lights NISSAN JUKE 2015 F15 / 1.G Quick Reference Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2015, Model line: JUKE, Model: NISSAN JUKE 2015 F15 / 1.GPages: 28, PDF Size: 1.9 MB
Page 10 of 28

8
FIRST DRIVE FEATURES
NISSAN INTELLIGENT KEY® SYSTE M
The NISSAN Intelligent Key® System allows you to 
lock or unlock the vehicle, open your liftgate and start 
the engine. It is important to make sure the Intelligent 
Key is with you (that is, in your pocket or purse).
 
    The operating range of the Intelligent Key is within   
31.5 in (80 cm) from each request switch.
 
    To lock the vehicle, push either door handle request 
switch
 
1, push the liftgate request switch  2 or 
press the  
 button
 3 on the key fob.
 
    To unlock the vehicle, perform one of the   
following procedures:
    •  Push any door handle request switch 
1 once; 
 
the corresponding door will unlock. Push   
the request switch 
1  again within 1 minute; 
 
all other doors will unlock, or
    •  Press the
 
 button
 4 on the key fob to   
unlock the driver’s side door. Press the  
  
button 4 again; all other doors will unlock.
 
    The Intelligent Key can also be used to activate 
the panic alarm by pressing and holding the
 
 button
 5 for more than 1 second. Once 
activated, the panic alarm and headlights will stay 
on for a period of time.
INTELLIGENT KEY BATTERY DISCHARGE
 
    If the battery of the Intelligent Key is discharged   
or environmental conditions interfere with the   
Intelligent Key operation, start the engine   
according to the following procedure:
    1.  Move the shift lever to the P (PARK) position   
(Continuously Variable Transmission) or to the   
N (NEUTRAL) position (manual transmission).
    2. Firmly apply the foot brake.
    3.  Touch the ignition switch with the Intelligent 
Key, and a chime will sound.
    4.  Within 10 seconds after the chime sounds, 
push the ignition switch while depressing the 
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and 
adjustments (section 3)”, the  “Starting and driving (section 5)”   
and the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
1
3
4
5
2
1705381_15a_Juke_QRG_091814.indd   89/18/14   4:46 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 13 of 28

11
HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
 
   Turn the headlight control switch to the
   
position  1 to turn on the front parking, side 
 
marker, tail, license plate and instrument panel   
lights. Turn the switch to the  
 position
 2 to 
 
turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
 
     The autolight system will automatically turn the headlights on when it is\
 dark and off 
when it is light. The system will keep the headlights on for a period of time after you tur\
n 
the ignition off and all doors are closed.
 
    To activate the autolight system, turn the headlight control switch to the AUTO  position
 
3 then push the ignition switch to ON. To deactivate the autolight system, turn the 
headlight control switch to the OFF,   position
 1 or
  position
 2.
HIGH BEAM SELECT
 
    Push the headlight control switch forward
 4 to 
 
  select the high beam function. The blue indicator   
light 
 illuminates in the instrument panel. Pull   
the headlight switch back to the original position   
to select the low beam. The blue indicator light   
will extinguish.
 
    Pull and release the headlight control switch
 5 
to flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
 
    The headlights must be on and the low beams
  
selected for the fog lights to operate.
 
    Turn the switch (inside collar) to the  position
  
6  to turn the fog lights on.
 
    Turn the switch (inside collar)
 to the OFF position 
 
to turn the fog lights off.
LANE CHANGE SIGNAL
 
    Move the lever up or down until the turn signal begins to flash but th\
e lever does not 
latch to signal a lane change. Hold the lever until the lane change is completed.
 
    Move the lever up or down until the turn signal begins to flash but th\
e lever does not 
latch and release the lever. The turn signal will automatically flash 3 times. 
 
    Choose the appropriate method to signal a lane change based on the road and  
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
3
1
2
45
6
1705381_15a_Juke_QRG_091814.indd   119/18/14   4:46 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.