Ref NISSAN PULSAR 2015 Service Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2015, Model line: PULSAR, Model: NISSAN PULSAR 2015Pages: 217, PDF Size: 5.22 MB
Page 158 of 217
> ( G L W 0 R G H O & $ @
2. Carefully putthespare tireonand tighten the
wheel nutswithyour fingers. Checkthatallthe
wheel nutscontact thewheel surface horizontally .
3. Tighten thewheel nutsalternately andevenly in
the sequence illustrated(
*
1
-
*
5
) , more than2
times withthewheel nutwrench, untilthey are
tight.
4. Lower thevehicle slowlyuntilthetire touches the
ground.
5. Tighten thewheel nutssecurely ,with thewheel
nut wrench, inthe sequence illustrated.
6. Lower thevehicle completely .
Tighten thewheel nutstothe specified torque
with atorque wrench assoon aspossible.
Wheel nuttightening torque:
108 N´m (11kg-m, 80ft-lb)
The wheel nutsmust bekept tightened to
specification atall times. Itis recommended
that thewheel nutsbetightened tospecification
at each lubrication interval.
WARNING:
Retighten thewheel nutswhen thevehicle has
been driven for1,000 km(600 miles) (alsoin
cases ofaflat tire, etc.).
ST OWING DAMAGED TIREANDTOOLS
GUID-1FAB B527-F376-4605-B0E 8-545A3C1B479F
WARNING:
Be sure thatthetire, jack andtools usedare
properly storedafteruse.Such items can
become dangerous projectilesinan accident or
sudden stop.
1. Securely storethejack, tools andthedamaged
tire inthe storage area.
2. Replace thecargo floorboard.
3. Close theback door.
GUID-CA 3FC571-40 A7-4E0F-A6D6-412F4AB 6C190
WARNING:
. Incorrect jumpstarting canlead toabattery
explosion. Thebattery explosion mayresult
in severe injuryordeath. Itmay also result in
damage tothe vehicle. Besure tofollow the
instructions inthis section.
. Explosive hydrogengasisalways present in
the vicinity ofthe battery. Keepallsparks
and flames awayfromthebattery.
. Always wearsuitable eyeprotection and
remove rings,bracelets, andanyother jew-
elry whenever workingonornear abattery.
. Never leanover thebattery whilejump
starting.
. Never allowbattery fluidtocome into
contact witheyes, skin,clothes orthe
vehicle's paintedsurfaces. Batteryfluidisa
corrosive sulfuricacidwhich cancause
severe burns.Ifthe fluid comes intocontact
with anything, immediately flushthecon-
tacted areawithplenty ofwater.
. Keep thebattery outofthe reach ofchildren.
. The booster batterymustberated at12
volts. Useofan incorrectly ratedbattery will
damage yourvehicle.
. Never attempt tojump startafrozen battery.
It could explode andcause serious injury.
In case ofemergency
6-5
JUMP
STARTING
& R Q G L W L R Q
Page 159 of 217
> ( G L W 0 R G H O & $ @
6-6
In case ofemergency
JVE0108X
1. Ifthe booster batteryisin another vehicle
*
B
,
position thetwo vehicles
*
A
and
*
B
to bring the
batteries intoclose proximity toeach other.
CAUTION:
If the battery ofvehicle
*
A
equipped withthe
Intelligent Keysystem isdischarged, theignition
switch cannot bemoved fromtheªLOCKº
position and,ifthe steering lockisengaged,
the steering wheelcannot bemoved. Connect
the jumper cablestothe booster vehicle
*
B
before turning theignition switchanddisenga-
ging thesteering lock.
2. Apply theparking brake.
3. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Place theignition switchinthe ªLOCKº position. 6.
Remove thevent caps, ifequipped, onthe battery .
7. Cover thebattery withafirmly wrung outmoist
cloth toreduce thehazard ofan explosion.
8. Connect thejumper cablesinthe sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
) .
CAUTION:
. Always connect positive +topositive +and
negative 7tobody ground, NOTto the
battery's negative7.
. Besure thatthejumper cablesdonot touch
moving partsinthe engine compartment.
. Besure thatthejumper cable's clamps do
not contact anyother metal.
9. Start theengine ofthe booster vehicle
*
B
and let
it run forafew minutes.
10. Depress theaccelerator pedalofthe booster
vehicle
*
B
at about 2,000 rpm.
11. Start theengine ofthe jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keepthestarter motorengaged formore
than 10seconds. Ifthe engine doesnotstart
right away, placetheignition switchinthe ªOFFº
position andwait atleast 10seconds before
trying again.
12. After theengine isstarted, carefully disconnect
the jumper cablesinthe opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
) .
13. Remove anddispose ofthe cloth asitmay be
contaminated withcorrosive acid.
14. Replace thevent caps, ifremoved.
& R Q G L W L R Q
Page 160 of 217
> ( G L W 0 R G H O & $ @
GUID-9D9 20AF3-899 E-4949-B9DE-B9DA38E BCD0D
Do not attempt tostart theengine bypushing the
vehicle.
CAUTION:
. Continuously Variable Transmission (CVT)/
Manual Transmission (MT)model cannot be
started bypushing. Attempting todo somay
cause damage tothe transmission.
. Three-way catalystequipped modelshould
not bestarted bypushing. Attempting todo
so may cause damage tothe catalyst.
. Never trytostart theengine bytowing.
When theengine starts,theforward surge
could cause thevehicle tocollide withthe
towing vehicle.
GUID-6FF3 F0CC-8B6E -46AC-926D-3 EB9C863FE4D
WARNING:
. Never continue drivingifyour vehicle over-
heats. Doingsocould cause avehicle fire.
. Never openthehood ifsteam iscoming out.
. Never remove theradiator orcoolant reser-
voir capwhile theengine ishot. Ifthe
radiator orcoolant reservoir capisremoved
when theengine ishot, pressurized hot
water willspurt outand possibly cause
burning, scalding orserious injury.
. Ifsteam orcoolant iscoming fromthe
engine, standclearofthe vehicle toprevent
getting burned.
. The engine cooling fanwill start atanytime
when thecoolant temperature exceedspre-
set degrees.
. Becareful nottoallow yourhands, hair,
jewelry orclothing tocome intocontact with,
or toget caught inthe cooling fanordrive
belts.
If your vehicle isoverheating (indicatedbythe high
temperature indicator),or ifyou feel alack ofengine
power, detectunusual noise,etc.,takethefollowing
steps:
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Apply theparking brake.
4. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
DO NOTST OP THE ENGINE . 5.
Open allthe windows.
6. Turn offthe airconditioner. Movethetemperature
control tomaximum hotand thefancontrol tohigh
speed.
7. Get outfrom thevehicle.
8. Visually inspectandlisten forsteam orcoolant
escaping fromtheradiator beforeopening the
hood. Wait until nosteam orcoolant canbeseen
before proceeding.
9. Open theengine hood.
10. Visually inspectifthe cooling fanisrunning.
11. Visually inspecttheradiator andradiator hosesfor
leakage.
If the cooling fanisnot running orthe coolant is
leaking, stoptheengine.
12. After theengine coolsdown, checkthecoolant
level inthe reservoir withtheengine running. Do
not open theradiator cap.
13. Add coolant tothe reservoir ifnecessary .
Have yourvehicle inspected/repaired ataNISSAN
dealer.
In case ofemergency
6-7
PUSH
STARTING IFYOUR VEHICLE OVERHEA TS
& R Q G L W L R Q
Page 161 of 217
> ( G L W 0 R G H O & $ @
6-8
In case ofemergency
GUID-697 40B53-3C7 A-41B9-8F95-F0E7FA4B4FAC
When towing yourvehicle, localregulations fortowing
must befollowed. Incorrecttowingequipment could
damage yourvehicle. To assure propertowing andto
prevent accidental damagetoyour vehicle, NISSAN
recommends thatyouhave professional roadassis-
tance personnel towyour vehicle. Itis advisable to
have theprofessional roadassistant carefullyreadthe
following precautions.
T OWING PRECAUTIONS
GUID-8DAF 4418-6E64-4D27-BC1 0-07511BA9 1A9C
. Besure thatthetransmission, steeringsystem,
and drivetrain areinworking condition before
towing. Ifany units aredamaged, thevehicle must
be towed usingadolly orflatbed towtruck.
. NISSAN recommends thatyour vehicle betowed
with thedriving (front)wheels offthe ground.
. Always attachsafetychains beforetowing.
T OWING RECOMMENDED BY NISSAN
GUID-9EF33 807-9D9B-401 1-8B78-623D89036CBF
T wo-Wheel Drive(2WD) models
GUID-364 6D4FA-EFB8- 4F09-A7F 3-9365176 91C4D
JVE0020X
NISSAN recommends thattowing dolliesbeused
under thefront wheels whentowing yourvehicle orthe
vehicle beplaced onaflatbed towtruck asillustrated.
Front wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
CAUTION:
Never towContinuously Variable Transmission
(CVT) model withthefront wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe drivetrain.
Manual Transmission (MT)model:
1. Place theignition switchinthe ªOFFº position.
2. Secure thesteering wheelinastraight ahead
position withrope orasimilar device.
3. Move theshift lever tothe ªNº (Neutral) position.
4. Release theparking brake.
5. Attach safetychains whenever towing. Rear
wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Place theignition switchtothe ªOFFº position.
2. Secure thesteering wheelinastraight-ahead
position withrope orasimilar device.
3. Move theshift lever tothe ªNº (Neutral) position.
4. Release theparking brake.
5. Attach safetychains whenever towing.
All four wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
CAUTION:
Never towCVT model withallfour wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe transmission.
Manual Transmission (MT)model:
1. Place theignition switchinthe ªOFFº position.
2. Move theshift lever tothe ªNº (Neutral) position.
3. Release theparking brake.
T OWING YOUR VEHICLE
& R Q G L W L R Q
Page 165 of 217
> ( G L W 0 R G H O & $ @
7-2
Appear anceandcare
GUID-7CB 8924B-F9C4-429D-ADB 0-BC9E02AD6934
In order tomaintain theappearance ofyour vehicle, itis
important totake proper careofit.
Whenever possible,parkyourvehicle insideagarage
or inacovered areatominimize thechances of
damaging thepaint surface ofyour vehicle.
When itis necessary topark outside, parkinashady
area orprotect thevehicle withabody cover. Be
careful nottoscratch thepaint surface when
putting onorremoving thebody cover.
W ASHING
GUID-9F6B8 26F-F269-47EF-A485-4 DEB2E726776
In the following instances, washyourvehicle assoon
as possible toprotect thepaint surface:
. After arainfall, whichmaycause thepaint surface
damage fromacidrain.
. After driving oncoastal roads,whichmaycause
rusting fromthesea breeze.
. When contaminants suchassoot, birddroppings,
tree sap, metal particles orbugs getonthe paint
surface.
. When dustormud builds uponthe paint surface.
1. Wash thevehicle surface withawet sponge and
plenty ofwater.
2. Clean thevehicle surface gentlyandthoroughly
using amild soap, aspecial vehiclesoapora
general purpose dishwashing liquidmixed with
clean, lukewarm (neverhot)water.
CAUTION:
. Donot wash thevehicle withstrong house-
hold soap, strong chemical detergents, ga-
soline orsolvents.
. Donot wash thevehicle indirect sunlight or
while thevehicle bodyishot, asthe paint
surface maybecome water-spotted. .
Avoid usingtight-napped orrough cloths,
such aswashing mitts.Caremust betaken
when removing caked-ondirtorother for-
eign substances sothe paint surface isnot
scratched ordamaged.
3. Rinse thevehicle thoroughly withplenty ofclean
water.
4. Use adampened chamoistodry the paint surface
and avoid leaving waterspots.
When washing thevehicle, takecare ofthe following:
. Inside flanges, jointsandfolds onthe doors,
hatches andhood areparticularly vulnerabletothe
effects ofroad salt.Therefore, theseareasmust
be cleaned regularly.
. Besure thatthedrain holes inthe lower edgeof
the doors arenot clogged.
. Spray watertothe underbody andinthe wheel
wells toloosen thedirt and/or washawayroad
salt.
REMOVING SPOTS
GUID-71 7DD9B1-5C 26-44D0-A76 C-3E699BC0B183
Remove tarand oilspots, industrial dust,insects, and
tree sapasquickly aspossible fromthepaint surface
to avoid lasting damage orstaining. Specialcleaning
products areavailable ataNISSAN dealerorany
automotive accessorystore.
W AXING
GUID-F E346184-0DE5 -4B3B-8AEC-E842874E9E91
Regular waxingprotects thepaint surface andhelps
maintain anew vehicle appearance.
After waxing, polishing isrecommended toremove
built-up residueandtoavoid aweathered appearance.
A NISSAN dealercanassist youinchoosing the
appropriate waxingproducts.
CAUTION:
. Wash yourvehicle thoroughly andcomple-
tely before applying waxtothe paint surface.
. Always followthemanufacturer's instruc-
tions supplied withthewax.
. Donot use awax containing anyabrasives,
cutting compounds orcleaners thatmay
damage thevehicle finish.
Machine compounding oraggressive polishingona
base coat/clear coatpaint finish maydullthefinish or
leave swirlmarks.
GLASS
GUID-F15B5 E23-8886-4DD3-AB87-3 9274A06846B
Use glass cleaner toremove smokeanddust filmfrom
the glass surfaces. Itis normal forglass tobecome
coated withafilm after thevehicle isparked inthe hot
sun. Glass cleaner andasoft cloth willeasily remove
this film.
CLEANING EXTERIOR
& R Q G L W L R Q
Page 167 of 217
> ( G L W 0 R G H O & $ @
7-4
Appear anceandcare
AIR FRESHENERS
GUID-491C 1655-FB80-4 2E5-B748-615749AEB 247
Most airfresheners useasolvent thatcould affect the
vehicle interior. Ifyou use anairfreshener, takethe
following precautions:
. Hanging-type airfresheners cancause permanent
discoloration whentheycontact vehicleinterior
surfaces. Placetheairfreshener inalocation that
allows itto hang freeandnotcontact aninterior
surface.
. Liquid-type airfresheners typicallycliponthe
vents. These products cancause immediate
damage anddiscoloration whenspilled oninterior
surfaces.
Carefully readandfollow themanufacturer's instruc-
tions before usingairfresheners.
FL OOR MATS
GUID-FE B53C0F-2B1 3-4DA5-9FFC -A4B230889197
The useofgenuine NISSAN floormats (ifequipped)
can extend thelifeofyour vehicle carpetandmake it
easier toclean theinterior. Regardless ofwhat mats
are used, besure theyarefitted foryour vehicle and
are properly positioned inthe foot well toprevent
interference withpedal operation. Matsshould be
maintained withregular cleaning andreplaced ifthey
become excessively worn.
Floor matpositioning aid(driver's side)
GUID-0F 3306F1-4A E6-4165-B1 83-646B6 719990D
JV A0010X
Example (LHDmodel)
This vehicle includes frontfloormatbrackets toact as
a floor matpositioning aid.NISSAN floormats have
been specially designed foryour vehicle model.
P osition themat byplacing thefloor matbracket hook
through thefloor matgrommet holewhile centering the
mat inthe foot area.
Periodically checkthatthemats areproperly posi-
tioned.
GLASS
GUID-47B68 639-6537-4853-8BB4-A5E527CF1 D3C
Use glass cleaner toremove smokeanddust filmfrom
the glass surfaces. Itis normal forglass tobecome
coated withafilm after thevehicle isparked inthe hot
sun. Glass cleaner andasoft cloth willeasily remove
this film.
CAUTION:
When cleaning theinside ofthe windows, donot
use sharp-edged tools,abrasive cleanersor
chlorine-based disinfectantcleaners.Theycould
damage theelectrical conductors, suchasrear
window defogger elements.
SEA TBEL TS
GUID-30 F2EF69-84CD -4146-8EDF-44903B81 C08C
WARNING:
. Donot allow wetseat belts toroll upinthe
retractor.
. Never usebleach, dyeorchemical solvents
to clean theseat belts, sincethese materials
may severely weakentheseat beltwebbing.
The seat belts canbecleaned bywiping themwitha
sponge dampened inamild soap solution.
Allow thebelts todry completely inthe shade before
using them. (SeeªSeat beltsº (P.1-7) .)
& R Q G L W L R Q
Page 171 of 217
> ( G L W 0 R G H O & $ @
8-2
Mainten anceanddo-it-yo urself
GUID-599 42846-716 6-4224-BF7F- 2B18FC065A82
Some day-to-day andregular maintenance isessential
to maintain yourvehicle's goodmechanical condition,
as well asitsemission andengine performance.
It is the owner's responsibility tomake surethatthe
specified maintenance, aswell asgeneral mainte-
nance, isperformed.
As the vehicle owner,youaretheonly onewho can
ensure thatyour vehicle receives theproper main-
tenance care.
SCHEDULED MAINTENANCE
GUID-81E 26708-DAB 3-41AE-A75 2-C19E294D F186
For your convenience, therequired scheduled main-
tenance itemsaredescribed andlisted inaseparate
maintenance booklet.You must refertothat booklet to
ensure thatnecessary maintenance isperformed on
your vehicle atregular intervals.
GENERAL MAINTENANCE
GUID-116 3C165-40B 6-4B3A-B9E 9-F57588E6E ADF
General maintenance includesthoseitemswhich
should bechecked duringnormal day-to-day operation
of the vehicle. Theyareessential ifyour vehicle isto
continue tooperate properly.It is your responsibility to
perform theseprocedures regularlyasprescribed.
Performing generalmaintenance checksrequires
minimal mechanical skilland afew general automotive
tools.
These checks orinspections canbedone byyourself,
a qualified technician, orifyou prefer, yourNISSAN
dealer.
WHERE TO GO FOR SERVICE
GUID-855385 4F-873D-40F5-B030-38E68B98CD BD
If maintenance serviceisrequired oryour vehicle
appears tomalfunction, havethesystems checked and
tuned byan authorised NISSANdealer.
GUID-41D 52985-13E F-4849-BE86 -06FE33BE5839
During normal day-to-day operationofthe vehicle,
general maintenance shouldbeperformed regularlyas
prescribed inthis section. Ifyou detect anyunusual
sounds, vibrations orsmells, besure tocheck forthe
cause orhave aNISSAN dealerdoitpromptly .In
addition, youshould notifyaNISSAN dealerifyou think
that repairs arerequired.
When performing anychecks ormaintenance work,
closely observe ªMaintenance precautionsº(P.8-4) .
EXPLANA TIONOFGENERAL MAINTE-
NANCE ITEMS
GUID-93ED 51D4-2178-43ED-8D01 -7CDF6194EAC9
Additional information onthe following items
with ª*ºisfound laterinthis section.
Outside vehicle
GUID-E260 8191-CBFF-4F8A-B24A- EDE685639B84
The maintenance itemslisted hereshould beper-
formed fromtimetotime, unless otherwise specified.
Doors andhood:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thatalldoors andthehood operate smoothly as
well asthe back door, trunklidand hatch. Alsomake
sure thatalllatches locksecurely .Lubricate if
necessary .Make surethatthesecondary latchkeeps
the hood fromopening whentheprimary latchis
released. Whendriving inareas usingroadsaltor
other corrosive materials, checklubrication frequently.
Lights*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Clean theheadlights onaregular basis.Makesurethat
the headlights, stoplights, taillights, turnsignal lights,
and other lights arealloperating properlyandinstalled
securely .Also check theaim ofthe headlights.
MAINTENAN CEREQUIREME NTS GENERALMAINTENANCE
& R Q G L W L R Q
Page 172 of 217
> ( G L W 0 R G H O & $ @
Tires*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thepressure withagauge oftenandalways
prior tolong distance trips.Adjust thepressure inall
tires, including thespare, tothe pressure specified.
Check carefully fordamage, cutsorexcessive wear.
Tire rotation*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
In the case thatTwo-Wheel Drive(2WD) andfront &
rear tires aresame size;Tires should berotated every
10,000 km(6,000 miles).Tires marked withdirectional
indicators canonly berotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatFour-Wheel Drive(4WD) andfront &
rear tires aresame size;Tires should berotated every
5,000 km(3,000 miles).Tires marked withdirectional
indicators canonly berotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatfront tiresaredifferent sizefrom rear
tires; Tirescannot berotated.
However, thetiming fortire rotation mayvaryaccording
to your driving habitsandtheroad surface conditions.
Tire Pressure Monitoring System(TPMS)trans-
mitter components (ifequipped) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Replace theTPMS transmitter grommetseal,valve
core andcap when thetires arereplaced duetowear
or age.
Wheel alignment andbalance:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
If the vehicle shouldpulltoeither sidewhile driving on
a straight andlevel road, orifyou detect uneven or
abnormal tirewear, theremaybeaneed forwheel
alignment. Ifthe steering wheelorseat vibrates at
normal highway speeds,wheelbalancing maybe needed.
Windshield:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Clean thewindshield onaregular basis.Check the
windshield atleast every sixmonths forcracks orother
damage. Repairasnecessary .
Wiper blades*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check forcracks orwear ifnot functioning correctly.
Inside vehicle
GUID-55 4469D2-12 96-4F49-B7A0 -0A8847FB7455
The maintenance itemslistedhereshould bechecked
on aregular basis,suchaswhen performing periodic
maintenance, cleaningthevehicle, etc.
Accelerator pedal:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thepedal forsmooth operation andmake sure
that thepedal doesnotcatch orrequire uneven effort.
K eep thefloor mats away fromthepedal.
Brake pedal*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thepedal forsmooth operation andmake sure
that itis the proper distance fromthefloor matwhen
depressed fully.Check thebrake booster function. Be
sure tokeep thefloor mats away fromthepedal.
Parking brake*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check theparking brakeoperation regularly.Check
that thelever (ifequipped) orthe pedal (ifequipped)
has theproper travel.Alsomake surethatthevehicle is
held securely onafairly steep hillwhen onlythe
parking brakeisapplied.
Seat belts:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thatallparts ofthe seat beltsystem (for
example, buckles,anchors, adjusters andretractors)
operate properly andsmoothly ,and areinstalled
securely .Check thebelt webbing forcuts, fraying,
wear ordamage. Steering
wheel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check forchanges inthe steering condition, suchas
excessive play,hard steering orstrange noises.
Warning lightsandchimes:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Make surethatallwarning lightsandchimes are
operating properly.
Windshield defogger:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thattheaircomes outofthe defogger outlets
properly andingood quantity whenoperating the
heater orair conditioner.
Windshield wiperandwasher*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Check thatthewipers andwasher operate properly
and that thewipers donot streak.
Under hoodandvehicle
GUID-E5D 10961-EA14 -4A37-B87E- 268783A0FC3 8
The maintenance itemslistedhereshould bechecked
periodically (forexample, eachtimeyoucheck the
engine oilorrefuel) .
Battery*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Except formaintenance freebattery ,check thefluid
level ineach cell.Itshould bebetween theªUPPERº
and ªLOWERº lines.Vehicles operated inhigh
temperatures orunder severe conditions require
frequent checksofthe battery fluidlevel.
Brake (andclutch) fluidlevel(s)*:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
For Manual Transmission (MT)model; makesurethat
the brake andclutch fluidlevels arebetween the
ªMAXº andªMINº linesonthe reservoirs.
Except forManual Transmission (MT)model; make
sure thatthebrake fluidlevel isbetween theªMAXº
and ªMINº linesonthe reservoir.
Maintenan ceand do-it-you rself
8-3
& R Q G L W L R Q
Page 176 of 217
> ( G L W 0 R G H O & $ @
HR16DE ENGINEMODEL
GUID-C9ABE EC8-90E9-4A9F-9977 -AA38DC1C1 F0A
JVC0364X
1. Brake andclutch* fluidreservoir
Ð Right-Hand Drive(RHD) models
2. Engine oilfiller cap
3. Brake andclutch* fluidreservoir
Ð Left-Hand Drive(LHD) models
4. Aircleaner
5. Battery
Ð Jump starting 6.
Window washerfluidreservoir
7. Engine drivebeltlocation
8. Engine oildipstick
9. Radiator cap
Ð Vehicle overheat
10. Engine coolant reservoir
11. Fuse/fusible linkholders
*: For Manual Transmission (MT)models
GUID-431 BB6E1-F915 -4C1F-8B9B-5A574742 5D98
WARNING:
. Never remove theradiator orcoolant reser-
voir capwhen theengine ishot. Serious
burns couldbecaused byhigh-pressure
fluid escaping fromtheradiator. Waituntil
the engine andradiator cooldown.
. Engine coolant ispoisonous andshould be
stored carefully inmarked containers outof
the reach ofchildren.
. Ifthe engine wasstopped soonwhen the
engine ishot, thecooling fanmay operate
for approximately 10minutes afterthe
engine wasstopped tocool thecomponents
in the engine compartment. Whenthecool-
ing fan isoperating, besure thathands or
other items donot getcaught init(for
MR16DDT engine).
The engine cooling systemisfilled atthe factory witha
high-quality ,year-round, anti-freezecoolantsolution.
The anti-freeze solutioncontains rustandcorrosion
inhibitors, thereforeadditional coolingsystemadditives
are not necessary .
CAUTION:
. Never useanycooling systemadditives such
as radiator sealer.Additives mayclog the
cooling systemandcause damage tothe
engine, transmission and/orcooling system.
. When adding orreplacing coolant,besure
to use only Genuine NISSANEngineCoolant
or equivalent inits quality withtheproper
mixture ratio.Examples ofthe mixture ratio
of coolant andwater areshown inthe
following table:
Maintenan ceand do-it-you rself
8-7
ENGINE
COOLING SY STEM
& R Q G L W L R Q
Page 178 of 217
> ( G L W 0 R G H O & $ @
GUID-B1 20ADA3-D0 3C-49B1-B529-7A274B D909D0
CHECKING ENGINEOILLEVEL
GUID-7F B3D707-0 60C-4B57-B BE7-3BDD80ACE30 5
SDI1993
T ype A
SDI2721
T ype B
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Remove thedipstick andwipe itclean. 6.
Reinsert thedipstick allthe way.
7. Remove thedipstick andcheck theoillevel. It
should bewithin therange
*
C
.
8. Ifthe oillevel isbelow
*
A
, remove theoilfiller cap
and pour therecommended oilinto theopening.
Do not overfill
*
B
.
When fillingtheengine oil,donot remove
the dipstick.
9. Recheck theoillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -in
period, depending onthe severity ofoperat-
ing conditions.
CAUTION:
The oillevel should bechecked regularly.
Operating yourvehicle withaninsufficient
amount ofoil can damage theengine, andsuch
damage isnot covered bythe warranty.
CHANGING ENGINEOILAND OILFILTER
GUID-BFC63 F3B-A179-42CF-BDF1-B 43386889AD1
WARNING:
. Used oilmust bedisposed ofproperly. Never
pour ordump oilinto theground, canals,
rivers, etc.It should bedisposed ofatproper
waste facilities. NISSANrecommends hav-
ing your oilchanged byaNISSAN dealer.
. Be careful nottoburn yourself, asthe
engine oilmay behot.
. Prolonged andrepeated contactwithused
engine oilmay cause skincancer.
. Avoid directskincontact withused oil.If
contacted, washthoroughly withsoap or hand
cleaner andplenty ofwater assoon as
possible.
. Store usedengine oilinmarked containers
out ofthe reach ofchildren.
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Raise andsupport thevehicle usingasuitable
floor jackandsafety jackstands.
.
Place thesafety jackstands underthevehicle
jack -up points.
.
A suitable adaptershouldbeattached tothe
jack stand saddle.
6. For HR16DE enginemodel,remove theplastic
engine undercover.
.
Remove thebolts andplastic clipsfromthe
undercover.
Maintenan ceand do-it-you rself
8-9
ENGINE
OIL
& R Q G L W L R Q