USB NISSAN MURANO HYBRID 2016 3.G Dismantling Guide

Center Console Assembly Exploded View
: Pawl
: Metal clip
: Clip
1.
Center console side
finisher (RH) 2. Center console side
finisher (LH)3. Center console lower side
finisher (LH)
4. Center console rear brace 5. Instrument stay (LH) 6. Center console upper side
finisher (LH)
7. Console power socket 8. Center console bin 9. Instrument stay (RH)
10. Center console lid 11. Rear center ventilator duct 12. 2nd row heated seat switch
(LH) (if equipped)
13. Rear USB interface 14. Center console rear finisher 15. 2nd row heated seat switch
(RH) (if equipped)
16. Rear ventilator grille assembly 17. Center console tray 18. Center console tray mat
19. Shift selector finisher 20. Center console assembly 21. Push-button ignition switch
22. Front heated seat switch (LH) 23.
Front heated seat switch (RH)24. Front power socket
25. Center console upper side
finisher (RH) 26. Center console lower side
finisher (RH) 1
26
2
3
5
7
86
10
19
11
12
13
9
1415 16174 22
21 2325
20
18
24
AAYIA0469ZZ
DG–41

20. Disconnect the remaining harness connectors and remove center console.
21.
Remove the high-voltage battery.
Use the following steps and refer to the 6-2.1 Exploded Views (DG–40).
a.

Release front USB interface and AUX in jack
harness retainer clips, then position harness
(A) aside. : Clip
b.

Remove nuts (A)and bolts (B)then remove CVT
shift selector bracket.
c. Remove DC/DC converter cover (1).Check that the 12-volt battery negative
terminal

is disconnected before removing the 12-volt
battery positive terminal.
d. Remove 12-volt battery positive terminal (2).
(3): DC/DC converter : Vehicle front A
AAYIA0498ZZ
A
B A
B
AAYIA0499ZZ
1
2
3
AAYIA0500ZZ
DG–45