audio NISSAN ALTIMA HYBRID 2009 L32A / 4.G Navigation Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2009, Model line: ALTIMA HYBRID, Model: NISSAN ALTIMA HYBRID 2009 L32A / 4.GPages: 238, PDF Size: 9.79 MB
Page 10 of 238
STEERING WHEEL SWITCH
1SOURCE :
Use to switch the audio mode (source) . For
additional information, see the Owner’s
Manual.
2ENTER :
Move up or down to highlight an item on the
screen, etc. Then press to select the high-
lighted item.
3:
Press this button during a setting operation to
return to the previous screen. In certain screens,
this button can also be used to apply the setting.
This button will only work when the “Back” key is
shown on the screen.
4–or+:
Use to adjust the volume. These buttons have
the same function as that of the volume knob. For
additional information, see the Owner’s Manual.
5:
Press to start the voice recognition mode. Press
and hold for 2 seconds to cancel voice com-
mands when in the voice recognition mode.
6:
Use to enable BluetoothHands-Free Phone.
For additional information, see the Owner’s
Manual.
LNV0423
Getting started2-3
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
06/11/08—tbrooks
Page 11 of 238
1. The navigation system starts when the igni-
tion switch is placed in the ACC or ON
position.2. As the start-up screen is displayed, read the
precautions carefully, and touch the “I
agree” key.
INFO:
If you do not touch the “I agree” key or push the
ENTER button on the steering wheel in less than
30 seconds while the precaution is on the
screen, the audio or off screen will be displayed.
Press the DEST, MAP, INFO, SETUP or
button to return to the start-up screen.
LNV0051LNV0052
START-UP SCREEN
2-4Getting started
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie
Page 178 of 238
●Audio:
Refer to the Owner’s Manual for your
vehicle.
●Navigation:
Allows you to adjust various settings of the
navigation system. Refer to the instructions
in the relevant sections.
DISPLAY SETTINGS
This menu allows you to turn on and off the dis-
play and adjust the image quality.
Basic operation
1. Touch the “Display” key.
2. Touch the preferred adjustment item.
3. After setting, touch the “Back” key to apply
the setting.
4. Touch the “Back” key to return to the previ-
ous screen. Press the MAP button to return
to the current location map screen.
Available setting items
●Display:
Allows you to turn on/off the screen.
●Brightness:
Allows you to adjust the screen brightness.
●Contrast:
Allows you to adjust the screen contrast.
Display
To turn off the display, touch the display “ON”
key.
The display can also be turned off by pressing
and holding the
button for more than 2
seconds.
When any button is pressed with the display off,
the display turns on. The display will automati-
cally turn off 5 seconds after the operation is
finished. To turn on the display, press the
button.
LNV0512
Other settings8-3
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
06/10/08—debbie
Page 192 of 238
2. A list of commands appears on the screen,
and the system announces, “Please say a
command”.
3. After the tone sounds and the
icon
on the screen changes from to gray to
orange, say “Command list”.4. The system confirms the recognized
command, and a list of navigation com-
mands appears.INFO:
●If the system did not recognize your
command, press the
button or the
“Back” key to return to the previous screen.
●Voice commands cannot be accepted when
the
icon is gray.
●If the command is not recognized, the system
announces, “Please say again”. Repeat the
command in a clear voice.
●Press the
button or the “Back” key
once to return to the previous screen.●If you want to cancel the command, press and
hold
button for approximately 2
seconds. The message “Voice input is can-
celled” will be announced.
●If you want to adjust the volume of the system
feedback, press the volume control buttons +
or – on the steering wheel switch or use the
audio system volume knob while the system is
making an announcement.
How to say numbers
NISSAN Voice Recognition requires a certain
way to say numbers in voice commands. Refer to
the following examples. (General rule: Either
“zero” or “oh” can be used for “0”.)
Navigation:
Say commands according to the following ex-
amples:
●2D map - “Two D map”
●Zoom level 5 - “Zoom level five”
WNV0552WNV0553
Voice recognition9-3
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie