2
NEW SYSTEM FEATURES
AROUND VIEW® MONITOR SYSTEM
WITH CAMERA AIDED SONAR
(parking sensor) (if so equipped)
With the ignition switch in the ON position, the
Around View® Monitor is activated by pressing
the CAMERA button
1, located on the control
panel, or by moving the shift lever to the
R (REVERSE) position. The control panel
displays various views of the position of the vehicle.
When the shift lever is in the P (PARK),
N (NEUTRAL) or D (DRIVE) position and the
CAMERA button
1 is pressed, the front view
and bird’s-eye view screen is displayed.
When the CAMERA button 1 is pressed
again, the front view and front-side view
screen is displayed.
When the shift lever is in the R (REVERSE)
position, the rear view and bird’s-eye view screen
will be displayed.
When the CAMERA button 1 is pressed, the
rear view and front-side view screen will
be displayed.
The colored guide lines on the display screen
indicate vehicle width and approximate distances
to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m);
Green 7 ft (2 m) and 10 ft (3 m)
There are some areas where the system will not
show objects.
• When in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed
2.
• When in the bird’s-eye view, a tall object near the
seam of the camera viewing areas
3 will not
appear in the monitor.
The distance between objects viewed on the
Around View® Monitor System differs from the
actual distance.
Objects in the bird’s-eye view will appear further
than the actual distance.
1
REAR VIEW & BIRD’S-EYE VIEW
REAR VIEW & FRONT-SIDE VIEW
FRONT VIEW & BIRD’S-EYE VIEW
FRONT VIEW & FRONT-SIDE VIEW
1
2
2
3
1904703_15c_Pathfinder_QRG_031315.indd 23/13/15 12:51 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
