seat adjustment NISSAN FRONTIER 2016 D23 / 3.G Warranty Booklet

TOWING COVERAGEIf your vehicle is inoperative due to the failure of a
warranted part, during any of the New Vehicle
Limited Warranties, including Emission and Seat-
belt warranties, towing service to the nearest au-
thorized Nissan dealership is covered.
ADJUSTMENT COVERAGE
Service adjustments not usually associated with the
replacement of parts, such as wheel alignment and
wheel balancing, are covered only during the first
12 months or 12,000 miles, whichever comes first.
● Limited 6 month warranty coverage:
OE wiper blade inserts are covered for the first six
months of ownership.
REFRIGERANT RECHARGE ONLY COVERAGE
Refrigerant recharge not associated with the repair
or replacement of a warranted part is covered only
during the first 12 months, regardless of the mileage.
NO CHARGE
Warranty repairs will be made at no charge for parts
and/or labor (except for tires, in which case you may pay
certain charges as noted above or as described in the
applicable tire warranty found later in this booklet) . Any
needed parts replacement will be made using Genuine
Nissan or Nissan approved new or remanufactured parts.
Nissan reserves the right to make changes at any time,
without notice, to production and service parts in their
specifications, colors, and materials, including those used
in connection with warranty repairs. For this reason, when
approved by Nissan and at Nissan’s discretion, function-
ally equivalent replacement parts may be used that do not
exactly match the original production part.
OBTAINING WARRANTY SERVICEYou must take the vehicle to an authorized Nissan
dealer in the United States or Canada during regular
business hours at your expense in order to obtain
warranty service. The names and addresses of au-
thorized Nissan dealers are listed in telephone direc-
tories and in www.nissanusa.com.
If you require warranty service outside of the United
States (see terms under caption “APPLICABILITY”) ,
contact an authorized Nissan dealer in that country.
MAINTENANCE, DATA ACCESS, AND
RECORDS
As a condition of this warranty, you are responsible for
properly using, maintaining and caring for your vehicle
as outlined in your Owner’s Manual and your Nissan
Service & Maintenance Guide, and maintaining copies
of all maintenance records & receipts for review by
Nissan.
You are also required to provide consent to give Nissan
access to data stored on vehicle systems. Failure to do
so is likely to result in the denial of warranty coverage.
Evidence of the performance of the required mainte-
nance should be kept and presented as proof of such
maintenance in connection with related warranty re-
pairs. To assist you in maintaining appropriate records,
the maintenance log located in your Nissan Service &
Maintenance Guide can be used along with supporting
repair invoices, receipts and other such records.
WHAT IS NOT COVERED
GENERAL EXCLUSIONS
This warranty does not cover damage, failures or corro-
sion resulting from or caused by:
Failure to operate the vehicle in accordance with the
Owner’s Manual
Misuse, such as using the vehicle to towFailure of a component not covered by warrantyRacing and competitive drivingTheft, vandalism, fire, or flooding (including engine
water ingestion)
Accident, collision, being towedRepairs performed by anyone other than an autho-
rized Nissan dealer
Glass breakage, unless resulting from defects in
material or workmanship
Normal wear and tear, including dings, dents, chips,
or scratches
Damage caused by any automated or manually op-
erated car wash or by using a pressure washer
Note that complaints related to failure to comply with
proper use of the vehicle as described in the applicable
Owner’s Manual, or the vehicle’s lack of compliance
with local regulations or environmental requirements of
any country (other than the U.S. or Canada) are NOT
covered by this warranty.
(Continued on next page)
2016 NEW VEHICLE LIMITED WARRANTY 7

curbing, impacts or partial bead unseating. Some fit-
ment causes for air loss are (1) incomplete bead seat-
ing, (2) bead tearing caused by a machine tool due to
insufficient lubrication or improper adjustment. Leaking
valve core or rubber valve components should be re-
placed when problems are detected and whenever tires
are replaced.
Always maintain inflation pressure at the level
recommended by the vehicle manufacturer as
shown on the vehicle placard, vehicle certifica-
tion label or in the vehicle owner’s manual:
Underinflation is the leading cause of tire failure and may
result in severe cracking, component separation or
“blowout.” It reduces tire load capacity, allows exces-
sive sidewall flexing and increases rolling resistance,
resulting in heat and mechanical damage. Maintaining
proper inflation pressure is the single most important
thing you can do to promote tire durability and maximize
tread life.
Overinflation increases stiffness, which may deteriorate
ride and generate unwanted vibration. Overinflation also
increases the chances of impact damage.
DON’T OVERLOAD YOUR VEHICLE
Check your vehicle owner’s manual to determine the
load limits. Overloading your vehicle places stress on
your tires and other critical vehicle components. Over-
loading a vehicle can cause poor handling or increased
fuel consumption and may cause tire failure. Overload-
ing your tires can result in severe cracking, component
separation or “blowout.”
Never fit your vehicle with new tires that have less load
capacity than shown on the vehicle tire placard andremember that optimum rim width is important for
proper tire load distribution and function. The maximum
load capacity stamped on the sidewalls of P-Metric &
European Metric tires is reduced by 10% when used on
a light truck, utility vehicle or trailer. Never fit P-Metric or
European Metric tires to light trucks that specify LT-type
replacement tires.
DON’T SPIN YOUR TIRES
EXCESSIVELY
Avoid excessive tire spinning when your vehicle is stuck
in snow, ice, mud or sand. The centrifugal forces gen-
erated by a free-spinning tire/wheel assembly may
cause sudden tire explosion, resulting in vehicle dam-
age and/or serious personal injury to you or a bystander.
Never exceed 35 mph/55 kph, as indicated on your
speedometer. Use a gentle backward and forward rock-
ing motion to free your vehicle for continued driving.
Never stand near or behind a tire spinning at high
speeds, for example, while attempting to push a vehicle
that is stuck or when an on-the-car spin balance ma-
chine is in use.
DO CHECK YOUR TIRES FOR WEAR
Always remove tires from service when they reach two
thirty-seconds of an inch (2/32) remaining tread depth.
All new tires have treadwear indicators which appear as
smooth banks in the tread grooves when they wear to
the two thirty-seconds of an inch (2/32) level. Many wet
weather accidents result from skidding on bald or nearly
bald tires. Excessively worn tires are also more suscep-
tible to penetrations.
DO CHECK YOUR TIRES FOR DAMAGE
Frequent (at least monthly) inspection of your tires for
signs of damage and their general condition is important
for safety. If you have any questions, have your tire
Dealer inspect them. Impacts, penetrations, cracks,
knots, bulges or air loss always require tire removal and
expert inspection. Never perform a temporary repair or
use an inner tube as a substitute for a proper repair.
Only qualified persons should repair tires.
PROPER TIRE REPAIR
NOTE: Goodyear does not warrant any inspection or
repair process. The repair is entirely the responsibility of
the repairer and should be made in accordance with
established Rubber Manufacturers Association (RMA)
procedures.
TIRE PRESSURE MONITORING
SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more informa-
tion on what to do if the tire pressure warning system
activates.
THE CONVENIENCE (TEMPORARY)
SPARE
The Convenience (Temporary) Spare is designed, built
and tested to the high engineering standards set by
North America’s leading car manufacturers and to
Goodyear’s own high standards of quality control. It is
designed to take up a minimum of storage space and, at
the same time, fulfill the function of a spare tire when
needed. The spare is kept in its storage space, fully
(Continued on next page)
28
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY

CUMMINS DIESEL ENGINEThe Cummins Diesel Engine Limited warranty,
covers ONLY the following engine parts and com-
ponents:
cylinder block and all internal partscylinder head assembliescore plugsfuel injection pump & injectorsgaskets and seal for listed componentsintake and exhaust manifoldoil panoil pumptiming gear drive and / or chains and coverturbocharger housing and internal partsvalve coverswater pump and housingCORROSION COVERAGE (PERFORATION
FROM CORROSION)
Any body sheet metal panel supplied by Nissan
found to have developed perforation (rust-
through) due to corrosion in normal use is covered
for 60 months, regardless of mileage, subject to
the exclusions listed under the heading “WHAT IS
NOT COVERED”. No additional rust proofing ap-
plications are required. Perforation is a condition
in which any body sheet metal panel has corroded
from one surface through to another.
TOWING COVERAGE
If your vehicle is inoperative due to the failure of a
warranted part, during any of the New Vehicle
Limited Warranties, including Emission and Seat-
belt warranties, towing service to the nearest au-
thorized Nissan dealership is covered.
ADJUSTMENT COVERAGEService adjustments not usually associated with
the replacement of parts, such as wheel alignment
and wheel balancing, are covered only during the
first 12 months or 12,000 miles, whichever comes
first.
Limited 6 month warranty coverage:
OE wiper blade inserts are covered for the first six
months of ownership.
REFRIGERANT RECHARGE ONLY COVERAGE Refrigerant recharge not associated with the re-
pair or replacement of a warranted part is covered
only during the first 12 months, regardless of the
mileage.
2016 NEW VEHICLE LIMITED WARRANTY