child lock MITSUBISHI OUTLANDER III 2018 Owners Manual

Seats and restraint systems4-4 Seat and restraint systems
4
N00401601251
Your vehicle has seat
belts and other safety
features that help protect you and your pas-sengers in an accident.Seat belts are the most important safetydevice. When worn properly, seat belts canreduce the chance of serious injury or deathin various types of crashes. For added protec-tion during a severe fr
ontal collision, your
vehicle has a Supplemental Restraint System(SRS) with airbags for the driver and passen-gers. The seats, head restraints, and doorlocks also are safety equipment, which mustbe used correctly.Always check the following before you drive:That everyone in your vehicle is properlywearing their seat belt.That infants and small children are prop-erly secured in an appropriate childrestraint system in the rear seat.That all doors are fully closed and locked.That seatbacks are upright, with headrestraints properly adjusted.
Safety equipment cannot prevent injury ordeath in all motor ve
hicle accidents. How-
ever, you can help reduce the risk of injury ordeath, by following the instructions in thismanual.
N00401801426
Position the driver’s seat
as far back as possi-
ble while maintaining a position that stillenables you to fully apply the pedals, easilycontrol the steering wh
eel and safely operate
the vehicle.
Seats and restraint systems
WA R N I N GDo not place objects under the seats. Thiscould prevent the seat from lockingsecurely, and it could
lead to an accident.
It may also cause damage to the seat orother parts.
Front seats
WA R N I N GDo not attempt to adjust the seat whiledriving. This can cause loss of vehicle con-trol and result
in an accident.
Manual seat adjustment Power seat adjustment
After adjusting the seat, make sure that itis securely locked into position.To reduce the risk to the driver of seriousinjury or death duri
ng deployment of the
driver’s airbag, always
properly wear the
seat belt and adjust th
e driver’s seat as far
back as possible while maintaining a posi-tion that still enables
you to fully apply the
pedals, easily control the steering wheel,and safely operate the vehicle.To reduce the risk to the front passengerof serious injury or
death during deploy-
ment of the passeng
er’s airbag, always
properly wear the seat
belt and adjust the
front passenger’s seat as far back as possi-ble.Always place childr
en 12 years old and
under in the rear seat
and use appropriate
child restraint systems.CAUTIONMake sure that the seat is adjusted by anadult. If it is adjusted by a child, an unex-pected accident might occur.Do not place a cushion
or the like between
your back and the seatback while driving.The effectiveness of the head restraints willbe reduced in the event of an accident.When sliding the seat
s, be careful not to
catch your hand or leg.WA R N I N G
BK0249100US.book 4 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Making a flat seat
Seat and restraint systems 4-17
4
1. Remove the head restraints from the frontseats and raise the arm rest on the secondrow seats.For vehicles with a cargo area cover,remove the cover.(Refer to “Head restraints” on page 4-11,“Arm rest” on page 4-10 and “Cargo areacover” on page 5-244.)2. Slide the second row seats back as far aspossible (vehicles with second row seatslide function).(Refer to “To adjust the seat forward orbackward” on page 4-8.)
3. Slide the front seats fully forward, thenrecline their seatbacks backward toachieve a flat surface.(Refer to “To adjust the seat forward orbackward” on page 4-5 and “To adjust theseatback” on page 4-6.)4. Recline the seatbacks of the second rowseats.(Refer to “To adjust the seatback” on page4-8.)
plete.To return the seats to the normal position,reverse the above procedure.
To raise the seatback of the front seat, firmlyplace your hand on the
seatback, pull the
seatback lock knob up, and raise the seatbackslowly. (Refer to “To adjust the seatback” onpage 4-6.) Do not let children adjust the seat-back.CAUTION
BK0249100US.book 17 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts
Seat and restraint systems 4-19
4
N00406201513
All seats are equipped with a seat belt whichuses one combined lap-and-shoulder belt withan emergency locking retractor.This system is designed to provide both com-fort and safety. It perm
its full extension and
automatic retraction of the belts during nor-mal vehicle operation.
A sensing device
inside the belt retractor is designed to lock theretractor in the event of a sudden change inthe vehicle’s motion.
1. Occupants should always
sit back in their
seats with their backs against the uprightseatback. To reduce
the risk of serious
injury or death during deployment of theairbag, adjust the driver’s seat as far backas possible while maintaining a positionthat still enables you to fully apply thepedals, easily control the steering wheel,and safely operate the vehicle. The frontpassenger seat should also be moved asfar back as possible. Refer to “Supple-mental Restraint System (SRS) - airbag”on page 4-35. Also refer to “To adjust theseat forward or backward” on page 4-5.
2. Before using the center seat belt for sec-ond row, make sure that the detachableanchor is securely
latched and the seat
belt is not twisted. For details, refer topage 4-21.
Seat belt instructions
NOTE
For instructions on installing a child restraintsystem using a seat belt
, refer to “Installing a
child restraint system
using the seat belt” on
page 4-32.
WA R N I N GTo reduce the risk of serious injury ordeath in the event of
an accident or sud-
den stop, all seatbacks should be kept inthe upright position while the vehicle is inmotion.Seat belt performance during an accidentcan be adversely affect
ed if the seatbacks
are reclined. The more a seatback isreclined, the more likely seat belt perfor-mance will be advers
ely affected. If the
seat belt is not prop
erly positioned against
the body during an accident, there isincreased risk you will slide under the beltand receive serious
injury or death.
BK0249100US.book 19 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts4-20 Seat and restraint systems
4
3. Grasp the latch plate and slide it up thewebbing so that it ea
sily pulls across your
body. 4. Pull the seat belt out slowly while holdingthe latch plate. Push the latch plate intothe buckle until you hear a “click”. Pullup on the belt to be su
re the latch plate is
locked securely in the buckle.
5. The lap part of the belt must always beworn low and snug across the hips. Pullup on the shoulder portion of the belt totake up any slack
in the lap belt.
NOTE
If the seat belt lock
s up and cannot be pulled
out, pull it once with fo
rce and let it retract
all the way. Then, pull the belt out
slowly once again.
NOTE
With the exception of the seat belt for thedriver, the seat belts in
all other seating posi-
tions are equipped with an Automatic Lock-ing Retractor (ALR) function. If you pull theseat belt fully out of th
e retractor, the retrac-
tor will switch to its ALR child restraintinstallation function (see page 4-32).When the ALR function has been activated,the seat belt will only re
tract. If this happens,
let the belt fully retract, then pull the seatbelt back out, repeating steps 1 through 4.WA R N I N GBe sure the lap belt portion fits snugly andis worn as low as possible across the hips,not around the waist. Failure to follow thisinstruction will increase the risk of seriousinjury or death in the
event of an accident.
Be sure the seat belt webbing is nottwisted when worn. Twisted webbing mayadversely affect seat belt performance.
BK0249100US.book 20 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts4-22 Seat and restraint systems
4
3. Pull the small latch plate (A) slowly andinsert it into the detachable anchor plateuntil a click is heard. Make sure that theseat belt is not twisted.
1. While holding the seat belt, insert a metalplate, such the latch plate of the seat beltor a key, into the slit (E) on the detachableanchor (C) and release the center seat beltfrom the detachable anchor.2. Retract the seat belt slowly by holding theseat belt.
3. After the seat belt has retracted com-pletely, insert the latch plate (B) into theupper slit (F), and then insert the smalllatch plate (A) into the lower slit (G).4. Store the detachable anchor in the storagepocket on the seatback.
NOTE
If the seat belt locks
up and cannot be pulled
out, pull it once with force and let it retractall the way.Then, pull the belt out
slowly once again.
The seat belt can be
buckled up by inserting
the latch plate (B) in
to the buckle (D) like
other seat belts.If the seat belt switch to the ALR childrestraint installation
function and cannot be
pulled out, detach the
latch plate (B) and
move the second row seat fully backward.Refer to “Installing a child restraint systemusing the seat be
lt” on page 4-32.
To d e t a c h
NOTE
If the seat belt is not held, the seat belt willrapidly retract. This
could cause damage to
the interior trim.
BK0249100US.book 22 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts4-24 Seat and restraint systems
4
N00406301354
The seat belt shoulder
anchor height can be
adjusted. To move the anchor down, press thelock knob (A) and slide the anchor down tothe desired position. To move the anchor up,slide the anchor up to the desired position.
N00406501112
When seat belts for the second row outboardseating position and for the third row are notused, the seat belts can be stored.
WA R N I N GWhen a child booster se
at is used on the
front passenger seat, the front passengerseat belt warning ligh
t will not come on, if
the seat belt is not fastened when thebooster seat is used
. Confirm that the
child is wearing the
seat belt properly.
Do not install any acce
ssory or sticker that
makes the light difficult to see.
Adjustable seat belt shoulder anchor (front seats) Anchor down Anchor up
WA R N I N GAlways adjust the shou
lder belt anchor so
that the shoulder belt
is positioned across
the center of your shoulder without touch-ing your neck. The sh
oulder belt should
not be able to fall off your shoulder. Fail-ure to follow this instruction can adverselyaffect seat belt performance and increasethe risk of serious in
jury or death in the
event of an accident.Adjust the shoulder be
lt anchor only when
the vehicle is not in motion.Make sure the anchor is securely locked inposition after adjusting it.
Storing the second row (out-board seating positions) and third row seat belts
BK0249100US.book 24 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Child restraint systems4-32 Seat and restraint systems
4
N00407301553
With the exception of the driver, the seat beltin all other seating pos
itions can be converted
from normal Emergency Locking Retractor(ELR) mode, to Automatic Locking Retractor(ALR) mode. This mean
s that when you pull
the seat belt fully out of the retractor, theretractor will switch to its ALR child restraint
installation function.
Always use the ALR
child restraint installation function when youinstall a child restraint system using the seatbelt.Children 12 years old and under shouldalways be restrained in the rear seat, when-ever possible, although the front passengerseat belt can also be converted to ALR mode.
1. Place the child restraint system on the seatwhere you wish to install it.To help assure proper fitting of the childrestraint system, alwa
ys remove the head
restraint.When installing the front-facing childrestraint system on the second row seat,adjust the angle of the second row seat-back to the most upright position.
When using a child restraint in a rearseating position, always review theinstructions provided with that restraintto make sure it is compatible with thisvehicle and to understand how to properlyinstall it.Child restraints, incl
uding booster seats,
come in different sizes and configurations.Depending on where you
place these child
restraints, and depending on their size andconfiguration, you may not be able toaccess or properly use one or more adja-cent seat belt assemblies. If this occurs,the adjacent seating po
sition or positions
should not be used. Failure to use a seatbelt or improper use of a seat belt canresult in serious inju
ry or death should a
crash occur.
Installing a child restraint sys-tem using the seat belt (with emergency/auto
matic locking
mechanism)
WA R N I N G
WA R N I N GWhen you install a child restraint systemusing the seat belt, al
ways make sure the
retractor has been switched to the ALRchild restraint installation function. TheALR function will keep the child restraintsystem tightly secured to the seat.Failure to convert the retractor to theALR function may allow the childrestraint system to move forward duringsudden braking
or an accide
nt, resulting
in serious injury or
death to the child or
other occupants.
When using a child restraint in a rearseating position, al
ways review the
instructions provided with that restraintto make sure it is compatible with thisvehicle and to understand how to properlyinstall it.Child restraints, including booster seats,come in different sizes and configurations.Depending on where you
place these child
restraints, and depending on their size andconfiguration, you may not be able toaccess or properly use one or more adja-cent seat belt assemblies. If this occurs,the adjacent seating po
sition or positions
should not be used. Failure to use a seatbelt or improper use of a seat belt canresult in serious inju
ry or death should a
crash occur.
Installation
WA R N I N G
BK0249100US.book 32 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Child restraint systems
Seat and restraint systems 4-33
4
2. Route the seat belt through the childrestraint system acco
rding to the instruc-
tions provided by the child restraint sys-tem’s manufacturer. Then insert the seatbelt latch plate into
the buckle. Make sure
you hear a “click” when you insert thelatch plate into the buckle.
3. To activate the ALR child restraint instal-lation function, slowly pull the shoulderpart of the belt all the way out of theretractor until it stops. Then let the beltfeed back into the retractor.4. After the belt has retracted, tug on it.If the belt is in the ALR function, you willnot be able to pull it out. If the webbingcan be pulled out from retractor, the ALRfunction has not been activated and youwill need to repeat steps 3 and 4.
5. After confirming that the belt is locked,grab the shoulder part of the belt near thebuckle and pull up to remove any slackfrom the lap part of the belt allowing theslack to feed into the retractor. Remember,if the lap belt portion is not tight, the childrestraint system
will not be secure. It may
help to put your weight on the childrestraint system and/or push on its seat-back while pulling up on the belt (Seeillustration).
If your child restraint system requires the useof a tether strap, fasten the tether strap inaccordance with the following procedures.
BK0249100US.book 33 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Maintenance and inspection of seat belts4-34 Seat and restraint systems
4
6. Latch the tether strap hook (A) of thechild restraint system to the tether anchorbar (B) and tighten the tether strap so it issecurely fastened.
7. Before putting your child in the restraint,push and pull the restraint in all directionsto be sure it is firmly secure. Do thisbefore each use. If the child restraint sys-tem is not firmly s
ecure, repeat steps 1
through 6.8. To remove a child restraint system fromthe vehicle and deac
tivate the ALR mode,
remove the child from the restraint.Unlatch the buckle. Th
en remove the belt
from the restraint and let the belt fullyretract.9. Reinstall the head restraint.Refer to “Head restraints” on page 4-11.
N00407601628
Children who have outgrown a child restraintsystem should be seated in the rear seat andwear the seat belt. If the shoulder belt crossestheir face or neck, and/
or the lap belt crosses
their stomach, a commercially availablebooster seat must be used to raise the child sothat the shoulder belt
crosses their shoulder
and the lap belt remains positioned lowacross their hips. The booster seat should fitthe vehicle seat and ha
ve a label certifying
compliance with Federal Motor VehicleSafety Standards or Mo
tor Vehicle Restraint
Systems and Booster Se
ats Safety Regula-
tions.
N00407001390
Regularly check your seat belt buckles andtheir release mechanisms for positive engage-ment and release of the latch plate. Check theretractors for automatic locking when in theAutomatic Locking Retractor function.The entire seat belt assembly should bereplaced if the webbing shows any obvious
NOTE
If it is difficult to la
tch the tether strap hook,
turn the hook sideways.WA R N I N GChild restraint system tether anchors aredesigned only to with
stand loads from cor-
rectly fitted child restraint systems. Underno circumstances are they to be used foradult seat belts, harnesses, for attachingother items, or equipment to the vehicle.
Children who have outgrown child restraint systems
WA R N I N GAny child who is too small to properlywear a seat belt
must be properly
restrained in an appropriate childrestraint system, to reduce their risk ofserious injury or de
ath in an
accident.
A child should never be
left unattended in,
or unsupervised around, your vehicle.When you leave the ve
hicle, always take
the child out as well.Children can die from heat stroke if left ortrapped inside the vehicle, especially onhot days.Keep your vehicle locked when not in use.Keep your vehicle keys away from chil-dren.
Maintenance and inspection of seat belts
BK0249100US.book 34 ページ ２０１７年５月１０日　水曜日　午前８時４９分

5
Features and controlsBreak-in recommendations ..............................................................5-3Keys .................................................................................................5-3Electronic immobilizer (Anti-theft starting system) ........................5-4Keyless entry system (if so equipped) ..............................................5-7Free-hand Advanced Security
Transmitter (F.A.S.T.-key)
(if so equipped) ..........................................................................5-13Door locks ......................................................................................5-34Power door locks ......
...........
...........
...........
...........
...........
.........
.....5-36
Child safety locks for rear door ..........
...........
.........
.........
.........
.....5-37
Liftgate (except for vehi
cles equipped with the
power liftgate) ....5-38
Power liftgate (if so equipped) .......................................................5-39Inside liftgate release .....................................................................5-46Theft-alarm system ........................................................................5-46Power window control ...................................................................5-49Sunroof (if so equipped) .................................................................5-51Parking brake .................................................................................5-53Steering wheel height and reach adjustment ..................................5-57Inside rearview mirror ...................................................................5-57Outside rearview mirrors ...............................................................5-60Ignition switch (if so equipped) ......................................................5-63Steering wheel lock (if so equipped) ..............................................5-65Starting the engine .........................................................................5-66Automatic transaxle (if so equipped)..............................................5-68Continuously variable transmission
(CVT) (if so equipped)..........5-75
Electronically controlled
4WD system (if so equipped).................5-82
S-AWC (Super-All Wheel Control) (if
so equipped) .....................5-85
4-wheel drive operation .................................................................5-88Inspection and maintenance followi
ng rough road operation ........5-91
Cautions on the handling of 4-wheel dr
ive vehicles ..................... 5-91
Service brake ................................................................................. 5-92Brake auto hold (if so equipped) .................................................... 5-93Hill start assist (if so equipped) ...................................................... 5-95Brake assist system ........................................................................ 5-96Anti-lock braking system .............................................................. 5-97Electric power steering system (EPS) ........................................... 5-99Active stability control (ASC) ..................................................... 5-100Cruise control (if so equipped) ..................................................... 5-103Adaptive Cruise Control System (ACC)
(if so equipped) ............ 5-107
Forward Collision Mitigation System
(FCM) (if so equipped) .... 5-118
Blind Spot Warning (BSW) (w
ith Lane Change Assist)
(if so equipped) ........................................................................ 5-126Rear Cross Traffic Alert (RCTA) (if so equipped) ....................... 5-131Lane Departure Warning System (LDW
) (if so equipped)........... 5-134
Tire pressure monitoring system ................................................. 5-137Rear-view camera (if so equipped)............................................... 5-142Multi Around Monitor (if so
equipped)..................
...........
........... 5-144
Instrument cluster ........................................................................ 5-154Multi Information display - Type 1 ............................................. 5-155Multi Information display - Type 2 ............................................. 5-173Indicator light, warning light, and information screen display list (multi informati
on display - Type 1) .......... 5-181
Indicator and warning light package (multi information display - Type 2) ....................................... 5-201Indicators ..................................................................................... 5-202Warning lights .............................................................................. 5-203
BK0249100US.book 1 ページ ２０１７年５月１０日　水曜日　午前８時４９分