Setting NISSAN 350Z 2003 Z33 Navigation Manual

INFO:
When the
Last 5 States key is selected in
step 2, the previous five settings will be listed.3. The display shows the state/province list.
Select a state/province name.4. The screen returns to the [DEST . SETTINGS
(Intersection)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key .
Input the street name.
Please refer to “Setting with the
List key”
on page 5-13.
INV1513INV1514INV1515
HOW DO I PROGRAM A DESTINATION?
5-16

Setting with theCitykey
TheCity key is used to select an intersection
from the specified city to set the destination.
1. Select the
City key .

The display shows the screen to select cit-
ies.2. Input a city name.INFO:

When the
Last 5 Cities key is selected in
step 2, the previous five settings will be
listed.

It is not possible to select cities if they are
not in the state/province you set.
3. The display shows the city list.
Select a city of your choice.
INV1516INV1517
INV1518
INV1519
HOW DO I PROGRAM A DESTINATION?
5-17

4. The screen returns to the [DEST . SETTING
(Intersection)] screen.
When the city is set, the display shows the
selected city next to the
City key .
Input the street name of your choice.
Proceed to “Setting with the
List key” on
page 5-13.
SETTING WITH THE
Point of Interest (POI)KEY
The NISSAN Navigation System includes a da-
tabase of Point of Interest (POI) locations such
as restaurants, hotels, and gas stations. (refer
to section 6.)
By using this feature, you can set a Point of
Interest location as a destination. For details on
how to use the POI feature, please refer to sec-
tion 6.
SETTING WITH THECityKEY
Sets the destination (waypoints) on the map
screen of the area in and around the input city .
1. Press the DEST button.
2. Select the
City key on the [DEST . SET -
TINGS] screen.
INV1520INV1521
INV1522
HOW DO I PROGRAM A DESTINATION?
5-18

Setting with theListkey
TheList key is used when you know the
names of the destination and waypoints.
1. Enter the characters of the city name which
you wish to set as a destination (waypoints)
using the keyboard on the [DEST . SET -
TINGS (City)] screen, then select the
List
key .
INFO:

When the
List key is selected, the data of
the currently-listed cities will be displayed.
If less than 5 suggested cities remain, they
will be displayed automatically without se-
lecting the
List key .
2. Select the city name of your destination
(waypoints) on the [DEST . SETTINGS
(City)] screen.3. T o set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV1523
INV1524
INV1525
HOW DO I PROGRAM A DESTINATION?
5-19

4. T o slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints).5. If necessary , operate the joystick to adjust
the location of the destination (waypoints).
Press the PUSH ENTER button. Select the
Destination key to confirm.
The [DEST . SETTINGS (City)] screen will
be displayed.
T o set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
Setting with theStatekey
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key .
INV1526INV1527INV1528
HOW DO I PROGRAM A DESTINATION?
5-20

2. The display shows the screen to select
states/provinces.
Input a state/province name.INFO:
When the
Last 5 States key is selected in
step 2, the previous five settings will be listed.3. The display shows the state/province list.
Select a state/province name.
INV1529INV1530INV1531
HOW DO I PROGRAM A DESTINATION?
5-21

4. The screen returns to the [DEST . SETTINGS
(City)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key .
Input the city name.
Please refer to “Setting with the
List key”
on page 5-19.
SETTING WITH THE
Phone NumberKEY
Sets the destination (waypoints) on the map
screen of the area and around the input phone
number .
1. Press the DEST button.
2. Select the
Phone Number key on the
[DEST . SETTINGS] screen.3. Enter the ten-digit phone number of the
destination (waypoints) using the keyboard
on the [DEST . SETTINGS (Phone Number)]
screen.
4. If you select the
OK key , the [DEST . SET -
TINGS (Phone Number)] screen will be dis-
played.
INV1532
INV1533
INV1534
HOW DO I PROGRAM A DESTINATION?
5-22

INFO:
When a hospital is set as a destination, a tele-
phone number of the destination will be dis-
played, if available.
SETTING WITH THEMapKEY
This will enable you to zoom into the map for
detail and set the desired location. This works
best when you know the location geographi-
cally , or want to check the geographical sur-
roundings on the map before setting the des-
tinations.1. Press the DEST button.
2. Select the
Map key .
The map of the entire area will be displayed.3. Operate the joystick to choose the destina-
tion (waypoints).
INV1538INV1539INV1540
HOW DO I PROGRAM A DESTINATION?
5-24

4. Adjust the location using the joystick, and
press the PUSH ENTER button.
5. Select the
Destination key .
The [DEST . SETTINGS] screen will appear .6. Please refer to “Making the system guide
the route with detailed options” on page
5-27.
INFO:
When the
OK key is selected in the [DEST .
SETTINGS] screen, route calculation starts. If
you want to add waypoints, select the
Waypoint key .
SETTING WITH THECountryKEY
When theAddress/Street ,Intersection ,
City,orPoint of Interest (POI)key is used
to set the destination (waypoints) in other
countries, they are retrieved from the areas in
the country which has been set in the country
category . When setting the destination
(waypoints) in other countries, select a country
first.
1. Press the DEST button.
INV1541INV1542
INV1543
HOW DO I PROGRAM A DESTINATION?
5-25

The [DEST . SETTINGS] screen will be dis-
played.
Select the
Country key .
2. Select the
Country key .
Each time the PUSH ENTER button is
pressed, the country selection toggles be-
tween USA and Canada.
3. Then, the selected country will be displayed
at the right of the
Country key .
SETTING WITH THEHomeKEY
(IN EASY MODE)
Sets the home as a destination.
INFO:
In the Expert Mode, this key will not be dis-
played. T urn on the highlighted green
Short Menus key in the [SETTINGS] screen.
1. Press the DEST button.
2. Select the
Home key .3. The [DEST . SETTINGS] screen will be dis-
played.
Select the
OK key .
T o set the destination (waypoints), refer to
“Making the system guide the route with de-
tailed options” on page 5-27.
INFO:
If the home is not registered in the Address
Book, the [EDIT ADDRESS BOOK
(Address/Street)] screen will be displayed.INV1544
INV1454
INV1546
HOW DO I PROGRAM A DESTINATION?
5-26