NISSAN FRONTIER 2007 D22 / 1.G Navigation Manual

TURNING VOICE GUIDANCE ON/OFF
You can activate or deactivate voice guidance
and adjust the volume.
NAI0413
For Armada, Maxima, Murano, Pathfinder,
Quest, Titan
1. Push.
NAV3052
2. Highlight [Guidance Voice] and push
. The indicator illuminates if voice
guidance is activated.
SETTING THE VOICE GUIDANCE
Getting started2-35

NAI0411
For 350Z
1. Push.
NAV3047
2. Highlight [Guidance Settings] and push
.
NAV2743
3. Highlight [Guidance Voice] and push
. The indicator illuminates if voice
guidance is activated.
2-36Getting started

NAV3026
INFO:
You can also activate or deactivate voice
guidance using the following procedure.
1) Push.
2) Highlight [Volume and Beeps] and push
.
3) Highlight [Guidance Voice] and push
.
ADJUSTING VOICE GUIDANCE VO-
LUME
You can adjust the volume of voice guidance.
NAI0413
For Armada, Maxima, Murano, Pathfinder,
Quest, Titan
1. Push.
Getting started2-37

NAV3053
2. Highlight [Guidance Volume] and push
.
NAV3054
3. Adjust the voice guidance volume using the
joystick.
NAI0413
For 350Z
1. Push.
2-38Getting started

NAV2742
2. Highlight [Volume and Beeps] and push
.
NAV2744
3. Highlight [Guidance Volume] and push
.
NAV2745
4. Adjust the voice guidance volume using the
joystick.
Getting started2-39

MEMO
2-40Getting started

3 Map settings
Map types........................................................ 3-2
Plan view ..................................................... 3-2
Birdview
TM.................................................... 3-3
Switching the map view....................................... 3-4
Available views .............................................. 3-5
Moving a map................................................... 3-7
Plan view ..................................................... 3-7
Birdview
TM.................................................... 3-8
Returning to the current vehicle location.............. 3-9
Map scrolling information...............................3-10Changing the scale of a map..............................3-12
Map scale..................................................3-13
Other settings for the map screen........................3-15
Settings of heading/long range map view...........3-15
Changing the Birdview
TMangle.......................3-17
Changing the scale of the left screen................3-20
Map icons......................................................3-22
Displaying landmark icons..............................3-22
Map symbols...............................................3-24

Two types of map views are available: Plan View
and BirdviewTM.
PLAN VIEW
Plan View displays the map in a 2-dimensional
environment similar to a road map.
NAV2708
Screen information
&1Vehicle icon:
Indicates the current vehicle location and
the direction that you are traveling.
&2Guide point:
Indicates a guide point on the route.
&3GPS indicator:
Indicates the GPS reception condition of
signals from the satellites.
*Green: positioning is possible
*Gray: positioning is not possible
&4Remaining time and distance to the
destination:
Indicates the approximate remaining time
and distance to the destination. This indi-
cator will appear when you set the destina-
MAP TYPES
3-2Map settings

tion and start route guidance.
&5Suggested route:
Appears in bold yellow during route gui-
dance.
&6/Direction indicator:
Indicates the direction of the map.
&7Scale indicator:
Indicates the scale of the map.
&8Arrow:
Indicates the distance to the next guide
point and the turning direction at that guide
point.
NAV2746
BIRDVIEWTM
BirdviewTMdisplays the map from an elevated
perspective. In BirdviewTM, it is easy to recog-
nize an image of the route because it provides a
panoramic view over a long distance.
INFO:
About the Birdview
TMdisplay
.“BirdviewTM” is a registered trademark of
Xanavi Informatics Corporation.
.The map in Birdview
TMalways appears with
the current forward direction facing up.
Map settings3-3

The map view can be changed between Plan
View and BirdviewTM. The map can also be
displayed in the split screen mode.
NAV2711
1. Pushwhile the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push.
SWITCHING THE MAP VIEW
3-4Map settings