phone NISSAN ALTIMA COUPE 2010 D32 / 4.G Navigation Manual

8. The system announces, “Dial or Change
Number?”. Speak “Dial”.9. The system makes a call to 800-662-6200.
INFO:
●Speaking “800-662-6200” (10 continuous
digits) or “662-6200” (7 continuous digits) is
acceptable, if the area code is not necessary.
However the 3-3-4 digit grouping is recom-
mended for improved recognition.
“How to speak numbers”
(page 9-5)
●The NISSAN voice recognition system is not
limited to recognizing phone numbers of only
7 or 10 digits. To dial a number in a format
other than the 3-3-4 digit grouping, use the
“International Call” command.●If “Change Number” is spoken during phone
number entry, the system will automatically re-
quest that the number be repeated using the
3-3-4 format. In this case please say the area
code first and then follow the prompts.
●Do not add a “1” in front of the area code
when speaking phone numbers.
●If the system does not recognize a voice
command, please try repeating the command
using a natural voice. Speaking too slowly or
too loudly may further decrease recognition
performance.
Example 3: Placing an international call to
the phone number 011-81-111-222-3333:
1. Press
located on the steering wheel
switch.
NGT0083NGT0084
2-34Getting started

2. The system announces, “Would you like to
access Phone, Navigation, Information, Au-
dio or Help?”.
3. Speak “Phone”.4. Speak “International Call”. 5. Speak “011811112223333”.
NGT0070NGT0079NGT0087
Getting started2-35

4 Setting a destination
Destination screen.................................4-2
Basic Operation................................4-2
Specifying the region . . .........................4-3
Specifying the city..............................4-4
Finding an address.............................4-5
Finding a place.................................4-7
Setting home location..........................4-15
Setting by address book.......................4-17
Setting a previous destination...................4-18Setting the previous start point..................4-20
Setting from stored routes......................4-21
Setting by phone number.......................4-23
Setting a freeway entrance/exit..................4-24
Setting an intersection.........................4-27
Setting a city center...........................4-29
Setting a point on the map......................4-32
Delete destination................................4-33

There are several methods available to set a
destination. Understand the advantages of each
method and select the best method for finding
and setting a preferred destination.
BASIC OPERATION
1. Press DEST.
2. Select the preferred destination setting
method.
Available setting items
●Street Address:
Searches for a destination by address.
●Places:
Searches for a destination from various cat-
egories of businesses or locations.
●Home:
Searches for a route from the current location
to the previously stored home destination.
●Address Book:
Searches for a destination from the list of the
stored locations.●Previous Destinations:
Searches for a destination from the previous
destinations.
●Delete Destination:
Deletes the currently set destination.
Available setting items (next page
screen)
●Previous Start Point:
Sets the previous starting point as the
destination.
●Stored Routes:
Selects a stored route.
●Phone Number:
Searches for a point of interest by a tele-
phone number.
INFO:
The system cannot be used to search for resi-
dential phone numbers.
●Freeway Entrance/Exit:
Searches for a destination from a freeway
entrance/exit.
NDE0001
DESTINATION SCREEN
4-2Setting a destination

SETTING BY PHONE NUMBER
If the telephone number of the facility is available,
use this to find the facility by entering the
number, and then have the system calculate a
route.
INFO:
●Telephone numbers that were stored for
stored destinations can also be used.
●If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.
●Only the locations included in the database in
the map data can be searched by the phone
number. Residential phone numbers cannot
be used to search for a location.1. Press DEST.
2. Select “Next Page”.3. Select “Phone Number”. The telephone
number input screen is displayed.
NDE0045NDE0051
Setting a destination4-23

4. Enter the telephone number including the
area code.
5. After finishing the entry, select “List”.
“NUMBER INPUT SCREEN”
(page 2-11)6. Displays a list screen if there are two or
more search results. Select the preferred
destination from the list.7. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
SETTING A FREEWAY
ENTRANCE/EXIT
The entrance or exit of a freeway can be set as
the destination to which the system calculates a
route.
NDE0052NDE0053NDE0054
4-24Setting a destination

3. Adjust the location by moving the cross
pointer across the map. The location of the
destination is modified.
INFO:
●The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
●The map scale can be changed by pressing
ZOOM IN or ZOOM OUT. The map scale can
also be changed by touching the scale icon.
●Even if the map screen is touched, the same
map screen as when “Move Location” is se-
lected is displayed.
STORING LOCATION
A searched location can be stored in the Ad-
dress Book. Then it can be easily retrieved and
set as a destination (or waypoint) .1. Set the destination using an appropriate
method.
2. Select “Store Location”.3. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
VIEWING INFORMATION ABOUT
SEARCHED LOCATION
Information (street address and phone number)
about places stored in the map data can be
displayed.
NRG0086NRG0087NRG0088
Route guidance5-7

3. Select the preferred item.
Available setting items
●“Edit”:
Edits the stored address information.
●“Move Location”:
Adjusts the location of the stored address.
●“Delete”:
Deletes the stored address.
●“OK”:
Applies the settings.
Other settings
A stored address can also be edited using the
following procedure.
1. Press DEST.
2. Select “Address Book”.
3. Select “Store/Edit”.
“4. Setting a destination”
MINOR ADJUSTMENT OF THE
HOME OR STORED ADDRESS
When “Edit” is selected, the following items of
the home or stored location can be edited.
●“Show Icon on Map”:
●“Name” (only for stored locations):
●“Voicetag” (only for stored locations):●“Icon”:
●“Sound”:
●“Direction”:
●“Distance”:
●“Phone No.”:
●“Group” (only for stored locations):
●“Entry Numbers” (only for stored locations):
Show Icon on Map
Displays the home icon or the stored address
icon on the map.
NST0027NST0028
Storing a location/route6-15

2. Select the preferred distance option. The
indicator of the selected distance
illuminates.
Available distance options:
●150 feet (50 m)
●300 feet (100 m)
●1000 feet (300 m)
●1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone No.
Stores the telephone number of the home or a
stored location.1. Select “Edit”.
2. Select “Phone No.”.
The telephone number entry screen is
displayed.3. Enter the telephone number of the home or
stored location.
“NUMBER INPUT SCREEN”
(page 2-11)
4. Select “OK”. The telephone number is
stored.
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations)
This groups the stored locations.
By grouping the stored locations, theBy Group
option of the sort function can be used more ef-
fectively in theSort Entriesmode.
NST0042NST0043NST0044
Storing a location/route6-21

The navigation system can be customized to
make it easier for you to use.
BASIC OPERATION
1. Press SETTING.
2. Select the preferred setting item.
Available setting items
●“Navigation”:
Adjust various settings of the navigation
system.
“Navigation setting” (page 8-7)
●“Audio”:
Refer to the vehicle Owner’s Manual.
●“Phone”:
Refer to the vehicle Owner’s Manual.
●“Bluetooth”:
Set BluetoothAudio and Phone. Refer to the
vehicle Owner’s Manual.●“Volume and Beeps”:
”Volume adjustment” (page 8-17)
●“Display”:
“Display settings” (page 8-3)
●“Clock”:
“Clock settings” (page 8-18)
●“Others”:
– “Comfort”:
This item is displayed when the ignition
switch is in the ON position.
Refer to the vehicle Owner’s Manual.
– “Language & Units”:
“Language & unit settings”
(page 8-19)
– “Voice Recognition”:
“System feedback announce-
ment modes” (page 9-27)
INFO:
The displayed items vary depending on the
equipped options.
NSE0001
SETTINGS SCREEN
8-2Other settings