air bleeding NISSAN 350Z 2007 Z33 Brake Control System Workshop Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2007, Model line: 350Z, Model: NISSAN 350Z 2007 Z33Pages: 134, PDF Size: 3.81 MB
Page 36 of 134
BRC-36
[ABS]
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)
Revision: 2006 November2007 350Z
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)PFP:47660
Removal and InstallationNFS0002L
COMPONENTS
Pay attention to the following when removing actuator.
CAUTION:
Before servicing, disconnect battery cables.
To remove brake tube, use flare nut wrench to prevent flare nuts and brake tube from being dam-
aged. To install, use flare nut wrench (commercial service tool).
Do not remove and install actuator by holding harness.
After work is completed, bleed air from brake piping. Refer to BR-11, "Bleeding Brake System" .
Be sure to securely connect the ground cable.
SFIA0631E
Page 75 of 134
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)
BRC-75
[TCS/ABS]
C
D
E
G
H
I
J
K
L
MA
B
BRC
Revision: 2006 November2007 350Z
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)PFP:47660
Removal and InstallationNFS0003P
COMPONENTS
Pay attention to the following when removing actuator.
CAUTION:
Before servicing, disconnect battery cables.
To remove brake tube, use a flare nut wrench to prevent flare nuts and brake tube from being dam-
aged. To install, use flare nut wrench (commercial service tool).
Do not remove and install actuator by holding harness.
After work is completed, bleed air from brake piping. Refer toBR-11, "Bleeding Brake System" .
Be sure to securely connect the ground cable.
SFIA0631E
Page 131 of 134
VDC/TCS/ABS ACTUATOR
BRC-131
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
MA
B
BRC
Revision: 2006 November2007 350Z
VDC/TCS/ABS ACTUATORPFP:47660
Removal and InstallationNFS00051
COMPONENTS
Pay attention to the following when removing actuator.
CAUTION:
Before servicing, disconnect battery cables.
To remove brake tube, use flare nut wrench to prevent flare nuts and brake tube from being dam-
aged. To install, use flare nut wrench (commercial service tool).
Do not remove and install actuator by holding harness.
After work is completed, bleed air from brake piping. Refer to BR-11, "Bleeding Brake System" .
Be sure to securely connect the ground cable.
SFIA0971E