headlight aiming NISSAN MURANO 2007 1.G Quick Reference Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2007, Model line: MURANO, Model: NISSAN MURANO 2007 1.GPages: 14, PDF Size: 0.96 MB
Page 2 of 14
WINDSHIELD WIPER/WASHER SWITCH
TIRE PRESSURE MONITORING SYSTEM (TPMS)
HEADLIGHT
AND TURN
SIGNAL CONTROL
0102
03
*See your Owner’s Manual for more information.
CRUISE CONTROLSTEERING WHEEL SWITCHES FOR AUDIO CONTROL
HEADLIGHT AIMING CONTROL SWITCH
04
0506
CONTROL PANEL DISPLAY
STEERING WHEEL TILT ADJUSTMENT*HOOD RELEASE*
0708
09
AUDIO CONTROLS
10
04
05
07
06
01
11
03
12
10
09
02
08
CLIMATE CONTROLS
11
AWD LOCK SWITCH
12
Page 3 of 14
HEADLIGHT AIMING CONTROL SWITCH
(with Xenon headlamps, if so equipped)
Depending on the number of occupants in the vehicle and
the load it is carrying, the headlight axis may be higher
than desired. If the vehicle is traveling on a hilly road, the
headlights may directly hit the rearview mirror of the
vehicle ahead or the windshield of the oncoming vehicle.
The light axis can be lowered with the operation of the
switch.
The larger the number designated on the switch, the lower the axis.
When traveling without a heavy load or on a flat road, select position 0.
HEADLIGHT CONTROL AND TURN SIGNAL
CONTROL
HEADLIGHT SWITCH
Turn the headlight switch to the position to turn
on the front parking, tail, license plate and instrument
panel lights.
Turn the headlight switch to the position to turn on
the headlights. All other lights remain on.
AUTOMATIC HEADLIGHT OPERATION (if so equipped)
The autolight system allows the headlights to be set so they turn on and off automatically.
The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights
automatically when it is dark.
Turn off all the lights when it is light.
Keep all the lights on for 45 seconds after you turn the key to OFF and all doors
are closed.
TO ACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the AUTO position, then turn the ignition switch to ON.
TO DEACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the OFF, or position.
FOG LIGHT OPERATION
NOTE: The headlights must be on and the low beams selected for the fog lights to operate.
Turn the switch to the position to turn on the fog lights.
Turn the switch to the OFF position to turn off the fog lights.