alarm NISSAN PATHFINDER 2006 R51 / 3.G Navigation Manual

NAV2958
SoundSets the tone of the arrival alarm that sounds
when the vehicle approaches the home or a
stored location.
1. Highlight [Sound] and push
.
A sound list is displayed.
NAV2959
2. Highlight the preferred alarm tone by scrol- ling the list using the joystick. Then push
.
The indicator of the selected alarm tone
illuminates. Sound list:
None
Chime
Melody
Sound
Dog
Cat
Wave
Church bell
Music box 1
Music box 2
Marimba
Trumpet
Horn
Scratch
6-20
Storing a location/route

NAV2960
DirectionSets the alarm to sound when approaching from
a specific direction.
1. Highlight [Direction] and push.
The home or stored location is displayed at
the center of the map.
NAV2961
2. Set the direction that sounds the alarm
using the joystick. Then push
.
The selected direction is set.
INFO:
After the direction is set, if you highlight
[Direction] and push once again,
a confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push .
The set direction is cancelled.
NAV2962
DistanceSets the alarm to sound when reaching a
specific distance to the home or stored location.
1. Highlight [Distance] and push
.
Storing a location/route
6-21

NAV2963
2. Highlight the preferred distance option andpush .
The indicator of the selected distance
illuminates.
Available distance options: . 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
NAI0421
INFO:
Once you set the direction and distance to
sound an alarm, the system will sound the alarm
when the vehicle icon passes a half circle outline
on the map, as shown in the figure.
Example: Set to 300 feet (100 m) distance,
upward direction
&1Stored location icon
&2Vehicle icon
&3Setting range
NAV2964
Phone No.Stores the telephone number of the home or a
stored location.
1. Highlight [Phone No.] and push
.
The telephone number entry screen is
displayed.
6-22
Storing a location/route