roof NISSAN 350Z 2007 Z33 Audio Visual, Navigation And Telephone System

AV-46
AUDIO
Revision: 2006 November2007 350Z
Removal and Installation of Audio Unit (Base system)NKS002BH
REMOVAL
1. Remove cluster lid C. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (A), and remove audio unit (1).
3. Remove screws (8), and remove bracket.
INSTALLATION
Installation is the reverse order of removal.
Locking CD Auto Changer Mechanism (Audio unit of BOSE system)NKS002BI
CAUTION:

Prior to removing a malfunctioning CD auto changer unit (Audio unit of BOSE system) that will be
shipped for repair, the changer mechanism MUST BE LOCKED to prevent the mechanism from
being damaged during shipping.

If a CD is jammed or unable to be removed from the unit, do NOT lock the changer mechanism. If
the unit is to be shipped for repair, carefully package the unit to prevent vibration and shock.
DAMPER LOCK PROCEDURE
1. Eject and remove any CDs from the audio unit (BOSE system).
2. Turn ignition switch OFF. Wait until audio unit (BOSE system) display is off and mechanism stops moving
(mechanism sound stops).
3. Press any one of the disc selection buttons once. When a display shows on the audio unit (BOSE sys-
tem), press the same disc selection button again within 5 seconds.

The changer mechanism will lock itself within 10 seconds.
4. After mechanism stops moving (mechanism sound stops), open the driver and passenger window, and
then disconnect negative battery cable.
CAUTION:
After the battery cables are disconnected, do not open/close the driver and/or front passenger door
with the window in the full up position. The automatic window adjusting function will not work and the
side roof panel may be damaged.
NOTE:
After installing a new or remanufactured audio unit (BOSE system), switching the audio unit (BOSE system)
ON will automatically unlock the mechanism. A special unlocking procedure is not required.
SKIB7343E
PKIA1765E

AUDIO
AV-51
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2006 November2007 350Z
Removal and Installation of Satellite Radio TunerNKS002EF
REMOVAL
: Vehicle front
1. Remove trunk side box. Refer to EI-39, "
Removal and Installation (for Coupe Models)" .
2. Remove luggage floor carpet and spare tire cover. Refer to EI-39, "
Removal and Installation (for Coupe
Models)" .
3. Remove screws (A), and remove satellite radio tuner (1).
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation of Satellite Radio AntennaNKS002EL
REMOVAL
: Vehicle front
1. Remove headlining. Refer to EI-44, "
Removal and Installation (for Coupe Models)" .
2. Remove nut (A), and then disconnect connector (1).
3. Remove satellite radio antenna.
INSTALLATION
Installation is the reverse order of removal.
SKIB7344E
SKIB7354E
Roof antenna mounting nut : 6.0 N·m (0.61 kg-m, 53 in-lb)