key NISSAN MAXIMA 2003 A33 / 5.G Navigation Manual

3. Set distance for detour calculation.
The system will look for a detour according to
the distance set from the current location.
INFO:

If an alternative route cannot be found, the
previous route before calculation will be
displayed.

If the vehicle is traveling at high speed, the
suggested detour may start from the point
the vehicle has already passed.
TURNING OFF ROUTE
GUIDANCE TEMPORARIL Y
Y ou can turn off the route guide temporarily
when you do not need it.
1. Change to the current vehicle location
screen.
Keys will be displayed on the screen.
2. Select the
Cancel key .
The [CONFIRMA TION] screen will be dis-
played.3. Select the
Y es key .
INV0413INV0415
INV0416
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
9-5

The map screen will appear , and the suggested
route will disappear .
INFO:

Even when the route guidance is cancelled,
the routes which have been found are
stored.

T o restart route guidance, touch the
Voice key .
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
9-6

ABOUT VOICE GUIDANCE
WARNING
T o operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
BASICS OF VOICE GUIDANCE
The Voice Guidance will verbally tell you which
direction to turn when the vehicle approaches
the intersection in which you have to make a
turn to reach the destination.
NOTE:
The navigation system does not take
driving on “CAR POOL LANES” into con-
sideration for the guidance.
There may be some cases in which
the voice guidance and the actual
road conditions do not correspond.
This may occur because of discrep-
ancies between the actual road and
the information on the CD or due to
the vehicle’s speed.

In case the content of the voice guid-
ance does not match the actual road
conditions, follow the information
obtained from traffic signs or notices
on the road.
ADJUSTING THE GUIDE VOL-
UME
1. Change to the current vehicle location
screen.
2. Select the
Setting key .
3. When turning on/off the Voice Guidance,
touch the
Guide Volume key . When the
Guide Volume key is illuminated by the
green indicator , it is activated. When turn-
ing up/down the voice guidance, touch the
Louder orSofter key . The voice will
INV0417
HOW DO I USE THE VOICE GUIDANCE FEATURE?
10-2

REQUESTING CURRENT
VOICE INFORMA TION
This is available during route guidance, from
the time after the route calculation is completed
until the vehicle arrives at the destination.
1. T ouch the
Voice key .
The current condition will be announced.
INFO:

If you touch the
Voice key when you are
off the suggested route and when the au-tomatic re-route function is off, the voice
will announce: “Proceed to the highlighted
route.”

If you touch the
Voice key when you are
going in the wrong direction, the voice will
announce: “Please make a legal U-turn if
possible.”
NOTES ON THE VOICE
GUIDANCE

The voice guidance in this system should
be regarded as a supplementary function.
When driving your vehicle, check the route
on the map display and follow the actual
road and all traffic regulations.

The voice guidance is activated only for
junctions with certain conditions. In some
cases you may need to turn, even if there
is no voice guidance

The content of the voice guidance may vary ,
depending on the direction of the turn andthe type of junction with other roads.

The route guidance will be activated at vari-
ous times depending on the situation.

When the vehicle is off the suggested route,
route guidance is not available. The system
will not inform you of this; please refer to
the map display and request rerouting.

At freeway junctions, the road numbers and
directions may not accurately correspond
with the voice guidance.

At freeway exits, the street names may not
accurately correspond with the voice guid-
ance.

The displayed street names may sometimes
differ from the actual names or “UNKNOWN
STREET NAME” may be displayed.
Please refer to “Automatic rerouting” on page
9-2.

When the green indicator on the
Guide Volume key is not illuminated, the
INV0494
HOW DO I USE THE VOICE GUIDANCE FEATURE?
10-4

SCREEN INFORMA TION —
PLANVIEW DISPLA Y
Direction key:
This indicates and sets the direction of the map
on the display .
Please refer to “Changing the display direc-
tion” on page 11-6.
Map scale:
This display indicates the scale on the current
map.
V ehicle icon:
This icon indicates your vehicle and the direc-
tion of travel.
GPS indicator:
This will tell you the strength of the GPS signal
received.
Please refer to “Accuracy of positioning” on
page 2-2.
:
This will indicate the approximate distance of
route and traveling time to the destination. This
indicator will appear when you set the desti-
nation with the route guidance ON.
:
When the route guidance is OFF or when routecalculation is not started after you set the des-
tination, it will show the direction and approxi-
mate straight distance to the destination.
SCREEN INFORMA TION —
BIRD VIEWTMDISPLA Y
Map scale:
This display indicates the scale on the current
map.
By using the ZM− ZM+ buttons, you can
change the scale of the map.
INV0419
INV0422
HOW DO I ADJUST THE DISPLAY?
11-2

Every time theView key pressed, the dis-
plays will alternate between the BirdviewTMand
the Planview.INFO:
Some locations or buildings may be labeled
differently in Planview display and Birdview


display .
About Birdview
TMdisplay
The destination (waypoint) cannot be set in
Birdview
TMdisplay .
Set them in Planview display .

It always appears with the current forward
direction up.

When the system is re-drawing the display
in Birdview
TMdisplay , the distance the ve-
hicle travels becomes longer , and/or the
degree the vehicle turns becomes larger
than in the Planview display in order to
complete re-drawing.

The names of the roads and locations may
differ , depending on where the name appear
on the screen.
INV0421
INI0036
HOW DO I ADJUST THE DISPLAY?
11-4

CHANGING THE DISPLA Y
DIRECTION (IN PLANVIEW
DISPLA Y)
How to use the keys on the screen
Press the MAP button on the map screen to
display the
key .
Select the
Heading key (key) to alter-
nate the map displays between the North up
and the current forward direction up.
In case of
Settingkey
1. Change to the current vehicle location
screen.
2. Select the
Setting key .INV0495
INV0496INV0497
HOW DO I ADJUST THE DISPLAY?
11-6

3. Select theSystem Setting key on the
[SETTINGS] screen.4. Select theHeading key on the [SYSTEM
SETTINGS] screen.
The [HEADING] screen will be displayed.5. Select theHeading Up key or the
North Up key .
The map is displayed as follows:
Heading Up : The map shows the current
forward direction up.
North Up : The map shows North up.
INFO:

When the key is selected, the green indi-
cator light will light up.

When the Map button is pressed after the
INV0259INV0433INV0434
HOW DO I ADJUST THE DISPLAY?
11-7

display setting, the [CURRENT LOCA TION]
screen will appear .
When the
Previous key is selected, the
previous screen will reappear .
SCROLLING THE MAP
Y ou can manually scroll the map to check the
places of your choice.
1. Operating the joystick.
The map scrolls to the same direction as the
joystick.INFO:
While the vehicle is traveling, a single opera-
tion will move a fixed amount of the screen.
2. Press the MAP button to go back and
show the current vehicle position.
INFO:
Y ou can also select the
Previous key to go
back.
DISPLA YING THE COM-
PLETE ROUTE TO THE DES-
TINA TION
Y ou can request to display the complete sug-
gested route to the destination.
1. T ouch the screen.
Keys will be displayed on the screen.
INV0435
INV0436
INV0437
HOW DO I ADJUST THE DISPLAY?
11-8

2. Select theRoute Info key .
3. Select the
Complete Route key .The complete suggested route to the destina-
tion will be displayed.
DISPLA YING TURN LIST
Y ou can display the list of guide points to the
destination during route calculation.
1. T ouch the screen.
INV0438INV0439
INV0437
HOW DO I ADJUST THE DISPLAY?
11-9