air conditioning NISSAN MAXIMA 2003 A33 / 5.G Navigation Manual

Do not use the recirculation mode
for long periods as it may cause
the interior air to become stale
and the windows to fog up.

Positioning of the heater and air
conditioner controls should not be
done while driving in order that
full attention may be given to the
driving operation.
HOW TO USE THEAUTOBUT-
TON
This mode may be normally used all year round
as the system automatically works to keep a
constant temperature. Air flow distribution and
fan speed are also controlled automatically .
1. Press the AUTO button.
The automatic temperature control mode will
be displayed on the right.2. T urn the temperature set knob to set the de-
sired temperature.

Adjust the temperature set knob to about
75°F (24°C) for normal operation.

The temperature of the passenger compart-
ment will be maintained automatically . Air
flow distribution and fan speed are also
controlled automatically .
INFO:

T urn the knob to the right to raise the tem-
perature.
T urn the knob to the left to lower the tem-
perature.
3. T o stop the air conditioning, press the
OFF button.
CAUTION

If the engine is not running, air
conditioning and dehumidification
will not be activated.

When the key is in the ACC posi-
tion but the engine is not running,
air is available by pressing the
AUTObutton, but the cooling
function will not operate.
NOTE:

When the ambient temperature is
close to 32°F (0°C), the cooler and
dehumidification functions are not
available.
INV0500
HOW DO I OPERATE THE AUTOMATIC TEMPERATURE CONTROLS?
12-3

FAN SPEED CONTROL
Y ou can set the desired fan speed.
T ouch the
key to increase the fan
speed.
T ouch the
key to decrease the fan
speed.
INFO:
If you adjust the air outlet and fan speed,
the air conditioner will switch to
MANUAL control mode.
SETTING BACK TO AUTO-
MA TIC CONTROL
Press the AUTO button to set back to the au-
tomatic air conditioning from manual.
INV0503
HOW DO I OPERATE THE AUTOMATIC TEMPERATURE CONTROLS?
12-6