rear view mirror NISSAN ALMERA 2001 Service Manual

Removal and Installation ...........................................75
REAR VIEW MIRROR...................................................76
Removal and Installation ...........................................76
REMOVAL...............................................................76
INSTALLATION........................................................76BODY (ALIGNMENT)....................................................77
Alignment ...................................................................77
ENGINE COMPARTMENT........................................78
UNDERBODY..........................................................80
CONTENTS(Cont'd)
BT-2

Removal and InstallationNJBT0025REMOVALNJBT0025S01
SBT880
SBT822
INSTALLATIONNJBT0025S021. Install mirror base as follows:
a. Determine mirror base position on windshield by measuring
from top of windshield to top of mirror base as shown in the
figure.
b. Mark location on outside of windshield with wax pencil or
equivalent.
c. Clean attaching point on inside of windshield with an alcohol-
saturated panel towel.
d. Sand bonding surface of mirror base with sandpaper (No. 320
or No. 360).
e. Clean bonding surface of mirror base with an alcohol-saturated
paper towel.
f. Apply Loctite Adhesive 11067-2 or equivalent to bonding sur-
face of mirror base.
g. Install mirror base at premarked position and press mirror base
against glass for 30 to 60 seconds.
h. After five minutes, wipe off excess adhesive with an alcohol-
moistened paper towel.
2. Install rearview mirror.
REAR VIEW MIRROR
Removal and Installation
BT-76