amp NISSAN LEAF 2016 1.G Dismantling Guide

5-2.2 Removal Procedure
NEVER disassemble or open the high voltage battery to avoid severe personal injury or
death
by electrical shock.
1. Discharge the high voltage battery. Refer to 3-1 Discharging Procedures (DG–13).
2.

Raise the vehicle and remove the high voltage battery under covers (front, center and rear) .
3. Remove the harness clamp (A) and disconnect the high voltage harness connector (B) from the high voltage
battery. Touching high voltage components without wearing
appropriate

Personal Protective Equipment (PPE) will
cause electrocution.
a. Use the following instructions to disconnect the high voltage harness connector. To prevent electrocution, cover battery side of high
voltage

connector with insulated tape. : Insulated tape A
B
AAYIA0165ZZ AAYIA0049GB
AAYIA0166ZZ
DG–41