"'-Passenger airbag bracket
(KV99105300) Deploymentofdriver's airbag module (outside of
vehicle)
1. Make an8.5 mm (0.335 in)diameter holeinpassenger air
bag bracket (SST:KV99105300) atthe position showninfig-
ure atleft.
2. Using wire,secure airbag module topassenger airbag
bracket (SST:KV99105300) attwo places.
CAUTION:
Use wire ofal least 1mm (0.04 in)diameter.
3. Firmly secure passenger airbag bracket (SST:KV99105300)
with airbag module attached, inavise.
4. Connect deployment tool(SST: KV99106400) toair bag mod-
ule connector.
5. Connect redclip ofdeployment tooltobattery positive ter-
minal andblack cliptonegative terminal.
6. The lamp onthe right sideofthe tool, marked "deployment
tool power", shouldglowgreen, notred.
7. Press thebutton onthe deployment tool.Theleftside lamp
on the tool, marked "airbagconnector voltage",willillumi-
nate andtheairbag module willdeploy.
CAUTION:
When deploying theairbag module, standatleast 5m (16
ft)
away fromtheairbag module.
SRS141
SUPPLEMENTAL
RESTRAINTSYSTEM(SRS)
Disposal ofAir Bag Module andSeat Belt
Pre-tensioner (Cont'd)
DEPLOYMENT PROCEDURES FORAIRBAG MODULE
(OUTSIDE OFVEHICLE)
Unless thevehicle isbeing scrapped, deployingtheairbag in
the vehicle isnot recommended. Thismaycause damage tothe
vehicle interior.
Anchor airbag module inavise secured toafirm foundation
during deployment.
15
(0.59) 15(0.59)
°170
('.89~
Air bag module
Passenger
air
bag bracket
(KV99105300)
Passenger
air
bag bracket
(KV991 05300)
•.
5~335) dl"~
Deployment tool
(KV99106400)
mm
(in)
SRS020-A
15 (0.59) 15(0.59)
°'70 (.... ~
Deployment
ofpassenger airbag module (outside of
vehicle)
1. Make an8.5 mm (0.335 in)diameter holeinpassenger air
bag bracket (SST:KV99105300) atthe position showninfig-
ure atleft.
Passenger airbag bracket
(KV99105300)
mm (in)
SRS141
RS-20
