headlights NISSAN CUBE 2013 3.G Quick Reference Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2013, Model line: CUBE, Model: NISSAN CUBE 2013 3.GPages: 20, PDF Size: 1.9 MB
Page 6 of 20

NISSaN INTeLLIGeNT KeY® SYSTeM (if so equipped)
The NISSAN Intelligent key® System allows you to lock or
unlock the vehicle, open the back door and start the engine.
NOTE: It is important to make sure the Intelligent
key is
with you (that is, in your poc
ket or purse).
The operating range of the Intelligent key is within
31.5 in (80 cm) from eac
h request switch.
To lock the vehicle, push either door handle request
switch 01 , push the back door request switch
02 ,
or press the
button
03 on the keyfob.
To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch 01 once
or
the back door request switch 02 once; the
corresponding door will unlock. Push the request
switch again within 1 minute; all other doors
will unlock, or
• Press the button
04 on the keyfob to unlock
th
e driver’s side door. Press the button again;
all other doors will unlock.
The Intelligent key can also be used to activate the
panic alarm by pressing and holding the button
05
for more than 1 second. Once activated, the panic
alarm and headlights will stay on for 25 seconds.
I
NTELLIGENT
kEY BATTE
RY DIS
cHARG
E
If the battery of the Intelligent key is discharged, or
environmental conditions interfere with the Intelligent
k
ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (ParK) position.
2. Firmly apply the foot brake.
3. Touc
h the ignition switch with the Intelligent
key
and a chime will sound.
4. Within 1
0 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” , the “Starting and driving (section
5)” and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
4
first drive features
01
02
03
04
05
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
1221378_13a_Cube_QRG_092112.indd 810/2/12 9:25 AM
Page 9 of 20

HeaDLIGHT CONTrOL SwITCH
HEADLIGHT
cONTR
OL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license plate and instrument panel lights. Turn the switc
h to the
position
02 to turn on the headlights.
A UTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is\
dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auTO position
03
th
en push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the
OFF,
01 or
position
02 .
HIGH BEAM SELE
cT
Push the headlight control switch forward
04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05 to flash the headlight high beams on and off.
7
MaNuaL TraNSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (Neutral) position .
Depress the clutch pedal to the floor.
Turn the ignition switch to start the engine.
T
URNING THE ENGINE OFF
Apply the foot brake and place the vehicle in first gear,
then apply the parking brake and turn the ignition
switch to
OFF.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
03
01
02
04
05
1221378_13a_Cube_QRG_092112.indd 1110/2/12 9:26 AM
Page 10 of 20

first drive features
8
wINDSHIeLD wIPe r aN D w aS Her SwIT CH
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) - One sweep operation of the
front
wipers.
02 Intermittent (INT) - Front wipers operate
intermittently. T
he intermittent operation
speed can be adjusted by twisting the time
control
ring
03 .
04 Low (LO) - Front wipers operate at a continuous
low
speed.
05 High (HI) - Front wipers operate at a continuous
high
speed.
06 Pull the lever toward you to activate the
front washer. T
he front wipers will operate
several
times.
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper
operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low
speed.
09 Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
04
05
MIST
OFF
INT
INT
LO
ON
HI
06
09
07
08
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
FOG LIGHT SWITcH (if so equipped)
NO TE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
03
1221378_13a_Cube_QRG_092112.indd 1610/2/12 9:26 AM