seat NISSAN ALTIMA 2016 L33 / 5.G Warranty Booklet

1 WARRANTY COVERAGE AT A GLANCE
2 NISSAN’S CUSTOMER CARE PROGRAM
4 NISSAN’S COMMITMENT TO CUSTOMERSATISFACTION
5 2016 NEW VEHICLE LIMITED WARRANTY
9 FEDERAL VEHICLE EMISSION CONTROL LIMITED WARRANTIES
12 CALIFORNIA VEHICLE EMISSION CONTROL WARRANTIES
18 SEAT BELT LIMITED WARRANTY
19 DROP IN BEDLINER LIMITED WARRANTY
20 BFGOODRICH TIRE LIMITED WARRANTY 22 BRIDGESTONE FIRESTONE TIRE LIMITED
WARRANTY
25 GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
32 CONTINENTAL/GENERAL TIRE LIMITED WARRANTY
35 HANKOOK TIRE LIMITED WARRANTY
38 KUMHO TIRE LIMITED WARRANTY
41 MICHELIN TIRE LIMITED WARRANTY
43 TOYO TIRE LIMITED WARRANTY
48 YOKOHAMA TIRE LIMITED WARRANTY
50 FALKEN TIRE LIMITED WARRANTY
TABLE OF CONTENTS

Summary of Warranty Coverage*
0 miles90,000 mi
Basic Coverage 36 months / 36,000 miles
Corrosion Coverage (Perforation) 60 months / unlimited mileage
Powertrain Coverage 60 months / 60,000 miles
Federal Emission Performance 24 months / 24,000 miles
Federal Emission Defect 36 months / 36,000 miles
Federal Emission Long Term Defect 96 months / 80,000 miles
California Emission Performance 36 months / 50,000 miles
California Emission Defect 36 months / 50,000 miles
California Emission Long Term Defect 84 months / 70,000 miles
Seat Belt 120 months / unlimited mileage
* See the express terms of the appropriate warranty printed in this booklet, which terms control if there is a conflict with this chart.
WARRANTY COVERAGE AT A GLANCE
1 ** Click HERE to see SUPPLEMENT **

TOWING COVERAGEIf your vehicle is inoperative due to the failure of a
warranted part, during any of the New Vehicle
Limited Warranties, including Emission and Seat-
belt warranties, towing service to the nearest au-
thorized Nissan dealership is covered.
ADJUSTMENT COVERAGE
Service adjustments not usually associated with the
replacement of parts, such as wheel alignment and
wheel balancing, are covered only during the first
12 months or 12,000 miles, whichever comes first.
● Limited 6 month warranty coverage:
OE wiper blade inserts are covered for the first six
months of ownership.
REFRIGERANT RECHARGE ONLY COVERAGE
Refrigerant recharge not associated with the repair
or replacement of a warranted part is covered only
during the first 12 months, regardless of the mileage.
NO CHARGE
Warranty repairs will be made at no charge for parts
and/or labor (except for tires, in which case you may pay
certain charges as noted above or as described in the
applicable tire warranty found later in this booklet) . Any
needed parts replacement will be made using Genuine
Nissan or Nissan approved new or remanufactured parts.
Nissan reserves the right to make changes at any time,
without notice, to production and service parts in their
specifications, colors, and materials, including those used
in connection with warranty repairs. For this reason, when
approved by Nissan and at Nissan’s discretion, function-
ally equivalent replacement parts may be used that do not
exactly match the original production part.
OBTAINING WARRANTY SERVICEYou must take the vehicle to an authorized Nissan
dealer in the United States or Canada during regular
business hours at your expense in order to obtain
warranty service. The names and addresses of au-
thorized Nissan dealers are listed in telephone direc-
tories and in www.nissanusa.com.
If you require warranty service outside of the United
States (see terms under caption “APPLICABILITY”) ,
contact an authorized Nissan dealer in that country.
MAINTENANCE, DATA ACCESS, AND
RECORDS
As a condition of this warranty, you are responsible for
properly using, maintaining and caring for your vehicle
as outlined in your Owner’s Manual and your Nissan
Service & Maintenance Guide, and maintaining copies
of all maintenance records & receipts for review by
Nissan.
You are also required to provide consent to give Nissan
access to data stored on vehicle systems. Failure to do
so is likely to result in the denial of warranty coverage.
Evidence of the performance of the required mainte-
nance should be kept and presented as proof of such
maintenance in connection with related warranty re-
pairs. To assist you in maintaining appropriate records,
the maintenance log located in your Nissan Service &
Maintenance Guide can be used along with supporting
repair invoices, receipts and other such records.
WHAT IS NOT COVERED
GENERAL EXCLUSIONS
This warranty does not cover damage, failures or corro-
sion resulting from or caused by:
Failure to operate the vehicle in accordance with the
Owner’s Manual
Misuse, such as using the vehicle to towFailure of a component not covered by warrantyRacing and competitive drivingTheft, vandalism, fire, or flooding (including engine
water ingestion)
Accident, collision, being towedRepairs performed by anyone other than an autho-
rized Nissan dealer
Glass breakage, unless resulting from defects in
material or workmanship
Normal wear and tear, including dings, dents, chips,
or scratches
Damage caused by any automated or manually op-
erated car wash or by using a pressure washer
Note that complaints related to failure to comply with
proper use of the vehicle as described in the applicable
Owner’s Manual, or the vehicle’s lack of compliance
with local regulations or environmental requirements of
any country (other than the U.S. or Canada) are NOT
covered by this warranty.
(Continued on next page)
2016 NEW VEHICLE LIMITED WARRANTY 7

DAMAGE OR FAILURES DUE TO ALTERATION
OR MODIFICATION
This warranty does not cover damage, failures or corro-
sion resulting from or caused by:
Alteration, tampering, or improper repair.Installation of non-Nissan approved accessories or
components.
Improper installation of any Nissan approved after-
market accessory or component.
A vehicle whose odometer mileage has been al-
tered, or the odometer repaired or replaced and the
actual vehicle mileage cannot be correctly and read-
ily determined.
SALVAGE TITLE
This limited warranty does not apply to any vehicle, and
is rendered VOID if the vehicle is (or ever has been)
issued a “salvage” or similar title including, but not
limited to junk, scrap, rebuilt, or flood titles under any
state’s law; or has ever been determined to be a “total
loss” or equivalent by any insurance company, such as
by payment of a cash payment of claim in lieu of repairs
because of a determination that the cost of repairs
exceeded the actual cash value of the vehicle.
DAMAGE, FAILURES OR CORROSION FROM
ENVIRONMENTAL CONDITIONS
This warranty does not cover damage, failures or corro-
sion resulting from or caused by:
Stone chipping, chemical fallout (acid rain) , tree sap,
salt, hail, windstorm, lightning, flood or other environ-
mental conditions.
The items listed below are not covered under corro-
sion coverage (perforation from corrosion) .
Exhaust system components.Corrosion of outer trim parts, such as moldings.
However, corrosion of outer trim parts is war-
ranted for 12 months or 12,500 miles, whichever
comes first.
Corrosion other than perforation, such as cos-
metic or surface corrosion due to defects in ma-
terials or workmanship. This is covered under the
Basic Coverage of the New Vehicle Limited War-
ranty.
Special bodies or equipment not manufactured or
supplied by Nissan.
DAMAGE, FAILURES OR CORROSION DUE TO
LACK OF OR IMPROPER MAINTENANCE OR RE-
PAIRS
This warranty does not cover damage, failures or corro-
sion resulting from or caused by:
Lack of performance of proper maintenance ser-
vices as outlined in your Nissan Service & Mainte-
nance Guide.
Fuel, fluids, or lubricants that are contaminated or
that do not meet the specification as outlined in your
Owner’s Manual .
Use of parts not equivalent in quality or design to
parts supplied by Nissan. MAINTENANCE SERVICE EXPENSE
This warranty does not cover normal maintenance ser-
vices as specified in both your Owner’s Manual and
Nissan Service & Maintenance Guide such as cleaning
and polishing, wheel alignment, headlight aiming, re-
placement of filters, replacement of windshield wiper
inserts, lubricants, coolant, worn brake shoes, pads,
drums and rotors and worn clutch discs, for example.
SEAT BELTS, TIRES, DROP-IN BEDLINERS AND
EMISSION CONTROL SYSTEM
Seat belts, tires, drop-in bedliners and the emission
control system are not covered by this warranty, but are
covered by separate warranties.
NISSAN SPRAY-IN BEDLINERS
Nissan Spray-in Bedliners will be repaired to commer-
cially acceptable standards which may include minor
appearance differences from the original bedliner.
NOTE:
The following pages are separate warranties
which may apply to your Nissan, such as those
covering vehicle emissions, seat belts, and tires.
8
2016 NEW VEHICLE LIMITED WARRANTY

WHO IS THE WARRANTOR
Nissan1warrants all parts of your 2016 Nissan vehicle
seat belt system supplied by Nissan.
WHAT IS COVERED AND FOR HOW
LONG
This warranty covers any Nissan supplied seat belt or
related component, that fails to function properly during
normal use within ten (10) years of the date the vehicle
is delivered to the first retail buyer or put into service,
whichever is earlier. Warranty repairs are free of charge
for parts and labor.
OBTAINING WARRANTY SERVICE
You must take the vehicle to an authorized Nissan dealer
in the United States or Canada during regular business
hours at your expense in order to obtain warranty ser-
vice. The names and addresses of authorized Nissan
dealers are listed in telephone directories.
WHAT IS NOT COVEREDDamage or failure due to misuse, alteration, accident
or collision damage. (Proper use is outlined in your
Owner’s Manual) .
Color fading, spotting or other cosmetic items when
the belt is otherwise functioning properly.
Air bags and related electronic control systems
which are covered by the Powertrain warranty.
LIMITATION OF WARRANTIES AND OTHER
WARRANTY TERMS AND STATE LAW
RIGHTS
EXTRA EXPENSES - LIMITATIONS OF DAMAGES
This warranty does not cover incidental or
consequential damages such as loss of the
use of the vehicle, inconvenience or commer-
cial loss.
ANY IMPLIED WARRANTY OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR PUR-
POSE SHALL BE LIMITED TO THE DURATION
OF THIS WRITTEN WARRANTY.
Some states do not allow the exclusion or limitation
of incidental or consequential damages or limita-
tions on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state.
Nissan does not authorize any person to create for
it any other warranty, obligation or liability in con-
nection with this vehicle.
1 Nissan indicates Nissan North America, Inc., P.O. Box 685003, Franklin, TN 37068-5003, which distributes Nissan vehicles in the United States.
18 SEAT BELT LIMITED WARRANTY

curbing, impacts or partial bead unseating. Some fit-
ment causes for air loss are (1) incomplete bead seat-
ing, (2) bead tearing caused by a machine tool due to
insufficient lubrication or improper adjustment. Leaking
valve core or rubber valve components should be re-
placed when problems are detected and whenever tires
are replaced.
Always maintain inflation pressure at the level
recommended by the vehicle manufacturer as
shown on the vehicle placard, vehicle certifica-
tion label or in the vehicle owner’s manual:
Underinflation is the leading cause of tire failure and may
result in severe cracking, component separation or
“blowout.” It reduces tire load capacity, allows exces-
sive sidewall flexing and increases rolling resistance,
resulting in heat and mechanical damage. Maintaining
proper inflation pressure is the single most important
thing you can do to promote tire durability and maximize
tread life.
Overinflation increases stiffness, which may deteriorate
ride and generate unwanted vibration. Overinflation also
increases the chances of impact damage.
DON’T OVERLOAD YOUR VEHICLE
Check your vehicle owner’s manual to determine the
load limits. Overloading your vehicle places stress on
your tires and other critical vehicle components. Over-
loading a vehicle can cause poor handling or increased
fuel consumption and may cause tire failure. Overload-
ing your tires can result in severe cracking, component
separation or “blowout.”
Never fit your vehicle with new tires that have less load
capacity than shown on the vehicle tire placard andremember that optimum rim width is important for
proper tire load distribution and function. The maximum
load capacity stamped on the sidewalls of P-Metric &
European Metric tires is reduced by 10% when used on
a light truck, utility vehicle or trailer. Never fit P-Metric or
European Metric tires to light trucks that specify LT-type
replacement tires.
DON’T SPIN YOUR TIRES
EXCESSIVELY
Avoid excessive tire spinning when your vehicle is stuck
in snow, ice, mud or sand. The centrifugal forces gen-
erated by a free-spinning tire/wheel assembly may
cause sudden tire explosion, resulting in vehicle dam-
age and/or serious personal injury to you or a bystander.
Never exceed 35 mph/55 kph, as indicated on your
speedometer. Use a gentle backward and forward rock-
ing motion to free your vehicle for continued driving.
Never stand near or behind a tire spinning at high
speeds, for example, while attempting to push a vehicle
that is stuck or when an on-the-car spin balance ma-
chine is in use.
DO CHECK YOUR TIRES FOR WEAR
Always remove tires from service when they reach two
thirty-seconds of an inch (2/32) remaining tread depth.
All new tires have treadwear indicators which appear as
smooth banks in the tread grooves when they wear to
the two thirty-seconds of an inch (2/32) level. Many wet
weather accidents result from skidding on bald or nearly
bald tires. Excessively worn tires are also more suscep-
tible to penetrations.
DO CHECK YOUR TIRES FOR DAMAGE
Frequent (at least monthly) inspection of your tires for
signs of damage and their general condition is important
for safety. If you have any questions, have your tire
Dealer inspect them. Impacts, penetrations, cracks,
knots, bulges or air loss always require tire removal and
expert inspection. Never perform a temporary repair or
use an inner tube as a substitute for a proper repair.
Only qualified persons should repair tires.
PROPER TIRE REPAIR
NOTE: Goodyear does not warrant any inspection or
repair process. The repair is entirely the responsibility of
the repairer and should be made in accordance with
established Rubber Manufacturers Association (RMA)
procedures.
TIRE PRESSURE MONITORING
SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more informa-
tion on what to do if the tire pressure warning system
activates.
THE CONVENIENCE (TEMPORARY)
SPARE
The Convenience (Temporary) Spare is designed, built
and tested to the high engineering standards set by
North America’s leading car manufacturers and to
Goodyear’s own high standards of quality control. It is
designed to take up a minimum of storage space and, at
the same time, fulfill the function of a spare tire when
needed. The spare is kept in its storage space, fully
(Continued on next page)
28
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY

inflated at 60 psi. To be sure it is always ready for use,
the air pressure should be checked on a regular basis.
The Convenience (Temporary) Spare can be used in
combination with the original tires on your vehicle. You
can expect a tire tread life of up to 3,000 miles
(4,800 kilometers), depending on road conditions and
your driving habits. To conserve tire tread life, return the
spare to the storage area as soon as it is convenient to
have the standard tire repaired or replaced.
The Convenience (Temporary) Spare weighs less than a
standard tire so it’s easier to handle. It also helps reduce
the total car weight, which contributes to fuel economy.
The wheels used with the Convenience (Temporary)
Spare are specifically designed for use with high pres-
sure spares and should never be used with any other
type tire.
DON’T ATTEMPT TO MOUNT YOUR
OWN TIRES
Serious injury or death may result from explosion of
tire/rim assembly due to improper mounting proce-
dures. Follow tire manufacturer’s instructions and
match tire diameter to rim diameter. Mount light truck
radials on rims approved for radial service. Do not apply
bead sealer. This can inhibit bead seating. Lubricate
beads and tire rim (including tube or flap) contact
surfaces. Lock assembly on mounting machine or place
in safety cage. STAND BACK and never exceed 40 psi
to seat beads. Never use a volatile substance or a
rubber “donut” (also known as a bead expander or
“O-Ring”) to aid bead seating. Only specially trained
persons should mount tires.
DON’T MIX TIRES OF DIFFERENT
SIZES AND TYPES ON THE SAME
AXLE
For optimum handling and control, Goodyear recom-
mends fitment of four (4) tires of the same type and size
unless otherwise specified by the vehicle manufacturer.
WARNING: Before you replace your tires, always con-
sult the vehicle owner’s manual and follow the vehicle
manufacturer’s replacement tire recommendations. Ve-
hicle handling may be significantly affected by a change
in tire size or type. When selecting tires that are different
from the Original Equipment size, see a professional
installer in order to make certain that proper clearance,
load-carrying capacity and inflation pressure are se-
lected. Never exceed the maximum load capacity and
inflation pressure listed on the sidewall of the tire. Al-
ways drive safely and obey all traffic laws. Avoid sudden,
sharp turns or aggressive lane changes. Failure to fol-
low this warning may result in loss of control of the
vehicle, leading to an accident and serious injury or
death.
When replacing tires, you must maintain the outside
diameter and load-carrying capacity of the Original
Equipment tire. Inflation pressure may need to be ad-
justed to avoid overloading the tire. Consult the Tire &
Rim Association Load and Inflation Tables, ETRTO or
JATMA standards for correct load and inflation informa-
tion.
NEVER FIT TIRES TO A VEHICLE THAT
HAVE LESS LOAD CARRYING
CAPACITY THAN AS REQUIRED BY
THE ORIGINAL EQUIPMENT
MANUFACTURER
Examples: Many vehicles, such as large passenger
vans, require Load Range E tires as designated by the
vehicle manufacturer. Fitment of a tire, such as a Load
Range D, with less carrying capacity is not allowed.
NOTE: Goodyear-manufactured and/or marketed
European-Metric and P-Metric passenger tires are in-
terchangeable as long as they have the same section
width, same aspect ratio and same rim diameter.Cau-
tion: Never substitute a “Standard Load” (SL) tire
for an Extra Load (XL) orReinforced tire. If the
vehicle was originally equipped with “Extra
Load” (XL) or Reinforcedtires, replace those
tires with similar sized Extra Load(XL) orRe-
inforced tires.
FOLLOW THESE ADDITIONAL
GUIDELINES
When installing only two tires, fit the tires with the
deepest tread depth on the rear axle. If radials and
non-radials must be fitted to the same vehicle, fit radials
on rear axle. Never mix radials and non-radials on the
same axle. When fitting winter tires or all-season tires to
performance vehicles, always fit in sets of four. It is not
recommended to fit tires with different speed ratings. If
tires with different speed ratings are installed on a
vehicle, they should be installed with like pairs on the
same axle. The speed capability of the vehicle will
become limited to that of the lowest speed rated tires.
(Continued on next page)
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
29

RUN-FLAT TIRE FEATURE:
The Goodyear or Dunlop Run-Flat tire is a high-
performance tire with a remarkable feature: It can oper-
ate for limited distances with very low or even no infla-
tion pressure (refer to your Vehicle Owner’s Manual for
these limitations) . This is an important benefit, espe-
cially if inflation loss occurs at a location where imme-
diately stopping your vehicle could be hazardous.
TIRE PRESSURE MONITORING SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more informa-
tion on what to do if the tire pressure warning system
activates.
WARNING
If the tire pressure-monitoring system signals an alert,
follow these safety precautions to prevent a loss of
vehicle control that could result in serious personal
injury or death:
●Slow your speed. Do not exceed 50 mph (80 kph) .
●Avoid hard cornering, hard braking and severe han-
dling maneuvers.
●Avoid potholes and other road hazards.
Remember that when your tires have lost air pressure,
your vehicle’s handling capability is reduced, particu-
larly during severe maneuvers.
TO PROLONG TIRE LIFE DURING A SYSTEM ALERTThe Goodyear or Dunlop Run-Flat tire can be driven at
low or zero air pressure (refer to your vehicle Owner’s
Manual for these limitations) . To help prolong the life of
a tire operating under low-inflation conditions, drive at a
speed as far below 50 mph (80 kph) as possible. Also,
drive the shortest distance possible before obtaining
tire service. Taking these precautions will increase the
chance that your tire will be repairable. SERVICE AFTER A SYSTEM ALERT
To obtain service after operating under low-inflation
conditions, contact your Goodyear or Dunlop Run-Flat
service facility. Trained service personnel will inspect
your tires to determine if they are in need of repair or
replacement. To locate the nearest authorized Good-
year or Dunlop Run-Flat service facility, call 1-800-
GOODYEAR (1-800-466-3932) .
WARNING
Because of the unique characteristics of Run-Flat tires,
the wheels on which they are mounted and your vehi-
cle’s tire pressure-monitoring system, all tire service
work other than routine inflation maintenance and exter-
nal inspections must be performed by service personnel
at a Goodyear or Dunlop Run-Flat service facility. Do not
attempt to mount or demount Run-Flat tires yourself;
serious injury or death could result. Only specially
trained persons should mount, demount and repair Run-
Flat tires, and more than 40 psi (270 kPa) may be
required to seat beads. A safety cage and clip-on ex-
tension air hose must be used if more than 40 psi
(270kPa) is need to seat beads.
TIRE REPAIR
Like any other Goodyear or Dunlop speed-rated, high-
performance tire, the Goodyear or Dunlop Run-Flat tire
may be repaired to correct a puncture in the tread, but
PROPER MATERIALS AND PROCEDURES MUST BE
USED. Contact a Goodyear or Dunlop Run-Flat service
facility for information on proper repairs. For the location
of the nearest facility, call 1-800-GOODYEAR (1-800-
466-3932) .
WARNING
Goodyear and Dunlop Run-Flat tires are designed for
use only on certain original equipment wheels supplied
with a properly operating low tire pressure-monitoring
system. If applied to a vehicle without a properly oper-
ating low tire pressure-monitoring system, the tires may
fail when operated in an underinflated condition, result-
ing in loss of vehicle control and possible serious injury
or death. Application of these tires to a vehicle not
equipped with specified operational low tire pressure-
monitoring system constitutes improper and unsafe use
of this product.
FOR SERVICE ASSISTANCE OR INFORMATION,
FIRST CONTACT THE NEAREST GOODYEAR OR
DUNLOP RETAILER.
1. For assistance in locating the nearest Goodyear or Dunlop Retailer, look in the Yellow Pages under
Tire Dealers-New.
2. Go to www.goodyear.com for U.S. or www.good- year.ca for Canada. For Dunlop tires, go to www-
.dunloptires.com for U.S. & Canada.
If additional assistance is required, call the Customer
Assistance Center at 1-800-321-2136 for U.S. or
1-800-387-3288 for Canada.
Or write to:
Customer Assistance Center
Dept. 728
200 Innovation Way
Akron, OH 44316-0001
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY 31

H. Tire with weather cracking which was purchasedmore than four years prior to presentation for adjust-
ment.
●GENERAL EXCLUSIONS
I. No Hankook Tire employee, retailer or dealer has the authority to make any warranty, representation, prom-
ise or agreement on behalf of Hankook Tire except as
stated in this policy.
J. Tires used in racing related activities or competitive events are not covered by this warranty.
K. Limitation of remedy: to the extent permitted by law, HANKOOK disclaims liability for all consequential
and incidental damages. Some provinces and states
do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation
or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also
have the rights which vary from province to province
in Canada, and from state to state in the U.S.A.
3. HANKOOK’S OBLIGATIONS
Replacement qualifying under this warranty will be
made by a participating Hankook Dealer or a participat-
ing Car Dealer.
4. OWNER’S OBLIGATIONS
A. You must present the tire to a participating Hankook Dealer or a participating Car Dealer.
B. For free replacement, a proof of purchase date such as car dealer invoice should be presented. C. No claim will be recognized unless submitted on a
Hankook claim form completely filled out and signed
by the owner or a participating Hankook Dealer or
Car Dealer.
WARNING FOR YOUR SAFETY
●TIRE DEMOUNTING AND MOUNTING
Improper tire mounting and inflation procedures may
cause tire beads to break with explosive force during
installation of the tire on the rim, causing personal
injury and property damage. Follow the Rubber
Manufacturers Association installation and safety
procedure for mounting and inflating tires. Tire and
rim must match in size. Rim parts must match by
manufacturer’s design. Clean rim. Lubricate rim and
beads. Do not exceed the maximum recommended
pressure to seat beads on rim. Use remote control
inflation equipment and inflation cage.
NOTE:
Never inflate over 40 psi to seat beads. Mount
radial ply tires only on rims designated by wheel
manufacturer as suitable for radial tire. Only spe-
cially trained persons shall mount tires.
●AIR PRESSURE
Check the pressure in your tires, including your
spare, at least monthly, and always before and during
extended driving. Check tires cold (at least 3 hours
after the vehicle has been stopped and before it is
driven more than 1.6 kilometers or 1 mile) . Do not
reduce pressure when tires are hot, use an accurate
air pressure gauge to check pressure and maintain it
at the level recommended on the vehicle tire placard
or in the Owner’s Manual. Underinflation produces
extreme flexing of sidewalls and builds up heat to the
point that premature tire failure may occur. Overin-
flation can cause the tires to be more susceptible to
impact damage. Cold tire pressures, however,
should never be higher than the limit molded on the
sidewall.
●LOAD LIMITS
Never exceed the load-carrying limits molded onto
the sidewall of your tires or the maximum vehicle load
limit as shown on the vehicle tire placard, whichever
is less. Overloading builds up excessive heat in the
tire and leads to early and/or sudden failure.
●HAZARDS
Avoid running over objects (e.g., chuckholes, rocks,
curbs, metal, glass, etc.) which may possibly cause
internal tire damage. Continued use of a tire that has
suffered internal damage (which may not be exter-
nally visible) can lead to dangerous tire failure. De-
termination of suspected internal damage requires
demounting the tire from its rim and examination by
trained tire personnel.
(Continued on next page)
36 HANKOOK TIRE LIMITED WARRANTY

J. No Mileage Warranty for Original tires.
●GENERAL EXCLUSIONS
K. No Kumho Tire employee, retailer or dealer has the authority to make any warranty, representation,
promise or agreement on behalf of Kumho Tire ex-
cept as stated in this policy.
L. Tires used in racing related activities or competitive events are not covered by this warranty.
M. Limitation of remedy: to the extent permitted by law, Kumho disclaims liability for all consequential and
incidental damages. Some provinces and states do
not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives
you specific legal rights, and you may also have the
rights which vary from province to province in
Canada, and from state to state in the U.S.A.
3. KUMHO OBLIGATIONS
Replacement qualifying under this warranty will be
made by a participating Kumho Dealer or a participating
Car Dealer.
4. OWNER’S OBLIGATIONS
A. You must present the tire to a participating KumhoDealer or a participating Car Dealer.
B. For free replacement, a proof of purchase date such as car dealer invoice should be presented.
C. No claim will be recognized unless submitted on a Kumho claim form completely filled out and signed
by the owner or a participating Kumho Dealer or Car
Dealer.
WARNING FOR YOUR SAFETY
●TIRE DEMOUNTING AND MOUNTING
Improper tire mounting and inflation procedures may
cause tire beads to break with explosive force during
installation of the tire on the rim, causing personal
injury and property damage. Follow the Rubber
Manufacturers Association installation and safety
procedure for mounting and inflating tires. Tire and
rim must match in size. Rim parts must match by
manufacturer’s design. Clean rim. Lubricate rim and
beads. Do not exceed the maximum recommended
pressure to seat beads on rim. Use remote control
inflation equipment and inflation cage.
NOTE:
Never inflate over 40 psi to seat beads. Mount
radial ply tires only on rims designated by wheel
manufacturer as suitable for radial tire. Only spe-
cially trained persons shall mount tires.
●AIR PRESSURECheck the pressure in your tires, including your spare,
at least monthly, and always before and during ex-
tended driving, when tires cold (at least 3 hours after
the vehicle has been stopped and before it is driven
more than 1 mile / 1.6 kilometers) . Do not reduce
pressure when tires are hot, use an accurate air pres-
sure gauge to check pressure and maintain it at the
level recommended on the vehicle tire placard or in the
Owner’s Manual. Underinflation produces extreme
flexing of sidewalls and builds up heat to the point that
premature tire failure may occur. Overinflation can
cause the tires ‘to be more susceptible to impact
damage. Cold tire pressures,” however, should never
be higher than the limit molded on the sidewall.
●LOAD LIMITS
Never exceed the load-carrying limits molded onto
the sidewall of your tires or the maximum vehicle load
limit as shown on the vehicle tire placard, whichever
is less. Overloading builds up excessive heat in the
tire and leads to early and/or sudden failure.
●HAZARDS
Avoid running over objects (e.g., chuckholes, rocks,
curbs, metal, glass, etc.) which may possibly cause
internal tire damage. Continued use of a tire that has
suffered internal damage (which may not be exter-
nally visible) can lead to dangerous tire failure. De-
termination of suspected internal damage requires
demounting the tire from its rim and examination by
trained tire personnel.
●WORN TIRES
Never drive on worn tires. Tires should be replaced
by trained personnel when 2/32nds inch (1.6mm) of
remaining tread depth, as indicated by treadwear
indicators molded into the tread grooves. Use of
worn-out tires (less than 2/32nds of an inch remain-
ing tread depth) increases the probability of tire
failure. In most states, it is illegal to drive with less
than 2/32nds of an inch of remaining tread depth.
●SPEED LIMITS
Operating your vehicle in excess of lawful speed
limits or the maximum speeds justified by driving
conditions can be dangerous. Excessive speed cre-
ates heat buildup in a tire, leading to possible tire
failure.
(Continued on next page)
KUMHO TIRE LIMITED WARRANTY 39