height NISSAN PATHFINDER 2013 R52 / 4.G Quick Reference Guide

first drive features
SECoND RoW SEATS
To slide the seat forward or backward, pull the center
of the bar
01 up and hold it while you slide the seat
forward or backward to the desired position. Release
the bar to lock the seat in position.
To recline the seatback, pull up on the seatback release lever
02 and lean back. To bring the seatback
forward, pull the lever up and lean your body forward,
Release the lever to lock the seatback in position.
c

HILD SEAT A
cc

ESS MODE
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row can be accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever 03.
MULTI-MODE
To enter the 3rd row from outside the vehicle, lift up on the seatback lever 03. This will
release the back of the seat and fold up the seat cushion.
Slide the entire seat forward for access to the rear seat.
To return the seat to a locked position, push the upper seatback rearward until the seatback and track are locked. Push the seat cushion down.
For more information, refer to the “Safety—seats, seat belts and supplemental restraint system (sect\
ion 1)” of your
Owner’s Manual.
02
03
FRo NT PoWE R SEAT ADJUSTMENTS
(if so equipped)
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To recline the seatback, push the switch 02 forward
or backward.
SEAT LIFTER
To raise or lower the front portion or height of the seat, push the front\
or back end of the switch
01 up or down
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch 03 .
For more information, refer to the “Safety—seats, seat belts and supplemental restraint system (sect\
ion 1)” of your
Owner’s Manual.
010203
8
01
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
1351506_13c_Pathfinder_QRG_013013.indd 81/31/13 9:10 AM