start stop button NISSAN GT-R 2015 R35 Owners Manual

The alarm is activated by:
.Openin�f the door or the trunk lid �bithout
usin�f the button on the Intelli�fent Key, the
door handle request s�bitch or the mechan-
ical key. (Even if the door is opened by
releasin�f the door inside lock knob, the
alarm �bill activate.)
. Openin�f the hood.
How to stop an activated alarm
The alarm �bill stop by:
.Unlockin�f a door by pushin�f the UNLOCK
button on the Intelli�fent Key.
. Unlockin�f a door by pushin�f the door
handle request s�bitch.
. Pushin�f the i�fnition s�bitch to the ACC or
ON position.
If the system does not operate as de-
scribed above, have it checked by a GT-R
certified NISSAN dealer.
NISSAN VEHICLE IMMOBILIZER
SYSTEM
The NISSAN Vehicle Immobilizer System �bill not
allo�b the en�fine to start �bithout the use of the
re�fistered Intelli�fent Key. Never leave these
keys in the vehicle. FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
Note: Changes or modifications not ex-
pressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s) . Opera-
tion is subject to the following two condi-
tions: (1) this device may not cause
interference, and (2) this device must
accept any interference, including interfer-
ence that may cause undesired operation
of the device.
Security indicator light
The security indicator li�fht is located on the
instrument panel. It indicates the status of the
NISSAN Vehicle Immobilizer System.
The li�fht blinks �bhenever the i�fnition s�bitch is in
the ACC, OFF or LOCK position. This function
indicates the security systems equipped on the
vehicle are operational.
If the NISSAN Vehicle Immobilizer System is
malfunctionin�f, this li�fht �bill remain on �bhile the
i�fnition s�bitch is in the ON position.
If the light still remains on and/or the
engine will not start, see a GT-R certified
NISSAN dealer for NISSAN Vehicle Immo-
Instruments and controls2-47

5-10Starting and driving
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except
in an emergency. (The engine will stop
when the ignition switch is pushed
three consecutive times or the ignition
switch is pushed and held for more than
2 seconds.) If the engine stops while
the vehicle is being driven, this could
lead to a crash and serious injury.
Before operating the push-button ignition
s�fitch, be sure to mo�be the shift le�ber to the
&Pposition.OPERATING RANGE FOR ENGINE
START
The operating range for starting the engine
inside the �behicle is sho�fn in the illustration.
. If the Intelligent Key is on the instrument
panel, rear parcel shelf, inside the glo�be box,
door pocket, cup holders or console box, or
the corner of the passenger compartment, it
may not be possible to start the engine.
Carry the Intelligent-Key and try to start the
engine again.
. If the Intelligent Key is near the door or door
glass outside the �behicle, it may be possible
to start the engine.
IGNITION SWITCH OPERATION
When the Intelligent Key is carried �fith you and
the ignition s�fitch is pushed �fithout depressing
the brake pedal, the ignition s�fitch position �fill
change as follo�fs:
.Push center once to change to ACC.
. Push center t�fo times to change to ON.
. Push center three times to change to OFF.
(No position illuminates.)
. Push center four times to return to ACC.
. Open or close any door to return to LOCK
during the OFF position.
PUSH-BUTTON IGNITION SWITCH

Operating the shift lever
After starting the engine, fully depress the brake
pedal and �fove the shift lever fro�f the&P
position to the&R,&N, or&A
F&Mposition. �bush
the button to shift into the&Por&Rposition. All
other positions can be selected without pushing
the button.
Shift lever operation
�bush the button while depressing the
brake pedal.
�bush the button.
Just �fove the shift lever.
Auto�fatically returns.
&Pposition:
Use this position for parking and starting the
engine. The ignition switch will be changed to
the OFF or LOCK position.
CAUTION
Use the&Pposition only when the
vehicle is completely stopped.
&Rposition:
Use this position for driving in reverse. A chi�fe
will sound inside the vehicle and a warning will
appear in the vehicle infor�fation display if the
shift lever is in the
&Rposition for �fore than 5
�finutes, or when the driver’s door is opened
while the shift lever is in the
&Rposition.
&Nposition:
Neither forward nor reverse gear is engaged.
&A
F&Mposition:
Use this position for all nor�fal forward driving.
The shift lever can be �foved between
&Aand
&Mto alternately change each other. The
position indicator indicates the gear position
with the indication of “A” or “M”.
.
&Aposition: Use this position for ordinary
driving, with the gears shifted auto�fatically
fro�f first gear to sixth gear according to the
speed and driving conditions.
.
&Mposition: Operate the paddle shifter to
drive in first gear to sixth gear as desired.
. The position indicator blinks if it is not
possible to shift the gear.
(
“Trans�fission position indicator”
page 2-9)
Starting and driving5-17

.First gear:
Use this position when accelerating from a
stop�f climbing a steep hill slowly or engine
braking at low spee�bs.
. Secon�b gear:
Use this position when accelerating or
engine braking at mi�b-low spee�bs.
. Thir�b gear:
Use this position when accelerating or
gently engine braking at mi�b�ble spee�bs.
. Fourth gear:
Use this position when accelerating or
gently engine braking at mi�b-high spee�bs. .
Fifth gear:
Use this position for all normal forwar�b
�briving at highway spee�bs. Engine braking
is weaker in this position.
. Sixth gear:
Use this position for all normal forwar�b
�briving at highway spee�bs. Engine braking
is weakest in this position.
Suggested maximum speed in each gear:
Downshift to a lower gear if the engine is not
running smoothly�f or if you nee�b to accelerate.
Do not excee�b the maximum suggeste�b spee�b
(shown below) in any gear. For level roa�b
�briving�f use the highest gear suggeste�b for that
spee�b. Always observe poste�b spee�b limits�f an�b
�brive accor�bing to the roa�b con�bitions that will
ensure safe operation. Do not over-rev the
engine when shifting to a lower gear as it may
cause engine �bamage or loss of vehicle control.
Gear MPH (km/h)
1st 36 (58)
2n�b 63 (102)
3r�b 91 (148)
4th —
5th —
6th —
DRIVING TIPS
After starting the engine�f fully �bepress the foot
brake pe�bal an�b push the shift lever button
before shifting the shift lever from the
&Pposition
to the&R�f&N�f or&A
F&Mposition. Be sure the
vehicle is fully stoppe�b before attempting to shift
the shift lever.
The transmission is �besigne�b so that the foot
brake pe�bal must be �bepresse�b before shifting
from
&Pto any other position.
The shift lever cannot be move�b out of the
&P
position an�b into any other position with the
ignition switch other in the LOCK�f OFF or ACC
position.
When accelerating from a stop
Keep the foot brake pe�bal �bepresse�b an�b push
the shift lever button to shift into a �briving gear
as following:
. To �brive forwar�b�f move the shift lever to the
&A
F&Mposition.
. To back up�f move the shift lever to the
&R
position.
Starting on level ground or an uphill:
1. Check the shift lever position in�bicator on the instrument panel to confirm that the
�briving gear is selecte�b.
Starting and driving5-21