Engine harness NISSAN PATROL 2001 Electronic Repair Manual

Diagnostic Procedure
1 INSPECTION START
Do you have CONSULT-II?
Yes or No
YescGO TO 2.
NocGO TO 3.
2 CHECK COOLING FAN OPERATION
With CONSULT-II
1. Turn ignition switch ªONº.
2. Perform ªCOOLING FANº in ªACTIVE TESTº mode with CONSULT-II.
SEF646X
3. Make sure that cooling fan-1 operates.
OK or NG
OKcGO TO 12.
NGcGO TO 4.
3 CHECK COOLING FAN OPERATION
Without CONSULT-II
1. Turn ignition switch ªOFFº.
2. Disconnect engine coolant temperature sensor harness connector.
3. Connect 150Wresistor to engine coolant temperature sensor harness connector.
4. Restart engine and make sure that cooling fan operates.
MEC475B
OK or NG
OKcGO TO 12.
NGcGO TO 4.
DTC 0208 OVER HEAT
EC-2011

ELECTRICAL SYSTEM
SECTION
EL
When you read wiring diagrams:
+Read GI section, ªHOW TO READ WIRING DIAGRAMSº.
When you perform trouble diagnoses, read GI section, ªHOW TO FOLLOW FLOW
CHART IN TROUBLE DIAGNOSESº and ªHOW TO PERFORM EFFICIENT DIAGNOSIS
FOR AN ELECTRICAL INCIDENTº.
+Check for any service bulletins before servicing the vehicle.
MODIFICATION NOTICE:
+Wiring Diagram has been changed.
CONTENTS
PRECAUTIONS AND PREPARATION............... 2003
Supplemental Restraint System (SRS) ªAIR
BAGº and ªSEAT BELT PRE-TENSIONERº ... 2003
POWER SUPPLY ROUTING............................... 2004
Schematic ........................................................ 2004
POWER SUPPLY ROUTING/WAGON AND
HARDTOP MODELS........................................... 2005
Wiring Diagram Ð POWER Ð ........................ 2005
GROUND DISTRIBUTION/WAGON AND
HARDTOP MODELS........................................... 2014
Engine Room Harness/LHD Models................ 2014
Engine Control Harness/LHD Models.............. 2017
Main Harness/LHD Models .............................. 2018
Body Harness/LHD Models ............................. 2021
Body No. 2 Harness/LHD Models ................... 2023
Back Door and Rear Window Defogger
Harness/LHD Models ....................................... 2024
Engine Room Harness/RHD Models ............... 2025
Main Harness/RHD Models ............................. 2026
STARTING SYSTEM........................................... 2029
Wiring Diagram Ð START Ð/M/T Models...... 2029
Wiring Diagram Ð START Ð/A/T Models ...... 2030
Construction ..................................................... 2031
Service Data and Specifications (SDS) ........... 2032
CHARGING SYSTEM.......................................... 2033
Wiring Diagram Ð CHARGE Ð ...................... 2033
HEADLAMP/WAGON AND HARDTOP
MODELS Ð Conventional Type Ð................... 2034
Wiring Diagram Ð H/LAMP Ð ........................ 2034Bulb Replacement............................................ 2035
Aiming Adjustment ........................................... 2035
HEADLAMP/WAGON AND HARDTOP
MODELS Ð Headlamp Aiming Control Ð....... 2037
Wiring Diagram Ð H/AIM Ð ........................... 2037
HEADLAMP/WAGON AND HARDTOP
MODELS Ð Daytime Light System Ð............. 2039
Wiring Diagram Ð DTRL Ð ............................ 2039
PARKING, LICENSE AND TAIL
LAMPS/WAGON AND HARDTOP MODELS..... 2041
Wiring Diagram Ð TAIL/L Ð/Type A .............. 2041
Wiring Diagram Ð TAIL/L Ð/Type B .............. 2043
Wiring Diagram Ð TAIL/L Ð/Type C .............. 2045
BACK-UP LAMP/WAGON AND HARDTOP
MODELS.............................................................. 2047
Wiring Diagram Ð BACK/L Ð/LHD Models.... 2047
FRONT FOG LAMP/WAGON AND HARDTOP
MODELS.............................................................. 2048
Wiring Diagram Ð F/FOG Ð .......................... 2048
REAR FOG LAMP/WAGON AND HARDTOP
MODELS.............................................................. 2049
Wiring Diagram ÐR/FOGÐ ............................ 2049
TURN SIGNAL AND HAZARD WARNING
LAMPS/WAGON AND HARDTOP MODELS..... 2050
Wiring Diagram Ð TURN Ð/Type A ............... 2050
Wiring Diagram Ð TURN Ð/Type C............... 2052
ILLUMINATION/WAGON AND HARDTOP
MODELS.............................................................. 2054
Schematic ........................................................ 2054

EL

Wiring Diagram Ð ILL Ð ................................ 2055
METER AND GAUGES/WAGON AND
HARDTOP MODELS ........................................... 2062
Combination Meter........................................... 2062
Schematic ........................................................ 2063
Wiring Diagram Ð METER Ð ......................... 2064
COMPASS AND THERMOMETER ..................... 2066
Wiring Diagram Ð COMPAS Ð ...................... 2066
WARNING LAMPS/WAGON AND HARDTOP
MODELS .............................................................. 2067
Schematic ........................................................ 2067
Wiring Diagram/Ð WARN Ð........................... 2069
WARNING CHIME/WAGON AND HARDTOP
MODELS .............................................................. 2077
Electrical Components Inspection ................... 2077
REAR WIPER AND WASHER/WAGON AND
HARDTOP MODELS ........................................... 2078
System Description .......................................... 2078
Wiring Diagram Ð WIP/R Ð/LHD Models ...... 2079
Wiring Diagram Ð WIP/R Ð/RHD Models ..... 2081
HEADLAMP WIPER AND WASHER .................. 2083
Wiring Diagram Ð HLC Ð .............................. 2083
HORN ................................................................... 2084
Wiring Diagram Ð HORN Ð ........................... 2084
CIGARETTE LIGHTER/WAGON AND
HARDTOP MODELS ........................................... 2085
Wiring Diagram Ð CIGAR Ð .......................... 2085
WIPER DEICER/WAGON AND HARDTOP
MODELS .............................................................. 2086
Wiring Diagram Ð DEICER Ð ........................ 2086
REAR WINDOW DEFOGGER/WAGON AND
HARDTOP MODELS ........................................... 2087
Electrical Components Inspection ................... 2087
AUDIO/WAGON AND HARDTOP MODELS ...... 2088
Wiring Diagram Ð AUDIO Ð/LHD Models ..... 2088
Wiring Diagram Ð AUDIO Ð/RHD Models .... 2090
Wiring Diagram Ð CD/CHG Ð/LHD Wagon .. 2092
Wiring Diagram Ð CD/CHG Ð/LHD
Hardtop ............................................................ 2093 Wiring Diagram Ð CD/CHG Ð/RHD
Hardtop ............................................................ 2094
Wiring Diagram Ð REMOTE Ð ...................... 2095
Wiring Diagram Ð P/ANT Ð/LHD Models ...... 2096
Wiring Diagram Ð P/ANT Ð/RHD Models ..... 2097
POWER DOOR MIRROR/WAGON AND
HARDTOP MODELS ........................................... 2098
Wiring Diagram Ð MIRROR Ð/LHD Models .. 2098
Wiring Diagram Ð MIRROR Ð/RHD Models . 2099
NATS (Nissan Anti-Theft System)/ZD ENGINE
MODELS .............................................................. 2100
Wiring Diagram Ð NATS Ð ............................ 2100
Wiring Diagram Ð NATS Ð/LHD Models ....... 2101
Wiring Diagram Ð NATS Ð/RHD Models ...... 2102
LOCATION OF ELECTRICAL UNITS/WAGON
AND HARDTOP MODELS .................................. 2103
Engine Compartment ....................................... 2103
Passenger Compartment Ð LHD Models ....... 2104
HARNESS LAYOUT ............................................ 2106
How to Read Harness Layout ......................... 2106
HARNESS LAYOUT/WAGON AND HARDTOP
MODELS .............................................................. 2108
Main Harness/LHD Models .............................. 2108
Main Harness/RHD Models ............................. 2112
Engine Room Harness/LHD Models................ 2116
Body Harness/LHD Models ............................. 2120
Body Harness/RHD Models ............................. 2124
Body No. 2 Harness/LHD Models ................... 2128
Body No. 2 Harness/RHD Models ................... 2130
WIRING DIAGRAM CODES (CELL CODES) ..... 2132
Wiring Diagram Codes (Cell Codes) ............... 2132
EL-2002

Engine Room Harness/LHD Models
CEL210M
GROUND DISTRIBUTION/WAGON AND HARDTOP MODELS
EL-2014

CEL211M
GROUND DISTRIBUTION/WAGON AND HARDTOP MODELS
Engine Room Harness/LHD Models (Cont'd)
EL-2015

CEL212M
GROUND DISTRIBUTION/WAGON AND HARDTOP MODELS
Engine Room Harness/LHD Models (Cont'd)
EL-2016

Engine Control Harness/LHD Models
ZD ENGINE
CEL214M
GROUND DISTRIBUTION/WAGON AND HARDTOP MODELS
EL-2017

Engine Room Harness/RHD Models
CEL223M
GROUND DISTRIBUTION/WAGON AND HARDTOP MODELS
EL-2025

Bulb Replacement
The headlamp is a semi-sealed beam type which uses a replace-
able halogen bulb. The bulb can be replaced from the engine
compartment side without removing the headlamp body.
+Grasp only the plastic base when handling the bulb.
Never touch the glass envelope.
1. Disconnect the battery cable.
2. Turn the bulb retaining ring counterclockwise until it is free
from the headlamp reflector, and then remove it.
3. Disconnect the harness connector from the back side of the
bulb.
4. Remove the headlamp bulb carefully. Do not shake or rotate
the bulb when removing it.
5. Install in the reverse order of removal.
CAUTION:
Do not leave headlamp reflector without bulb for a long
period of time. Dust, moisture, smoke, etc. entering head-
lamp body may affect the performance of the headlamp.
Remove headlamp bulb from the headlamp reflector just
before a replacement bulb is installed.
Aiming Adjustment
When performing headlamp aiming adjustment, use an aiming
machine, aiming wall screen or headlamp tester. Aimers should
be in good repair, calibrated and operated in accordance with
respective operation manuals.
If any aimer is not available, aiming adjustment can be done as
follows:
For details, refer to the regulations in your own country.
a. Keep all tires inflated to correct pressures.
b. Place vehicle and tester on one and same flat surface.
c. See that there is no-load in vehicle (coolant, engine oil
filled up to correct level and full fuel tank) other than the
driver (or equivalent weight placed in driver's position).
CAUTION:
Be sure aiming switch is set to ª0º when performing aiming
adjustment on vehicles equipped with headlamp aiming
control.
SEL995K
SEL466V
HEADLAMP/WAGON AND HARDTOP MODELS Ð Conventional Type Ð
EL-2035

How to Read Harness Layout
Example:
G2E1B/6: ASCD ACTUATOR
Connector color / Cavity
Connector number
Grid reference
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
+Main Harness
+Engine Room Harness (Engine Compartment)
To use the grid reference
1)Find the desired connector number on the connector list.
2) Find the grid reference.
3) On the drawing, find the crossing of the grid reference letter column and number row.
4) Find the connector number in the crossing zone.
5) Follow the line (if used) to the connector.
CONNECTOR SYMBOL
Main symbols of connector (in Harness Layout) are indicated in the below.
Connector typeWater proof type Standard type
Male Female Male Female
+Cavity: Less than 4
+Relay connector
+Cavity: From 5 to 8
+Cavity: More than 9
ÐÐ
+Ground terminal etc.
Ð
HARNESS LAYOUT
EL-2106