seats NISSAN QUEST 2000 V41 / 2.G Owners Manual

Table of
ContentsSeats, restraints and supplemental air bag systems
Instruments and controls
Pre-driving checks and adjustments
Heater, air conditioner and audio systems
Starting and driving
In case of emergency
Appearance and care
Do-it-yourself
Maintenance
Technical and consumer information
Index
1
2
3
4
5
6
7
8
9
10
11

1 Seats, restraints and supplemental air
bag systems
Seats ......................................................................1-2
Front manual seat adjustment ...............................1-3
Front power seat adjustment (if so equipped) .......1-4
Three-passenger seat adjustment .........................1-7
Head restraint adjustment ....................................1-10
Armrests ...............................................................1-11
Underseat storage tray.........................................1-11
Flexible seating .................................................1-12
Tabletop seats ......................................................1-18
Seats/floor mats ...................................................1-19
Seating arrangements ..........................................1-19
Seat positions .......................................................1-20
With second row bench seat................................1-20
With second row bucket seats .............................1-24
Floor mat positions ...............................................1-27
Supplemental restraint system .............................1-31
Precautions on supplemental restraint system ....1-31
Supplemental air bag warning labels ...................1-36
Supplemental air bag warning light......................1-37
Seat belts .............................................................1-39
Precautions on seat belt usage ...........................1-39
Child safety...........................................................1-40Pregnant women ..................................................1-41
Injured persons ....................................................1-42
Three-point type seat belt with retractor ..............1-42
Three-point type seat belt with retractor for
second row bucket seats .....................................1-45
Three-passenger bench seat in the second
row position ..........................................................1-49
Three-passenger bench seat ...............................1-50
Two-point type seat belt without retractor
(center of rear seat) .............................................1-51
Seat belt extenders ..............................................1-53
Seat belt maintenance .........................................1-54
Precautions on child restraints .............................1-54
Child restraints .....................................................1-54
Installation on three-passenger bench seat
center position ......................................................1-56
Installation on second and third row outboard
positions ...............................................................1-59
Installation on front passenger seat .....................1-64
Child restraint with top tether strap ......................1-67
Installation on second row bench or bucket
seat .......................................................................1-68
ZX

Installation on three-passenger bench seat in
second row ...........................................................1-70
Installation on three-passenger bench seat in
third row................................................................1-70Integrated child safety seats (if so equipped) ......1-72
ZX

WARNING
cDo not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will
not be against your body. In an acci-
dent you could be thrown into it and
receive neck or other serious inju-
ries. You could also slide under the
lap belt and receive serious internal
injuries.cFor most effective protection when
the vehicle is in motion, the seat
should be upright. Always sit well
back in the seat and adjust the seat
properly. See ``Precautions on Seat
Belt Usage'' later in this section.
ARS1131
SEATS
1-2Seats, restraints and supplemental air bag systems
ZX

FRONT MANUAL SEAT
ADJUSTMENT
WARNING
cDo not adjust the driver's seat while
driving so full attention may be given
to vehicle operation. The seat may
move suddenly and could cause
loss of control of the vehicle.
cAfter adjustment, gently rock in the
seat to make sure it is securely
locked.
Forward and backward
Rotate the lever up while you slide the seat
forward or backward to the desired position.
Release the lever to lock the seat in position.
Reclining
To recline the seatback, pull the lever up and
lean back. To bring the seatback forward
again, pull the lever up and move your body
forward. The seatback moves forward. Re-
lease the lever to lock the seatback in position.
ARS1211
Seats, restraints and supplemental air bag systems1-3
ZX

FRONT POWER SEAT
ADJUSTMENT (if so equipped)
WARNING
cDo not adjust the driver's seat while
driving so full attention may be given
to vehicle operation.
c
Do not leave children unattended in-
side the vehicle. They could unknow-
ingly activate switches or controls.
Unattended children could become
involved in serious accidents.
For memory seat and mirror information
see ``Memory driver seat and mirrors'' in the
``Pre-driving checks and adjustments'' sec-
tion.
Operating tips
cThe motor has an auto-reset overload
protection circuit. If the motor stops dur-
ing operation, wait 30 seconds, then re-
activate the switch.cDo not operate the power support seat
for a long period of time when the engine
is off. This discharges the battery.
1-4Seats, restraints and supplemental air bag systems
ZX

Forward and backward
To move the seat forward, push the power
slide switch forward. To move the seat
backward, push the power slide switch
backward. Release the switch to stop the
movement of the seat.
Reclining
To recline the seat back, push the power
recliner switch backward. To return to a
more upright position, push the power re-
cliner switch forward. Release the switch to
stop the movement of the seatback.
ARS1212
ARS1120
Seats, restraints and supplemental air bag systems1-5
ZX

Seat lifter (driver's seat only)
To raise the height of the seat, lift the power
seat height switch and release it when the
desired position is reached. To lower the
height of the seat, push the power seat
height switch down and release it when the
desired position is reached.
Lumbar support (if so equipped for
driver's seat)
The lumbar support provides lower back
support to the driver. Move the lever up or
down to adjust the seat lumbar area.
ARS1158ARS1121
1-6Seats, restraints and supplemental air bag systems
ZX

THREE-PASSENGER SEAT
ADJUSTMENT
Reclining
To recline the three-passenger seat, lift up
on the lever and lean back until the desired
position is reached. To bring the seatback
forward, pull the lever up and lean your
body forward.
WARNING
cDo not recline the seatback while the
vehicle is moving.
cDo not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will
not be against your body. In an acci-
dent you could be thrown into it and
receive neck or other serious inju-
ries. You could also slide under the
lap belt and receive serious internal
injuries.c
For most effective protection when
the vehicle is in motion, the seat
should be upright. Always sit well
back in the seat and adjust the seat
belt properly. See ``Precautions on
seat belt usage'' later in this section.
cAfter adjustment, gently rock in the
seat to make sure it is securely
locked.
APD0852
Seats, restraints and supplemental air bag systems1-7
ZX

Sliding
Before sliding the seat, fasten the center
belt tongue to the center buckle and remove
the appropriate floor mats.1. Lift the seat cushion release lever.
2. Lift the seat cushion up into the locked
position.
3. Lift the slide release lever and grasp the
bar under the seat in the center.
4. Slide the seat until locked at a passenger
seating position or a storage position.
After the seat starts moving, release the
slide lever. The seat latches at the next
latching position. Continue to lift and
release the slide lever until the desired
position is obtained.
To lower the cushion, the seat must be
locked at a passenger seating position. Lift
the seat cushion release lever and lower the
cushion until locked.
The seat cushion cannot be lowered in a
storage position. This prevents a pas-
senger from using a seat or seat belt that
is out of a seating position.
APD0853
1-8Seats, restraints and supplemental air bag systems
ZX