.book 9 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Third row seat (Seating 7 passengers)4-10 Seat and restraint systems
4
N00403001318
To use the armrest, tilt the arm rest down foruse as shown.The arm rest includes a cup holder.
N00400101031
For third row seat passenger entry or exit, thesecond row seats can be moved forward.Pull up the lever (A) and tilt the seatback for-ward. Then slide the entire seat forward.
To return the seat, slide the entire seat back-ward to the desired pos
ition and then raise the
seatback until it locks securely.After returning the seat, gently try to move itforward and backward to check that it issecurely retained and adjust the seatback tothe normal seating position.
N00419501073
Pull up the strap and ad
just the seatback by
hand to the desired position, and release thestrap.
Arm rest
NOTE
Never sit on an arm rest.Doing so could damage the arm rest.
Accessing the third row seat (Walk-in function, Seating 7 passengers)
WA R N I N GTo make sure that the seat is securelylocked, try to move it forward or back-ward without using the lever. To reducethe risk of serious in
jury or death in the
event of an accident
or sudden stop, all
seatbacks should be kept in the uprightposition while the ve
hicle is in motion.
Third row seat (Seating 7 passengers)
WA R N I N GThe third row seats are intended for useby no more than two belted occupants,each of which does not exceed 160 cm (63inches) in height.Exceeding these limitations can result inan increased risk of
personal injury or
death in the event
of an accident.
To adjust the seatback
BK0249100US.book 10 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Head restraints
Seat and restraint systems 4-11
4
N00404301594
Head restraints can reduce the risk of a whip-lash injury if your vehicle is hit from the rear.The head restraints are equipped in the illus-trated position.To maximize the effectiveness of the headrestraints, adjust the seatback to the uprightposition, and the head
restraint to the proper
position. Sit back against the seatback withyour head close to the head restraint.Head restraints *: Seating 7 passengers
WA R N I N GDriving without the
head restraints in
place can cause you and your passengersserious injury or deat
h in an accident. To
reduce the risk of in
jury in an accident,
always make sure the head restraints areinstalled and proper
ly positioned when
the seat is occupied.In order to minimize
the risk of a neck
injury due to a rear impact, the seatbackmust be adjusted to the upright positionand the head restraint
must be adjusted to
the proper position
before vehicle opera-
tion. The driver shou
ld never adjust the
seat while the vehicle is in motion.Never place a cushion
or similar device on
the seatback. This can adversely affecthead restraint performance by increasingthe distance betwee
n your head and the
restraint.
When a person sits in the second centerseating position, pull up
the head restraint
to a height at which it locks in position. Besure to make this adjustment before start-ing to drive. Serious injuries could other-wise be suffered in the result of an impact.NOTE
The head restraint height in the second rowoutboard seats and the third row seats cannotbe adjusted.WA R N I N G
BK0249100US.book 11 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Head restraints4-12 Seat and restraint systems
4
To reduce the risk of injury in an accident,adjust the head restraint height so that thecenter of the restrain
t is at your ear level
when seated. Any person too tall for therestraint to reach their ear level when seatedshould raise the restraint to the highest lockedposition.To raise the restraint, pull it straight up.To lower the restraint, push down on itwhile pressing the lock knob (A) in thedirection shown by the arrow.After adjusting the height, push down onthe restraint to make sure it is locked inposition.
Press the lock knob (A) in the directionshown by the arrows. Then pull the headrestraint up and out of the seatback.First check that the head restraint is facing inthe right direction as shown in the previousillustration, and then insert it into the seat-back. Push the head restraint down while
pressing the lock knob (A) until the restraintlocks into place.
Adjustment of the head restraint height (front seats)
To remove
WA R N I N GTo help minimize the risk of neck injury inthe event of an accident, the headrestraints must be properly installed andpositioned to proper height before vehicleoperation.
To install
CAUTIONCheck that the lock knob (A) is extended outas shown in the illustration. Then pull thehead restraint up to make sure that it islocked in place and will
not come out of the
seatback.CAUTIONThe shape and size of the head restraint dif-fers according to the seat. Always use thecorrect head restraint provided for the seatand do not install the he
ad restraint in the
wrong direction.
BK0249100US.book 12 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Making a cargo area4-14 Seat and restraint systems
4
4. On vehicles with th
e second row seat slide
function, move the second row seat fullybackward.Refer to “To adjust the seat forward orbackward” on page 4-8.5. Pull the strap (B), then flip the seat cush-ion forward.
6. Fold forward the seat belt buckle.7. Pull up the lever (D), then fold the seat-back forward.
NOTE
If you do not move the second row seat fullybackward, you may not be able to fold thesecond row seat.
CAUTIONDo not allow any person
to get on the plastic
cover (C), and do not
place luggage on it.
Doing so could damage
the plastic cover.
CAUTIONDo not allow any person to sit on the flippedseat cushion, and do
not place luggage on it.
The seat’s mounting fittings could bendunder the weight, making it impossible forthe seat cushion to be secured when it returnsto the original position.NOTE
If the seatback cannot be folded, follow thesteps below.1. Raise the seatback once until it locks.2. Pull the strap again.3. Pull up the lever, then fold the seatbackforward.
BK0249100US.book 14 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Making a cargo area
Seat and restraint systems 4-15
4
1. Raise the seatback until it locks securelyinto place.2. While lifting the seat belt buckle (A), gen-tly lower the seat cushion. Make sure thatthere is a hook (B) at the position shownin the illustration.
3. Push down the seat cushion until it lockssecurely into place.4. Make sure that all seat belt buckles areproperly positioned on the seat cushion.5. Return the folded head restraint to itsoriginal position.
6. If the center seat
belt is stored;
• Pull out the detachable anchor plate (D)from the seatback.• Pull the small latch plate (E) slowly andinsert it into the detachable anchor plateuntil a click is heard.• Make sure that the seat belt is nottwisted.For details, refer to
“Detachable center
seat belt for second row” on 4-21.
To r e t u r n
NOTE
A rubber strap (C) is atta
ched to the seat belt
buckle for the left out
board seating position.
This helps raise the seat
belt buckle while the
seat cushion returns to the original position.
WA R N I N GEnsure that the head restraints arereturned to their original positions beforethe seats are occupied. Failure to do socould cause serious inju
ry if involved in an
accident.
BK0249100US.book 15 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Making a flat seat4-16 Seat and restraint systems
4
N00409800021
1. Remove the head restraints from the thirdrow seats. (Refer to “Head restraints” onpage 4-11.)2. Pull up the strap (A), then fold the seat-back forward.3. Stow the removed head restraints in theluggage floor box with their front facesfacing downward.
1. Pull the strap (A), then raise the seatbackuntil it locks securely into place.Push lightly on the seatback to confirmthat it has actually been secured.2. Install the head restraints.
N00404801166
The entire interior of the vehicle may be usedfor sleeping accommoda
tions by removing
the head restraints and fully reclining all theseats when the vehicle is stopped.
Folding the third row seats (Seating 7 passengers) To f o l d
To r e t u r n
Making a flat seat
WA R N I N GNever drive with passengers or cargo onthe flat seat. This is extremely dangerousand can cause severe or fatal injury ordeath in an accident
or if heavy braking is
required.CAUTIONAdjust the seats only when the vehicle isstopped in a safe place.Seat should be adjusted only by adults toavoid accidents.When sliding the seat
s, be careful not to
catch your hand or leg.Do not walk around on top of the seats afterthey have been laid flat because the footingis uneven. It is safest to move about on yourhands and knees.To ensure the seats are locked securely,attempt to move them back and forth.Do not jump on or drop heavy objects on theseatbacks.
BK0249100US.book 16 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Making a flat seat
Seat and restraint systems 4-17
4
1. Remove the head restraints from the frontseats and raise the arm rest on the secondrow seats.For vehicles with a cargo area cover,remove the cover.(Refer to “Head restraints” on page 4-11,“Arm rest” on page 4-10 and “Cargo areacover” on page 5-244.)2. Slide the second row seats back as far aspossible (vehicles with second row seatslide function).(Refer to “To adjust the seat forward orbackward” on page 4-8.)
3. Slide the front seats fully forward, thenrecline their seatbacks backward toachieve a flat surface.(Refer to “To adjust the seat forward orbackward” on page 4-5 and “To adjust theseatback” on page 4-6.)4. Recline the seatbacks of the second rowseats.(Refer to “To adjust the seatback” on page4-8.)
plete.To return the seats to the normal position,reverse the above procedure.
To raise the seatback of the front seat, firmlyplace your hand on the
seatback, pull the
seatback lock knob up, and raise the seatbackslowly. (Refer to “To adjust the seatback” onpage 4-6.) Do not let children adjust the seat-back.CAUTION
BK0249100US.book 17 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts
Seat and restraint systems 4-19
4
N00406201513
All seats are equipped with a seat belt whichuses one combined lap-and-shoulder belt withan emergency locking retractor.This system is designed to provide both com-fort and safety. It perm
its full extension and
automatic retraction of the belts during nor-mal vehicle operation.
A sensing device
inside the belt retractor is designed to lock theretractor in the event of a sudden change inthe vehicle’s motion.
1. Occupants should always
sit back in their
seats with their backs against the uprightseatback. To reduce
the risk of serious
injury or death during deployment of theairbag, adjust the driver’s seat as far backas possible while maintaining a positionthat still enables you to fully apply thepedals, easily control the steering wheel,and safely operate the vehicle. The frontpassenger seat should also be moved asfar back as possible. Refer to “Supple-mental Restraint System (SRS) - airbag”on page 4-35. Also refer to “To adjust theseat forward or backward” on page 4-5.
2. Before using the center seat belt for sec-ond row, make sure that the detachableanchor is securely
latched and the seat
belt is not twisted. For details, refer topage 4-21.
Seat belt instructions
NOTE
For instructions on installing a child restraintsystem using a seat belt
, refer to “Installing a
child restraint system
using the seat belt” on
page 4-32.
WA R N I N GTo reduce the risk of serious injury ordeath in the event of
an accident or sud-
den stop, all seatbacks should be kept inthe upright position while the vehicle is inmotion.Seat belt performance during an accidentcan be adversely affect
ed if the seatbacks
are reclined. The more a seatback isreclined, the more likely seat belt perfor-mance will be advers
ely affected. If the
seat belt is not prop
erly positioned against
the body during an accident, there isincreased risk you will slide under the beltand receive serious
injury or death.
BK0249100US.book 19 ページ ２０１７年５月１０日　水曜日　午前８時４９分