ECO mode NISSAN PULSAR 2020 Service Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2020, Model line: PULSAR, Model: NISSAN PULSAR 2020Pages: 217, PDF Size: 5.22 MB
Page 143 of 217
> ( G L W 0 R G H O & $ @
5-16
Starting anddriving
GUID-D9A2 662F-4922-4 5F1-98FB-77EC7CFF7 173
SSD0694
1. RESUME/ACCELERA TEswitch
2. SET/COAST switch
3. CANCEL switch
4. Cruise control MAINswitch
WARNING:
. Always observe theposted speedlimitsand
do not setthe speed overthem.
. Donot use thecruise control whendriving
under thefollowing conditions. Doingso
could cause aloss ofvehicle control and
result inan accident.
Ð When itis not possible tokeep the
vehicle ataconstant speed
Ð When driving inheavy traffic
Ð When driving intraffic thatvaries speed
Ð When driving inwindy areas
Ð When driving onwinding orhilly roads
Ð When driving onslippery (rain,snow, ice,
etc .)roads
CAUTION:
On manual Transmission (MT)model, donot
shift tothe ªNº (Neutral) positionwithout
depressing theclutch pedalwhenthecruise
control isoperated. Shouldthisoccur, depress
the clutch pedalandturn thecruise control MAIN
switch offimmediately. Failuretodo somay
cause engine damage.
PRECAUTIONS ONCRUISE CONTROL
GUID-F50E3 DC7-859C-46F8-BC38-59BFA63C6C9 0
. Ifthe cruise control system malfunctions, itwill
cancel automatically .The CRUISE indicator light
on the meter panelwillthen blink towarn the
driver.
. Ifthe engine coolant temperature becomes
excessively high,thecruise control system will
cancel automatically .
. Ifthe CRUISE indicator lightblinks, turnthecruise
control MAINswitch offand have thesystem
checked byaNISSAN dealer.
. The CRUISE indicator lightmayblink when the
cruise control MAINswitch isturned ONwhile
pushing theRESUME/ACCELERA TE,SET/
COAST orCANCEL switch.To properly setthe
cruise control system, perform thefollowing
procedures.
CRUISE CONTROL OPERATIONS
GUID-738 F3BB0-3C2E-4 375-95D7-54DD457F2 984
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
The cruise control willautomatically becanceled ifthe
vehicle slowsdownmorethanapproximately 13km/h
(8 MPH) below thesetspeed.
Moving theshift lever tothe ªNº (Neutral) position
(Continuously Variable Transmission model)ordepres-
sing theclutch pedal(Manual Transmission model)will
cancel thecruise control andtheCRUISE indicator
light willturn off.
T urning oncruise control
GUID-5EE 83BAE-9DA 6-4DFF-97D 2-23EA9F05 B504
Push thecruise control MAINswitch. TheCRUISE
indicator lightilluminates.
Setting cruising speed
GUID-A62E 93CF-7746-4F51-9653-7 4B5844CB6C7
1. Accelerate tothe desired speed.
2. Push theSET/COAST switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control.
CRUISE CONTROL (ifequippe d)
& R Q G L W L R Q
Page 144 of 217
> ( G L W 0 R G H O & $ @
Resetting toslower speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use anyone ofthe following methodstoreset toa
slower speed.
. Lightly tapthefoot brake pedal. When thevehicle
reaches thedesired speed,pushandrelease the
SET/COAST switch.
. Push andhold theSET/COAST switch.Whenthe
vehicle reaches thedesired speed,release the
SET/COAST switch.
. Quickly pushandrelease theSET/COAST switch.
This willreduce thevehicle speedbyabout 1km/h
(0.6 MPH) .
Resetting tofaster speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use anyone ofthe following methodstoreset toa
faster speed.
. Depress theaccelerator pedal.Whenthevehicle
reaches thedesired speed,pushandrelease the
SET/COAST switch.
. Push andhold theRESUME/ACCELERA TE
switch. Whenthevehicle reaches thedesired
speed, release theRESUME/ACCELERA TE
switch.
. Quickly pushandrelease theRESUME/ACCEL -
ERA TEswitch. Thiswillincrease thevehicle speed
by about 1km/h (0.6MPH) .
Resuming atpreset speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push andrelease theRESUME/ACCELERA TEswitch.
The vehicle willresume thelast setcruising speed
when thevehicle speedisover 40km/h (25MPH) .
Canceling cruisingspeed
GUID-DDC B3479-7AFA-43FE-8B66-1815 17721EEC
Use anyone ofthe following methodstocancel theset
speed.
. Push theCANCEL switch.
. Tap the foot brake pedal.
. Push thecruise control MAINswitch. TheCRUISE
indicator lightturns off.
GUID-63C 20373-823 7-4559-8ED 1-DFC76D027C63
WARNING:
. Do not stop orpark thevehicle over
flammable materialssuchasdry grass,
waste paperorrags. Theymayignite and
cause afire.
. Safe parking procedures requirethatboth
the parking brakebeapplied andtheshift
lever placed inthe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever placed inan appropriate
gear (Manual Transmission model).Failure
to do socould cause thevehicle tomove
unexpectedly orroll away andresult inan
accident.
. When parking thevehicle, makesurethe
shift lever ismoved tothe ªPº(Park)
position. Theshift lever cannot bemoved
out ofthe ªPº(Park) position without
depressing thefoot brake pedal(CVTmod-
el) .
. Never leavetheengine running whilethe
vehicle isunattended.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalillness topeople and
animals.
Starting anddriving
5-17
P
ARKING
& R Q G L W L R Q
Page 147 of 217
> ( G L W 0 R G H O & $ @
5-20
Starting anddriving
GUID-6A1 A5448-1FA0-4D3C-BDDB-09F4 5F69CF96
Y our vehicle wasdesigned tobe used tocarry
passengers andluggage. NISSANdoesnotrecom-
mend trailertowing, because itplaces additional loads
on your vehicle's engine,drivetrain, steering,braking
and other systems.
CAUTION:
V ehicle damage resulting fromtowing atrailer is
not covered bythe warranty.
GUID-1DB80 F9D-14AE-4FF9-AFC1-4C5BE29AA 1C4
Y our new vehicle wasdesigned tobe used primarily to
carry passengers andluggage.
T owing atrailer willplace additional loadsonyour
vehicle's engine,drivetrain, steering, brakingandother
systems. Thetowing ofatrailer willexaggerate other
conditions suchassway caused bycrosswinds, rough
road surfaces orpassing trucks.
Y our driving styleandspeed mustbeadjusted
according tothe circumstances. Beforetowing a
trailer, seeaNISSAN dealerforanexplanation about
the proper useoftowing equipment.
OPERA TINGPRECAUTIONS
GUID-665723 55-FE0D-46B5-83A5-7 64AA319902 2
. Avoid towing atrailer during thebreak -inperiod.
. Before driving, makesurethatthelighting system
of the trailer works properly .
. Observe thelegal maximum speedsfortrailer
operation.
. Avoid abrupt starts,accelerations andstops.
. Avoid sharpturnsandlane changes.
. Always driveyourvehicle atamoderate speed.
. Follow thetrailer manufacturer's instructions.
. Choose propercoupling devices(trailerhitch,
safety chain,roofcarrier, etc.)foryour vehicle and
trailer. Thesedevices areavailable fromaNISSAN
dealer whereyoucan also obtain moredetailed
information abouttrailertowing.
. Never allowthetotal trailer load(trailer weight plus
its cargo weight) toexceed themaximum setfor
the vehicle andthecoupling device.Seea
NISSAN dealerformore information.
. Thetrailer mustbeloaded sothat heavy goods are
placed overtheaxle. Themaximum allowable
vertical loadonthe trailer hitchmust notbe
exceeded. .
Have yourvehicle serviced moreoftenthanatthe
intervals specified inaseparate maintenance
booklet.
. Trailer towing requires morefuelthan under
normal circumstances becauseofaconsiderable
increase intraction powerandresistance.
While towing atrailer, checktheengine coolant
temperature indicatortoprevent thevehicle
from overheating.
MAXIMUM LOAD LIMITS
GUID-23EAC 0D5-39B8-4746-9FCB-78 845754E7 F5
CA0011-A
Maximum trailerloads(including tiresandother loaded
equipment):
1. Never allowthetotal trailer loadtoexceed:
.
The maximum 750kg(1,654 lb)for atrailer
without brakes.
.
For MRA8DE enginemodel,themaximum
1,200 kg(2,646 lb)for atrailer withbrakes.
.
For MR16DD Tengine model,themaximum
1,100 kg(2,426 lb)for atrailer withbrakes.
2. The total trailer loadmust belower thanthe
following threevalues evenifit does notexceed
the maximum permissible trailerloads.
TRAILER TOWING (exceptfor
Australia andNew Zealand) TRAILER
TOWING (forAustralia and
New Zealand)
& R Q G L W L R Q
Page 148 of 217
> ( G L W 0 R G H O & $ @
.
T owing capacity displayed onatow-bar.
.
T railer's grossvehicle massmarked ona
coupling body.
.
Gross vehicle massmarked onatrailer data
plate.
The maximum trailerloadwhich canbetowed byyour
vehicle depends onthe towing equipment fittedtothe
vehicle. Therefore, itis important tonot only have the
correct equipment fittedbutalso touse itcorrectly .
T owing loadsgreater thanthevalue specified foryour
vehicle orusing towing equipment whichisnot
provided byNISSAN couldseriously affectthe
handling and/orperformance ofyour vehicle.
V ehicle damage resulting fromimproper towing
procedures isnot covered byNISSAN warranties.
Information ontrailer towing andtherequired equip-
ment should beobtained fromaNISSAN dealer.
Maximum tongueload
GUID-EF F48735-E1F E-4FD3-96E5-C13950D 7C562
Never allowthetongue loadtoexceed 10%ofthe total
trailer load.Ifthe tongue loadexceeds 10%,rearrange
the cargo inthe trailer.
Maximum reargross axleweight
GUID-45 A2201E-2DAC -4DA0-BB41-B3AB6 8C3C4B 1
CA0050
The rear gross axleweight mustnotexceed theGross
Axle Weight Rating (GAWR) . GAWR
MRA8DEenginemodel MR16DDTenginemodel
CVT model MTmodel CVTmodel MTmodel
Front 905kg(1,996 lb)895kg(1,973 lb) 980kg(2,161 lb) 945kg(2,084 lb)
Rear 845kg(1,863 lb)845kg(1,863 lb) 850kg(1,874 lb) 855
kg(1,885 lb)
The trailer mustbeloaded sothat heavy goods areplaced overtheaxle.
TIRE PRESSURE
GUID-032 722AF-29C9 -46DD-844A-52324F174AA 3
When towing atrailer, inflatethevehicle tirestothe
maximum recommended COLDtirepressure (forfull
loading) indicated onthe tireplacard.
Do not tow atrailer whenthevehicle isinstalled witha
temporary sparetireoracompact sparetire.
SAFETY CHAINS
GUID-8F 59CA0B-F1 9F-4387-830 3-76CA6B75 F772
Always useasuitable chainbetween thevehicle and
trailer. Thechain should becrossed andshould be
attached tothe hitch, nottothe vehicle bumper oraxle.
Be sure toleave enough slackinthe chain topermit
turning corners.
TRAILER BRAKES
GUID-E9EA7 B1B-F3B1-4E20-AD37-C201099C7 483
Ensure thattrailer brakes areinstalled asrequired by
local regulations. Alsocheck thatallother trailer
equipment conformstolocal regulations.
Always blockthewheels onboth thevehicle andtrailer
when parking. Applythehand brake onthe trailer if
equipped. Parkingonasteep slopeisnot recom-
mended.
If parking onasteep slopeisunavoidable, placethe
shift lever inthe ªPº (Park) position (Continuously
V ariable Transmission model)orthe shift lever inan
appropriate gear(Manual Transmission model),and
turn thefront wheels towards thecurb.
TRAILER DETECTION (ifequipped)
GUID-6A3 DAB2C-3A6 0-4CD2-A465-DB6D8642D635
When towing atrailer withagenuine NISSAN towbar
electrical kitand theturn signal switch isused, the
electrical systemofthe vehicle willdetect the
additional electricalloadofthe trailer lighting. Asa
result, thedirection indicatortonewillbedifferent.
Starting anddriving
5-21
& R Q G L W L R Q
Page 149 of 217
> ( G L W 0 R G H O & $ @
5-22
Starting anddriving
GUID-EA B6A8C3- C092-41F6 -A582-7BF8 3E12921F
WARNING:
. Ifthe engine isnot running oristurned off
while driving, thepower assistforthe
steering willnotwork. Thesteering willbe
much harder tooperate.
. When theelectric powersteering warning
light illuminates withtheengine running, the
power assistforthe steering willcease
operation. You will still have control ofthe
vehicle butthesteering willbeharder to
operate.
The electric powersteering systemisdesigned to
provide powerassistwhiledriving tooperate the
steering wheelwithlight force.
When thesteering wheelisoperated repeatedly or
continuously whileparking ordriving atavery low
speed, thepower assistforthe steering wheelwillbe
reduced. Thisisto prevent overheating ofthe electric
power steering systemandprotect itfrom getting
damaged. Whilethepower assistisreduced, steering
wheel operation willbecome heavy.When the
temperature ofthe electric powersteering system
goes down, thepower assistlevelwillreturn tonormal.
Avoid repeating suchsteering wheeloperations that
could cause theelectric powersteering systemto
overheat.
Y ou may hear africative soundwhenthesteering
wheel isoperated quickly.However, thisisnot a
malfunction.
If the electric powersteering warninglight
illuminates whiletheengine isrunning, itmay indicate
the electric powersteering systemisnot functioning
properly andmay need servicing. Havetheelectric
power steering systemchecked byaNISSAN dealer.
(See ªElectric powersteering warninglightº(P.2-13) .)When
theelectric powersteering warninglight
illuminates withtheengine running, thepower assist
for the steering willcease operation. You will still have
control ofthe vehicle. However, greatersteering effort
is needed, especially insharp turnsandatlow speeds.
GUID-52 4F2163-875B -4D31-9A49-A2DA9D 150D31
The brake system hastwo separate hydraulic circuits.If
one circuit malfunctions, youwillstill have braking
ability attwo wheels.
BRAKE PRECAUTIONS
GUID-99 5F14BA-32 50-45E8-A4D 5-EFBD0B632895
V acuum assisted brakes
GUID-7AE 8E208-0576-4 BD2-8C93-C8FFF26A62C6
The brake booster aidsbraking byusing engine
vacuum. Ifthe engine stops,youcan stop thevehicle
by depressing thefoot brake pedal. However, greater
foot pressure onthe foot brake pedalwillberequired
to stop thevehicle. Thestopping distancewillbe
longer.
If the engine isnot running oristurned offwhile driving,
the power assisted brakeswillnot function. Braking
will beharder.
WARNING:
Do not coast withtheengine stopped.
For model withBrake Assist: Whenthebrake pedalis
depressed slowlyandfirmly ,you may hear aclicking
noise andfeelaslight pulsation. Thisisnormal and
indicates thattheBrake Assist System isoperating.
Using brakes
GUID-B3E 7B0F5-C532-4 3D1-8150-97FB7B385 CFC
Avoid resting yourfootonthe foot brake pedalwhile
driving. Thiswilloverheat thebrakes, wearoutthe
brake linings/pads faster,andincrease fuelconsump-
tion.
T o help reduce brakewearandtoprevent thebrakes
from overheating, reducespeedanddownshift toa
lower gearbefore goingdownaslope orlong grade.
Overheated brakesmayreduce braking performance
and could resultinloss ofvehicle control.
While driving onaslippery surface, becareful when
braking, accelerating ordownshifting. Abruptbraking
ELECTRIC POWERSTEERING
S Y STEM BRAKE
SY STEM
& R Q G L W L R Q
Page 152 of 217
> ( G L W 0 R G H O & $ @
BA TTER Y
GUID-C2C A590A-9BA8 -4FC1-9CCC-FDAEE005A29C
If the battery isnot fully charged duringextremely cold
weather conditions, thebattery fluidmayfreeze and
damage thebattery .To maintain maximum efficiency,
the battery shouldbechecked regularly.For details,
see ªBatteryº (P.8-18) .
ENGINE COOLANT
GUID-7A6B 0449-65CB-41B1-8B96-CE9ED7D4 46D2
If the vehicle isto be left outside withoutanti-freeze,
drain thecooling system, including theengine block.
Refill before operating thevehicle. Fordetails, see
ªChanging enginecoolantº (P.8-8) .
TIRE EQUIPMENT
GUID-64E9 A9C9-4E88-4008-996 7-F2592A02E8D2
1. Ifyou have snow tiresinstalled onthe front/rear
wheels ofyour vehicle, theyshould beofthe same
size, loading range,construction andtype (bias,
bias-belted orradial) asthe rear/front tires.
2. Ifthe vehicle isto be operated insevere winter
conditions, snowtiresshould beinstalled onall
four wheels.
3. Foradditional tractiononicy roads, studded tires
may beused. However, somecountries, provinces
and states prohibit theiruse.Check local,state
and provincial lawsbefore installing studdedtires.
Skid andtraction capabilities ofstudded
snow tires,onwet ordry surfaces, maybe
poorer thanthatofnon-studded snowtires.
4. Snow chains maybeused ifdesired. Makesure
they arethe proper sizeforthe tires onyour
vehicle andareinstalled according tothe chain
manufacturer's instructions.Usechain tensioners
when recommended bythe tire chain manufac-
turer toensure atight fit.Loose endlinks ofthe tire
chains mustbesecured orremoved toprevent the
possibility ofwhipping actiondamage tothe fenders
orunderbody .In addition, driveata
reduced speed,otherwise, yourvehicle maybe
damaged and/orvehicle handling andperfor-
mance maybeadversely affected.
SPECIAL WINTEREQUIPMENT
GUID-87 A06AD4-9E 97-40C3-AE6B-765ECE C9A0CA
It is recommended thatthefollowing itemsbecarried
in the vehicle duringthewinter:
. Ascraper andstiff-bristled brushtoremove ice
and snow fromthewindows.
. Asturdy ,flat board tobe placed underthejack to
give itfirm support.
. Ashovel todig thevehicle outofsnowdrifts.
P ARKING BRAKE
GUID-AA5 70ECB-5F9 D-4900-BD7B-65F841C1 AAD8
When parking inthe area where theoutside tempera-
ture isbelow 08C(328F) ,do not apply theparking
brake toprevent itfrom freezing. Forsafe parking:
. Place theshift lever inthe ªPº (Park) position
(Continuously Variable Transmission (CVT)mod-
el) .
. Place theshift lever inthe ª1º(1st) orªRº
(Reverse) position(Manual Transmission (MT)
model) .
. Securely blockthewheels.
CORROSION PROTECTION
GUID-605 EEE0A-D87 9-474B-9CA2 -428161302F6C
Chemicals usedforroad surface deicingareextremely
corrosive andwillaccelerate corrosionandthe
deterioration ofunderbody components suchasthe
exhaust system,fueland brake lines,brake cables,
floor panandfenders.
In the winter, theunderbody mustbecleaned
periodically. Foradditional information, see
ªCorrosion protectionº (P.7-5) .
For additional protection againstrustandcorrosion, which
mayberequired insome areas, consult a
NISSAN dealer.
Starting anddriving
5-25
& R Q G L W L R Q
Page 159 of 217
> ( G L W 0 R G H O & $ @
6-6
In case ofemergency
JVE0108X
1. Ifthe booster batteryisin another vehicle
*
B
,
position thetwo vehicles
*
A
and
*
B
to bring the
batteries intoclose proximity toeach other.
CAUTION:
If the battery ofvehicle
*
A
equipped withthe
Intelligent Keysystem isdischarged, theignition
switch cannot bemoved fromtheªLOCKº
position and,ifthe steering lockisengaged,
the steering wheelcannot bemoved. Connect
the jumper cablestothe booster vehicle
*
B
before turning theignition switchanddisenga-
ging thesteering lock.
2. Apply theparking brake.
3. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Place theignition switchinthe ªLOCKº position. 6.
Remove thevent caps, ifequipped, onthe battery .
7. Cover thebattery withafirmly wrung outmoist
cloth toreduce thehazard ofan explosion.
8. Connect thejumper cablesinthe sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
) .
CAUTION:
. Always connect positive +topositive +and
negative 7tobody ground, NOTto the
battery's negative7.
. Besure thatthejumper cablesdonot touch
moving partsinthe engine compartment.
. Besure thatthejumper cable's clamps do
not contact anyother metal.
9. Start theengine ofthe booster vehicle
*
B
and let
it run forafew minutes.
10. Depress theaccelerator pedalofthe booster
vehicle
*
B
at about 2,000 rpm.
11. Start theengine ofthe jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keepthestarter motorengaged formore
than 10seconds. Ifthe engine doesnotstart
right away, placetheignition switchinthe ªOFFº
position andwait atleast 10seconds before
trying again.
12. After theengine isstarted, carefully disconnect
the jumper cablesinthe opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
) .
13. Remove anddispose ofthe cloth asitmay be
contaminated withcorrosive acid.
14. Replace thevent caps, ifremoved.
& R Q G L W L R Q
Page 160 of 217
> ( G L W 0 R G H O & $ @
GUID-9D9 20AF3-899 E-4949-B9DE-B9DA38E BCD0D
Do not attempt tostart theengine bypushing the
vehicle.
CAUTION:
. Continuously Variable Transmission (CVT)/
Manual Transmission (MT)model cannot be
started bypushing. Attempting todo somay
cause damage tothe transmission.
. Three-way catalystequipped modelshould
not bestarted bypushing. Attempting todo
so may cause damage tothe catalyst.
. Never trytostart theengine bytowing.
When theengine starts,theforward surge
could cause thevehicle tocollide withthe
towing vehicle.
GUID-6FF3 F0CC-8B6E -46AC-926D-3 EB9C863FE4D
WARNING:
. Never continue drivingifyour vehicle over-
heats. Doingsocould cause avehicle fire.
. Never openthehood ifsteam iscoming out.
. Never remove theradiator orcoolant reser-
voir capwhile theengine ishot. Ifthe
radiator orcoolant reservoir capisremoved
when theengine ishot, pressurized hot
water willspurt outand possibly cause
burning, scalding orserious injury.
. Ifsteam orcoolant iscoming fromthe
engine, standclearofthe vehicle toprevent
getting burned.
. The engine cooling fanwill start atanytime
when thecoolant temperature exceedspre-
set degrees.
. Becareful nottoallow yourhands, hair,
jewelry orclothing tocome intocontact with,
or toget caught inthe cooling fanordrive
belts.
If your vehicle isoverheating (indicatedbythe high
temperature indicator),or ifyou feel alack ofengine
power, detectunusual noise,etc.,takethefollowing
steps:
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Apply theparking brake.
4. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
DO NOTST OP THE ENGINE . 5.
Open allthe windows.
6. Turn offthe airconditioner. Movethetemperature
control tomaximum hotand thefancontrol tohigh
speed.
7. Get outfrom thevehicle.
8. Visually inspectandlisten forsteam orcoolant
escaping fromtheradiator beforeopening the
hood. Wait until nosteam orcoolant canbeseen
before proceeding.
9. Open theengine hood.
10. Visually inspectifthe cooling fanisrunning.
11. Visually inspecttheradiator andradiator hosesfor
leakage.
If the cooling fanisnot running orthe coolant is
leaking, stoptheengine.
12. After theengine coolsdown, checkthecoolant
level inthe reservoir withtheengine running. Do
not open theradiator cap.
13. Add coolant tothe reservoir ifnecessary .
Have yourvehicle inspected/repaired ataNISSAN
dealer.
In case ofemergency
6-7
PUSH
STARTING IFYOUR VEHICLE OVERHEA TS
& R Q G L W L R Q
Page 161 of 217
> ( G L W 0 R G H O & $ @
6-8
In case ofemergency
GUID-697 40B53-3C7 A-41B9-8F95-F0E7FA4B4FAC
When towing yourvehicle, localregulations fortowing
must befollowed. Incorrecttowingequipment could
damage yourvehicle. To assure propertowing andto
prevent accidental damagetoyour vehicle, NISSAN
recommends thatyouhave professional roadassis-
tance personnel towyour vehicle. Itis advisable to
have theprofessional roadassistant carefullyreadthe
following precautions.
T OWING PRECAUTIONS
GUID-8DAF 4418-6E64-4D27-BC1 0-07511BA9 1A9C
. Besure thatthetransmission, steeringsystem,
and drivetrain areinworking condition before
towing. Ifany units aredamaged, thevehicle must
be towed usingadolly orflatbed towtruck.
. NISSAN recommends thatyour vehicle betowed
with thedriving (front)wheels offthe ground.
. Always attachsafetychains beforetowing.
T OWING RECOMMENDED BY NISSAN
GUID-9EF33 807-9D9B-401 1-8B78-623D89036CBF
T wo-Wheel Drive(2WD) models
GUID-364 6D4FA-EFB8- 4F09-A7F 3-9365176 91C4D
JVE0020X
NISSAN recommends thattowing dolliesbeused
under thefront wheels whentowing yourvehicle orthe
vehicle beplaced onaflatbed towtruck asillustrated.
Front wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
CAUTION:
Never towContinuously Variable Transmission
(CVT) model withthefront wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe drivetrain.
Manual Transmission (MT)model:
1. Place theignition switchinthe ªOFFº position.
2. Secure thesteering wheelinastraight ahead
position withrope orasimilar device.
3. Move theshift lever tothe ªNº (Neutral) position.
4. Release theparking brake.
5. Attach safetychains whenever towing. Rear
wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Place theignition switchtothe ªOFFº position.
2. Secure thesteering wheelinastraight-ahead
position withrope orasimilar device.
3. Move theshift lever tothe ªNº (Neutral) position.
4. Release theparking brake.
5. Attach safetychains whenever towing.
All four wheels onthe ground:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
CAUTION:
Never towCVT model withallfour wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe transmission.
Manual Transmission (MT)model:
1. Place theignition switchinthe ªOFFº position.
2. Move theshift lever tothe ªNº (Neutral) position.
3. Release theparking brake.
T OWING YOUR VEHICLE
& R Q G L W L R Q
Page 167 of 217
> ( G L W 0 R G H O & $ @
7-4
Appear anceandcare
AIR FRESHENERS
GUID-491C 1655-FB80-4 2E5-B748-615749AEB 247
Most airfresheners useasolvent thatcould affect the
vehicle interior. Ifyou use anairfreshener, takethe
following precautions:
. Hanging-type airfresheners cancause permanent
discoloration whentheycontact vehicleinterior
surfaces. Placetheairfreshener inalocation that
allows itto hang freeandnotcontact aninterior
surface.
. Liquid-type airfresheners typicallycliponthe
vents. These products cancause immediate
damage anddiscoloration whenspilled oninterior
surfaces.
Carefully readandfollow themanufacturer's instruc-
tions before usingairfresheners.
FL OOR MATS
GUID-FE B53C0F-2B1 3-4DA5-9FFC -A4B230889197
The useofgenuine NISSAN floormats (ifequipped)
can extend thelifeofyour vehicle carpetandmake it
easier toclean theinterior. Regardless ofwhat mats
are used, besure theyarefitted foryour vehicle and
are properly positioned inthe foot well toprevent
interference withpedal operation. Matsshould be
maintained withregular cleaning andreplaced ifthey
become excessively worn.
Floor matpositioning aid(driver's side)
GUID-0F 3306F1-4A E6-4165-B1 83-646B6 719990D
JV A0010X
Example (LHDmodel)
This vehicle includes frontfloormatbrackets toact as
a floor matpositioning aid.NISSAN floormats have
been specially designed foryour vehicle model.
P osition themat byplacing thefloor matbracket hook
through thefloor matgrommet holewhile centering the
mat inthe foot area.
Periodically checkthatthemats areproperly posi-
tioned.
GLASS
GUID-47B68 639-6537-4853-8BB4-A5E527CF1 D3C
Use glass cleaner toremove smokeanddust filmfrom
the glass surfaces. Itis normal forglass tobecome
coated withafilm after thevehicle isparked inthe hot
sun. Glass cleaner andasoft cloth willeasily remove
this film.
CAUTION:
When cleaning theinside ofthe windows, donot
use sharp-edged tools,abrasive cleanersor
chlorine-based disinfectantcleaners.Theycould
damage theelectrical conductors, suchasrear
window defogger elements.
SEA TBEL TS
GUID-30 F2EF69-84CD -4146-8EDF-44903B81 C08C
WARNING:
. Donot allow wetseat belts toroll upinthe
retractor.
. Never usebleach, dyeorchemical solvents
to clean theseat belts, sincethese materials
may severely weakentheseat beltwebbing.
The seat belts canbecleaned bywiping themwitha
sponge dampened inamild soap solution.
Allow thebelts todry completely inthe shade before
using them. (SeeªSeat beltsº (P.1-7) .)
& R Q G L W L R Q