wheel NISSAN CUBE 2014 3.G Workshop Manual

NISSAN CUBE 2014 3.G Workshop Manual CUBE 2014 3.G NISSAN NISSAN https://www.carmanualsonline.info/img/5/362/w960_362-0.png NISSAN CUBE 2014 3.G Workshop Manual

Page 296 of 332

NISSAN CUBE 2014 3.G Workshop Manual SDI1575Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental charact

Page 298 of 332

NISSAN CUBE 2014 3.G Workshop Manual TYPES OF TIRES
WARNING
.When changing or replacing tires,
be sure all four tires are of the same
type (Example: Summer, All Season
or Snow) and construction. A
NISSAN dealer may be able to help
you wi

Page 299 of 332

NISSAN CUBE 2014 3.G Workshop Manual 8-36Maintenance and do-it-yourself
equipped tire size. Other types may damage
your vehicle. Use chain tensioners when re-
commended by the tire chain manufacturer to
ensure a tight fit. Loose end link

Page 300 of 332

NISSAN CUBE 2014 3.G Workshop Manual SDI1663
1.Wear indicator2.Wear indicator location mark
Tire wear and damage
WARNING
.Tires should be periodically in-
spected for wear, cracking, bul-
ging or objects caught in the
tread. If excessive

Page 301 of 332

NISSAN CUBE 2014 3.G Workshop Manual 8-38Maintenance and do-it-yourself
accident and personal injury.
. If the wheels are changed for any
reason, always replace with wheels
which have the same off-set dimen-
sion. Wheels of a different o

Page 302 of 332

NISSAN CUBE 2014 3.G Workshop Manual .With the TEMPORARY USE ONLY
spare tire installed do not drive your
vehicle at speeds faster than 50
MPH (80 km/h) .
. When driving on roads covered with
snow or ice, the TEMPORARY USE
ONLY spare tire

Page 304 of 332

NISSAN CUBE 2014 3.G Workshop Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants ................... 9-2Fuel recommendation ......................................................... 9-4
Engine oil and

Page 311 of 332

NISSAN CUBE 2014 3.G Workshop Manual 9-8Technical and consumer information
ENGINE
ModelMR18DE
Type Gasoline, 4-cycle, DOHC
Cylinder arrangement 4-cylinder, in-line
Bore 6Stroke in (mm)3.30763.193 (84.0 681.1)
Displacement cu in (cm
3) 10

Page 312 of 332

NISSAN CUBE 2014 3.G Workshop Manual DIMENSIONS AND WEIGHTS
Overall length in (mm) 156.7 (3,980)*1156.5 (3,975)*2
Overall width in (mm) 66.7 (1,695)
Overall height in (mm) 66.1 (1,680)
Front tread in (mm) 58.1 (1,475)
Rear tread in (mm)

Page 319 of 332

NISSAN CUBE 2014 3.G Workshop Manual 9-16Technical and consumer information
WARNING
.Properly secure all cargo with
ropes or straps to help prevent it
from sliding or shifting. Do not
place cargo higher than the
seatbacks. In a sudden st