NISSAN QUEST 2007 V42 / 3.G Quick Reference Guide
Manufacturer: NISSAN, Model Year: 2007, Model line: QUEST, Model: NISSAN QUEST 2007 V42 / 3.GPages: 14, PDF Size: 4.21 MB
Page 11 of 14
POWER SlIDING DOORS AND
POWER lIFT GATE (if so equipped)
P OWER SLIDING DOORS
The power sliding doors can be activated
by the buttons on the keyfob, the overhead
console, and the door pillars.
To open, close or reverse a sliding door, the ignition switch must be off or the automatic
transmission selector lever must be in P (Park).
To open, close or reverse a sliding door with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To activate a sliding door with the button on the door pillar, the main
ON/OFF switch must be
on, the door must be unlocked, and the child safety door lock must be in the unlock position.
To activate the power assist feature, manually move a sliding door toward the open or close
position using the inside or outside handle. The power assist feature will automatically
complete the motion.
P OWER LIFT GATE
The power lift gate can be activated by the buttons on the keyfob, the overhead console, and the
rear door pillar.
To open, close or reverse the lift gate, the automatic transmission lever must be in P (Park).
To open, close or reverse the lift gate with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To close the lift gate with the rear door pillar button, the main
ON/OFF switch must be on.
The power sliding doors and the power lift gate have an anti-pinch safety feature. Please refer
to your Owner’s Manual for more information regarding this feature.
AUTOMATI c DRIVER POSITIONER (if so equipped)
The automatic driver positioner system has two features:
Memory storage function
Entry/exit function
MEMORY STOR AGE FUNCTION
Two positions for the driver’s seat, accelerator and brake pedals, and outside mirrors
can be stored in the automatic driver positioner memory. Follow these procedures to set
driver preferences.
SET THE DESIRED POSITIONING
1. Set the automatic transmission lever to the P (Park) position.
2. Turn the ignition on and adjust the driver’s seat, accelerator and brake pedals, and
outside mirrors to the desired positions.
3. Press the
SET (memory) button and within 5 seconds press the position button
(1 or 2 ) for at least 1 second until the indicator light illuminates. The position is now
stored in memory.
LINK TO KEYFOB
Within 5 seconds of setting the memory position (indicator light is on and ignition is
on), press the
LPD0150 button on the remote.
A keyfob can be linked to each memory button.
If memory positioning is re-set to a new location, the keyfob automatically re-links.
RECALLING A MEMORY SET TING FROM THE MEMORY PAD
With the automatic transmission lever in the P (Park) position, press the position
button (
1 or 2 ) for at least 1 second.
FROM THE KEYFOB
If properly linked, operation of the
lpd0151
button
will automatically return the driver’s seat,
accelerator and brake pedals, and outside mirrors to the memorized position.
ENTRY/ EXIT FUNCTION
The driver’s seat moves to allow the driver to get into and out of the driver’s seat more
easily. The driver’s seat slides backward when:
The key is removed from the ignition switch.
The driver’s door is opened with the key turned to LOCK.
The key is turned from ACC to LOCK with the driver’s door open and the automatic
transmission lever is in the P (Park) position.
The driver’s seat returns to the previous position when:
The key is inserted into the ignition switch.
The driver’s door is closed with the key turned to LOCK.
The key is turned from ACC to ON while the automatic transmission lever is in the
P (Park) position.
Sh ift_convention
LOCK DOORS
Press the
LPD0150 button
to lock all doors.
UNLOCK DOORS
Press the
lpd0151
button
once to unlock the driver’s door
only. Press the button again within 5 seconds to
unlock all doors.
POWER SLIDING DOORS (if so equipped)
Press and hold the
WPD03361A
button
for longer than 0.5
seconds to open or close the power sliding door.
The door will reverse direction immediately during
power open or power close if the keyfob button is
pressed. A chime will sound to indicate the reversal.
POWER LIFT GATE (if so equipped)
Press and hold the
WPD0337
1A
button
for longer than 0.5
seconds to open or close the power lift gate. The
hazard lights will flash and a chime will sound to
indicate that the power open or power close sequence has started. If you press
the button again, the lift gate will reverse direction immediately; a chime will sound
to indicate the reversal.
SI lEN cING THE HORN BEEP FEATURE
For vehicles without Navigation system:
To deactivate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds.
To activate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds once more.
For vehicles with Navigation system:
Refer to the “Display screen, heater, air conditioner, audio and phone systems” section in
your Owner’s Manual for the procedure.
If you change the horn beep feature with the keyfob, the display screen will not show the
current mode and cannot be used to change the mode. Use the keyfob to return to the
previous mode and re-enable the display screen control.
REMOTE KEY lESS ENTRY SYSTEM
2007
QU EST
Q U I C K R E F E R E N C E G U I D E
SEEK /TRACK BUTTON
Press the SEEK/TRACK button to skip from one track to another on a CD. Each
time the button is pressed, the CD will advance or skip back one track. Press
and hold the
SEEK/TRACK button for longer than 1.5 seconds to fast forward or
rewind a track. The disc will play at an altered speed until the button is released.
TUNE/FLDR.CAT BUTTON
Press the TUNE/FLDR.CAT button to manually tune the radio. Press the TUNE/FLDR.CAT button if playing a CD that is formatted with MP3 folders to skip to the
next folder.
FM/AM/SAT* BUTTON
Pressing the FM/AM/SAT * radio select button will change the band to either FM,
AM or SAT* radio stations.
SCAN BUTTON
Press the
SCAN button to quickly scan through each broadcasting station. The
tuner will pause for 5 seconds on each broadcasting station.
PR ESET A
.B.
C BU TTON
Press the
PRESET A.B.C button until you reach the desired setting. The radio is
equipped with three separate banks, each with six station presets. You may store
any combination of AM, FM or SAT* radio presets on each bank.
CD PLAY BUTTON
Press the CD/DVD button to begin CD play.
REAR CTRL BUTTON
Press the REAR CTRL button to turn the rear audio controls on. Press again to
turn the rear controller off.
SPEAKER CONTROL BUTTON
Press the speaker control button to activate the rear headphones and turn off the
rear speakers. Press the button again to deactivate the rear headphones.
AUDIO BUTTON
Press the AUDIO button to change the audio settings. Adjust the bass, mid, treble,
fade, balance and Speed Sensitive Volume (SSV) by pressing the AUDIO button
until the desired mode appears in the display. Press the TUNE/FLDR.CAT button
up or down to adjust to the desired level.
STATION AND CD SELE CT BU TTONS
To store a station in a preset you must first select A, B, or C memory bank by
pressing the
PRESET A.B.C button and tune to the desired AM, FM or SAT*
station. Then press and hold the desired station select button for at least 2
seconds. When the preset indicator illuminates, a beep will sound, indicating
memorization is complete. To retrieve a previously set station, select the memory
bank where the preset was set, then press the corresponding station select
button.
FM/AM/SAT* R
ADIO WITH cD cHANGER (
if so equipped)
* SAT presets are only available on SAT equipped vehicles.
08
0607
05
03
0201
10
04
05
04
09
08
07
06
03
02
01
10REAR VIEW MONITOR (if so equipped)
When the automatic transmission lever is moved to the R
(Reverse) position, the monitor display will automatically
change to show the area behind the vehicle.
The colored lines on the display screen indicate
approximate distances to objects.
Red 1.5 feet Yellow 3 feet Green 7 and 10 feet
STEERING WHEE l SWIT cHES FOR AUDIO
c ONTRO l
To choose Preset A, B, C, CD or SAT (if so equipped)
press
MODE repeatedly.
The tuning up or down
< >
switch can be used to
perform the following:
• Push the
< >
switch for less than 1.5 seconds to
change to a preset station.
• Push and hold the
< >
switch for more than 1.5 seconds to seek to the next or
previous broadcasting radio station.
• Push the
< >
switch while playing a CD (if so equipped) for less than 1.5 seconds to
change programs on the CD.
• If the vehicle is equipped with a CD changer, push and hold for more than 1.5
seconds to change between CDs.
HEAD
lIGHT AND TURN SIGNA l c ONTRO l
HEADLIGHT SWITCH
Turn the headlight switch to the position
to turn
on the front parking, tail, license plate and instrument
panel lights.
Turn the headlight switch to the position
to turn on the headlights. All other
lights remain on.
HIGH BEAM
Push the headlight switch forward to select the high beam function. The blue
indicator light illuminates. Pull the headlight switch back to the original position to
select the low beam. The blue
indicator light goes off.
Pull and release the headlight switch to flash the headlight high beams on and off.
TURN SIGNAL SWITCH
Move the headlight control switch up or down to signal the turning direction. When
the turn is completed, the turn signals cancel automatically.
To signal a lane change, move the headlight control switch up or down to the point
where the indicator light begins to flash, but the headlight control switch does not
latch.
AUTOMATIC HEADLIGHT OPERATION (if so equipped)
The autolight system can:
Turn the headlights on automatically when it is dark.
Turn the headlights off automatically when it is light.
Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and
all doors are closed.
TO ACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the AUTO position, then turn the ignition switch to ON.
TO DEACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the OFF , or position.
FOG LIGHT OPERATION (if so equipped)
Note:
The headlights must be on and the low beams selected for the fog lights to
operate.
Turn the switch to the position to turn on the fog lights.
Turn the switch to the OFF position to turn off the fog lights.
WINDSHIE lD WIPER/WASHER SWIT cH
The ignition switch must be in the ON position to activate
the windshield wipers.
Push the lever down to operate the windshield wipers.
Switch operation includes:
Intermittent – Wipers operate intermittently and
can be adjusted by turning the time control. Also, the intermittent operation speed
varies in accordance with the vehicle speed. (For example, when the vehicle speed
is high, the intermittent operation speed is faster.)
Low speed – Wipers operate at a continuous low speed.
High speed – Wipers operate at a continuous high speed.
Mist – Lift the lever up for one sweep operation of the wiper.
Wash – Pull the lever toward you. Wipers automatically wipe several times.
Rear wiper and washer switch – The rear window wiper and washer operates when the
ignition switch is in the ON position. Switch operation includes:
Intermittent (not adjustable) – Wipers operate intermittently.
On – Wipers operate at a continuous speed.
Wash – Push the lever away from you. Wipers automatically wipe several times.
INT
lO
HI
MIST
INT
ON
LCN0042
LCN0042
REAR SONAR SYSTEM OFF SWIT cH (if so equipped)
When backing up, this system will beep to alert you to obstacles within 6
ft. (1.8 m) of the rear bumper. The system beeps faster as the vehicle gets
closer to the obstacle. A continuous tone sounds when an obstacle is
less than 10 inches (25 cm) away from the bumper. Turn the system off by
pushing the rear sonar system
OFF switch. The system will automatically
reset the next time the ignition switch is turned on.
lIGHTS ON DEMAND
The LIGHTS ON DEMAND switch allows the driver to select one of three
lighting modes for the interior lights and puddle lamps (if so equipped):
Push the top portion of the switch and the interior lights and puddle
lamps will illuminate. The lights will turn off automatically after 30
minutes to prevent the battery from becoming discharged.
Push the switch to the neutral position and the lights will stay on
for approximately 30 seconds when:
The doors are unlocked by the keyfob, a key, or the power door lock switch while all
doors are closed and the ignition switch is in the OFF position.
The driver’s door is opened and then closed while the key is removed from the
ignition switch.
The key is removed from the ignition switch while all doors are closed.
The interior lights and puddle lamps (if so equipped) will turn off while the 30-second
timer is activated when:
The driver’s door is locked by the keyfob, a key, or the power door lock switch.
The ignition switch is turned on.
The lights will turn off automatically after 30 minutes while the doors are open to
prevent the battery from becoming discharged.
Push the bottom portion of the switch and the interior lights and puddle lamps (if so
equipped) will not illuminate.
The lights can be turned off so sleeping passengers are not disturbed when the
doors are opened.
The lights on the front doors will turn on when the front doors are opened.
09
cONTRO l PANE l DISP lAY WITH
N AVIGATION SYSTEM
(if so equipped)
TRIP BUTTON
When the
TRIP button is pressed, the fol-
lowing modes will display on the screen:
Warning message (if there are any)
TRIP 1 (Elapsed Time, Driving Distance,
Average Speed)
TRIP 2 (Elapsed Time, Driving Distance, Average Speed)
FUEL ECONOMY (Average Fuel Economy, Distance to Empty)
MAINTENANCE (Engine Oil, Tire Rotation and Tire Pressure)
OFF
MAINTENANCE ITEMS
You can set the engine oil and the tire rotation interval. To display the setting of the
maintenance interval, select the
ENGINE OIL or TIRE ROTATION key using the
joystick and press the
ENTER button. To set the maintenance interval, select the
MAINTENANCE SCHEDULE key using the joystick and push the joystick to the right
or left. To reset the maintenance interval, select the
RESET key using the joystick
and press the
ENTER button. To view the vehicle’s tire pressure, select the TIRE
PRESSURE key using the joystick and press the ENTER button.
DISPLAY SCREEN SETTINGS
The
SETTING screen will appear when the SETTING button is pressed. Select the
DISPLAY key with the joystick and press the ENTER button to choose from various
display screen options. The
DISPLAY key will allow you to personalize the information
shown on the display screen, such as climate control or audio system display.
Refer to your Owner’s Manual and Navigation System Owner’s Manual for additional
information on your navigation system.
Page 12 of 14
POWER SlIDING DOORS AND
POWER lIFT GATE (if so equipped)
P OWER SLIDING DOORS
The power sliding doors can be activated
by the buttons on the keyfob, the overhead
console, and the door pillars.
To open, close or reverse a sliding door, the ignition switch must be off or the automatic
transmission selector lever must be in P (Park).
To open, close or reverse a sliding door with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To activate a sliding door with the button on the door pillar, the main
ON/OFF switch must be
on, the door must be unlocked, and the child safety door lock must be in the unlock position.
To activate the power assist feature, manually move a sliding door toward the open or close
position using the inside or outside handle. The power assist feature will automatically
complete the motion.
P OWER LIFT GATE
The power lift gate can be activated by the buttons on the keyfob, the overhead console, and the
rear door pillar.
To open, close or reverse the lift gate, the automatic transmission lever must be in P (Park).
To open, close or reverse the lift gate with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To close the lift gate with the rear door pillar button, the main
ON/OFF switch must be on.
The power sliding doors and the power lift gate have an anti-pinch safety feature. Please refer
to your Owner’s Manual for more information regarding this feature.
AUTOMATI c DRIVER POSITIONER (if so equipped)
The automatic driver positioner system has two features:
Memory storage function
Entry/exit function
MEMORY STOR AGE FUNCTION
Two positions for the driver’s seat, accelerator and brake pedals, and outside mirrors
can be stored in the automatic driver positioner memory. Follow these procedures to set
driver preferences.
SET THE DESIRED POSITIONING
1. Set the automatic transmission lever to the P (Park) position.
2. Turn the ignition on and adjust the driver’s seat, accelerator and brake pedals, and
outside mirrors to the desired positions.
3. Press the
SET (memory) button and within 5 seconds press the position button
(1 or 2 ) for at least 1 second until the indicator light illuminates. The position is now
stored in memory.
LINK TO KEYFOB
Within 5 seconds of setting the memory position (indicator light is on and ignition is
on), press the
LPD0150 button on the remote.
A keyfob can be linked to each memory button.
If memory positioning is re-set to a new location, the keyfob automatically re-links.
RECALLING A MEMORY SET TING FROM THE MEMORY PAD
With the automatic transmission lever in the P (Park) position, press the position
button (
1 or 2 ) for at least 1 second.
FROM THE KEYFOB
If properly linked, operation of the
lpd0151
button
will automatically return the driver’s seat,
accelerator and brake pedals, and outside mirrors to the memorized position.
ENTRY/ EXIT FUNCTION
The driver’s seat moves to allow the driver to get into and out of the driver’s seat more
easily. The driver’s seat slides backward when:
The key is removed from the ignition switch.
The driver’s door is opened with the key turned to LOCK.
The key is turned from ACC to LOCK with the driver’s door open and the automatic
transmission lever is in the P (Park) position.
The driver’s seat returns to the previous position when:
The key is inserted into the ignition switch.
The driver’s door is closed with the key turned to LOCK.
The key is turned from ACC to ON while the automatic transmission lever is in the
P (Park) position.
Sh ift_convention
LOCK DOORS
Press the
LPD0150 button
to lock all doors.
UNLOCK DOORS
Press the
lpd0151
button
once to unlock the driver’s door
only. Press the button again within 5 seconds to
unlock all doors.
POWER SLIDING DOORS (if so equipped)
Press and hold the
WPD03361A
button
for longer than 0.5
seconds to open or close the power sliding door.
The door will reverse direction immediately during
power open or power close if the keyfob button is
pressed. A chime will sound to indicate the reversal.
POWER LIFT GATE (if so equipped)
Press and hold the
WPD0337
1A
button
for longer than 0.5
seconds to open or close the power lift gate. The
hazard lights will flash and a chime will sound to
indicate that the power open or power close sequence has started. If you press
the button again, the lift gate will reverse direction immediately; a chime will sound
to indicate the reversal.
SI lEN cING THE HORN BEEP FEATURE
For vehicles without Navigation system:
To deactivate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds.
To activate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds once more.
For vehicles with Navigation system:
Refer to the “Display screen, heater, air conditioner, audio and phone systems” section in
your Owner’s Manual for the procedure.
If you change the horn beep feature with the keyfob, the display screen will not show the
current mode and cannot be used to change the mode. Use the keyfob to return to the
previous mode and re-enable the display screen control.
REMOTE KEY lESS ENTRY SYSTEM
2007
QU EST
Q U I C K R E F E R E N C E G U I D E
SEEK /TRACK BUTTON
Press the SEEK/TRACK button to skip from one track to another on a CD. Each
time the button is pressed, the CD will advance or skip back one track. Press
and hold the
SEEK/TRACK button for longer than 1.5 seconds to fast forward or
rewind a track. The disc will play at an altered speed until the button is released.
TUNE/FLDR.CAT BUTTON
Press the TUNE/FLDR.CAT button to manually tune the radio. Press the TUNE/FLDR.CAT button if playing a CD that is formatted with MP3 folders to skip to the
next folder.
FM/AM/SAT* BUTTON
Pressing the FM/AM/SAT * radio select button will change the band to either FM,
AM or SAT* radio stations.
SCAN BUTTON
Press the
SCAN button to quickly scan through each broadcasting station. The
tuner will pause for 5 seconds on each broadcasting station.
PR ESET A
.B.
C BU TTON
Press the
PRESET A.B.C button until you reach the desired setting. The radio is
equipped with three separate banks, each with six station presets. You may store
any combination of AM, FM or SAT* radio presets on each bank.
CD PLAY BUTTON
Press the CD/DVD button to begin CD play.
REAR CTRL BUTTON
Press the REAR CTRL button to turn the rear audio controls on. Press again to
turn the rear controller off.
SPEAKER CONTROL BUTTON
Press the speaker control button to activate the rear headphones and turn off the
rear speakers. Press the button again to deactivate the rear headphones.
AUDIO BUTTON
Press the AUDIO button to change the audio settings. Adjust the bass, mid, treble,
fade, balance and Speed Sensitive Volume (SSV) by pressing the AUDIO button
until the desired mode appears in the display. Press the TUNE/FLDR.CAT button
up or down to adjust to the desired level.
STATION AND CD SELE CT BU TTONS
To store a station in a preset you must first select A, B, or C memory bank by
pressing the
PRESET A.B.C button and tune to the desired AM, FM or SAT*
station. Then press and hold the desired station select button for at least 2
seconds. When the preset indicator illuminates, a beep will sound, indicating
memorization is complete. To retrieve a previously set station, select the memory
bank where the preset was set, then press the corresponding station select
button.
FM/AM/SAT* R
ADIO WITH cD cHANGER (
if so equipped)
* SAT presets are only available on SAT equipped vehicles.
08
0607
05
03
0201
10
04
05
04
09
08
07
06
03
02
01
10REAR VIEW MONITOR (if so equipped)
When the automatic transmission lever is moved to the R
(Reverse) position, the monitor display will automatically
change to show the area behind the vehicle.
The colored lines on the display screen indicate
approximate distances to objects.
Red 1.5 feet Yellow 3 feet Green 7 and 10 feet
STEERING WHEE l SWIT cHES FOR AUDIO
c ONTRO l
To choose Preset A, B, C, CD or SAT (if so equipped)
press
MODE repeatedly.
The tuning up or down
< >
switch can be used to
perform the following:
• Push the
< >
switch for less than 1.5 seconds to
change to a preset station.
• Push and hold the
< >
switch for more than 1.5 seconds to seek to the next or
previous broadcasting radio station.
• Push the
< >
switch while playing a CD (if so equipped) for less than 1.5 seconds to
change programs on the CD.
• If the vehicle is equipped with a CD changer, push and hold for more than 1.5
seconds to change between CDs.
HEAD
lIGHT AND TURN SIGNA l c ONTRO l
HEADLIGHT SWITCH
Turn the headlight switch to the position
to turn
on the front parking, tail, license plate and instrument
panel lights.
Turn the headlight switch to the position
to turn on the headlights. All other
lights remain on.
HIGH BEAM
Push the headlight switch forward to select the high beam function. The blue
indicator light illuminates. Pull the headlight switch back to the original position to
select the low beam. The blue
indicator light goes off.
Pull and release the headlight switch to flash the headlight high beams on and off.
TURN SIGNAL SWITCH
Move the headlight control switch up or down to signal the turning direction. When
the turn is completed, the turn signals cancel automatically.
To signal a lane change, move the headlight control switch up or down to the point
where the indicator light begins to flash, but the headlight control switch does not
latch.
AUTOMATIC HEADLIGHT OPERATION (if so equipped)
The autolight system can:
Turn the headlights on automatically when it is dark.
Turn the headlights off automatically when it is light.
Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and
all doors are closed.
TO ACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the AUTO position, then turn the ignition switch to ON.
TO DEACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the OFF , or position.
FOG LIGHT OPERATION (if so equipped)
Note:
The headlights must be on and the low beams selected for the fog lights to
operate.
Turn the switch to the position to turn on the fog lights.
Turn the switch to the OFF position to turn off the fog lights.
WINDSHIE lD WIPER/WASHER SWIT cH
The ignition switch must be in the ON position to activate
the windshield wipers.
Push the lever down to operate the windshield wipers.
Switch operation includes:
Intermittent – Wipers operate intermittently and
can be adjusted by turning the time control. Also, the intermittent operation speed
varies in accordance with the vehicle speed. (For example, when the vehicle speed
is high, the intermittent operation speed is faster.)
Low speed – Wipers operate at a continuous low speed.
High speed – Wipers operate at a continuous high speed.
Mist – Lift the lever up for one sweep operation of the wiper.
Wash – Pull the lever toward you. Wipers automatically wipe several times.
Rear wiper and washer switch – The rear window wiper and washer operates when the
ignition switch is in the ON position. Switch operation includes:
Intermittent (not adjustable) – Wipers operate intermittently.
On – Wipers operate at a continuous speed.
Wash – Push the lever away from you. Wipers automatically wipe several times.
INT
lO
HI
MIST
INT
ON
LCN0042
LCN0042
REAR SONAR SYSTEM OFF SWIT cH (if so equipped)
When backing up, this system will beep to alert you to obstacles within 6
ft. (1.8 m) of the rear bumper. The system beeps faster as the vehicle gets
closer to the obstacle. A continuous tone sounds when an obstacle is
less than 10 inches (25 cm) away from the bumper. Turn the system off by
pushing the rear sonar system
OFF switch. The system will automatically
reset the next time the ignition switch is turned on.
lIGHTS ON DEMAND
The LIGHTS ON DEMAND switch allows the driver to select one of three
lighting modes for the interior lights and puddle lamps (if so equipped):
Push the top portion of the switch and the interior lights and puddle
lamps will illuminate. The lights will turn off automatically after 30
minutes to prevent the battery from becoming discharged.
Push the switch to the neutral position and the lights will stay on
for approximately 30 seconds when:
The doors are unlocked by the keyfob, a key, or the power door lock switch while all
doors are closed and the ignition switch is in the OFF position.
The driver’s door is opened and then closed while the key is removed from the
ignition switch.
The key is removed from the ignition switch while all doors are closed.
The interior lights and puddle lamps (if so equipped) will turn off while the 30-second
timer is activated when:
The driver’s door is locked by the keyfob, a key, or the power door lock switch.
The ignition switch is turned on.
The lights will turn off automatically after 30 minutes while the doors are open to
prevent the battery from becoming discharged.
Push the bottom portion of the switch and the interior lights and puddle lamps (if so
equipped) will not illuminate.
The lights can be turned off so sleeping passengers are not disturbed when the
doors are opened.
The lights on the front doors will turn on when the front doors are opened.
09
cONTRO l PANE l DISP lAY WITH
N AVIGATION SYSTEM
(if so equipped)
TRIP BUTTON
When the
TRIP button is pressed, the fol-
lowing modes will display on the screen:
Warning message (if there are any)
TRIP 1 (Elapsed Time, Driving Distance,
Average Speed)
TRIP 2 (Elapsed Time, Driving Distance, Average Speed)
FUEL ECONOMY (Average Fuel Economy, Distance to Empty)
MAINTENANCE (Engine Oil, Tire Rotation and Tire Pressure)
OFF
MAINTENANCE ITEMS
You can set the engine oil and the tire rotation interval. To display the setting of the
maintenance interval, select the
ENGINE OIL or TIRE ROTATION key using the
joystick and press the
ENTER button. To set the maintenance interval, select the
MAINTENANCE SCHEDULE key using the joystick and push the joystick to the right
or left. To reset the maintenance interval, select the
RESET key using the joystick
and press the
ENTER button. To view the vehicle’s tire pressure, select the TIRE
PRESSURE key using the joystick and press the ENTER button.
DISPLAY SCREEN SETTINGS
The
SETTING screen will appear when the SETTING button is pressed. Select the
DISPLAY key with the joystick and press the ENTER button to choose from various
display screen options. The
DISPLAY key will allow you to personalize the information
shown on the display screen, such as climate control or audio system display.
Refer to your Owner’s Manual and Navigation System Owner’s Manual for additional
information on your navigation system.
Page 13 of 14
POWER SlIDING DOORS AND
POWER lIFT GATE (if so equipped)
P OWER SLIDING DOORS
The power sliding doors can be activated
by the buttons on the keyfob, the overhead
console, and the door pillars.
To open, close or reverse a sliding door, the ignition switch must be off or the automatic
transmission selector lever must be in P (Park).
To open, close or reverse a sliding door with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To activate a sliding door with the button on the door pillar, the main
ON/OFF switch must be
on, the door must be unlocked, and the child safety door lock must be in the unlock position.
To activate the power assist feature, manually move a sliding door toward the open or close
position using the inside or outside handle. The power assist feature will automatically
complete the motion.
P OWER LIFT GATE
The power lift gate can be activated by the buttons on the keyfob, the overhead console, and the
rear door pillar.
To open, close or reverse the lift gate, the automatic transmission lever must be in P (Park).
To open, close or reverse the lift gate with the keyfob, press and hold the keyfob button for
longer than 0.5 seconds.
To close the lift gate with the rear door pillar button, the main
ON/OFF switch must be on.
The power sliding doors and the power lift gate have an anti-pinch safety feature. Please refer
to your Owner’s Manual for more information regarding this feature.
AUTOMATI c DRIVER POSITIONER (if so equipped)
The automatic driver positioner system has two features:
Memory storage function
Entry/exit function
MEMORY STOR AGE FUNCTION
Two positions for the driver’s seat, accelerator and brake pedals, and outside mirrors
can be stored in the automatic driver positioner memory. Follow these procedures to set
driver preferences.
SET THE DESIRED POSITIONING
1. Set the automatic transmission lever to the P (Park) position.
2. Turn the ignition on and adjust the driver’s seat, accelerator and brake pedals, and
outside mirrors to the desired positions.
3. Press the
SET (memory) button and within 5 seconds press the position button
(1 or 2 ) for at least 1 second until the indicator light illuminates. The position is now
stored in memory.
LINK TO KEYFOB
Within 5 seconds of setting the memory position (indicator light is on and ignition is
on), press the
LPD0150 button on the remote.
A keyfob can be linked to each memory button.
If memory positioning is re-set to a new location, the keyfob automatically re-links.
RECALLING A MEMORY SET TING FROM THE MEMORY PAD
With the automatic transmission lever in the P (Park) position, press the position
button (
1 or 2 ) for at least 1 second.
FROM THE KEYFOB
If properly linked, operation of the
lpd0151
button
will automatically return the driver’s seat,
accelerator and brake pedals, and outside mirrors to the memorized position.
ENTRY/ EXIT FUNCTION
The driver’s seat moves to allow the driver to get into and out of the driver’s seat more
easily. The driver’s seat slides backward when:
The key is removed from the ignition switch.
The driver’s door is opened with the key turned to LOCK.
The key is turned from ACC to LOCK with the driver’s door open and the automatic
transmission lever is in the P (Park) position.
The driver’s seat returns to the previous position when:
The key is inserted into the ignition switch.
The driver’s door is closed with the key turned to LOCK.
The key is turned from ACC to ON while the automatic transmission lever is in the
P (Park) position.
Sh ift_convention
LOCK DOORS
Press the
LPD0150 button
to lock all doors.
UNLOCK DOORS
Press the
lpd0151
button
once to unlock the driver’s door
only. Press the button again within 5 seconds to
unlock all doors.
POWER SLIDING DOORS (if so equipped)
Press and hold the
WPD03361A
button
for longer than 0.5
seconds to open or close the power sliding door.
The door will reverse direction immediately during
power open or power close if the keyfob button is
pressed. A chime will sound to indicate the reversal.
POWER LIFT GATE (if so equipped)
Press and hold the
WPD0337
1A
button
for longer than 0.5
seconds to open or close the power lift gate. The
hazard lights will flash and a chime will sound to
indicate that the power open or power close sequence has started. If you press
the button again, the lift gate will reverse direction immediately; a chime will sound
to indicate the reversal.
SI lEN cING THE HORN BEEP FEATURE
For vehicles without Navigation system:
To deactivate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds.
To activate: Press and hold the
LPD0150 and
lpd0151
buttons for at least 2 seconds once more.
For vehicles with Navigation system:
Refer to the “Display screen, heater, air conditioner, audio and phone systems” section in
your Owner’s Manual for the procedure.
If you change the horn beep feature with the keyfob, the display screen will not show the
current mode and cannot be used to change the mode. Use the keyfob to return to the
previous mode and re-enable the display screen control.
REMOTE KEY lESS ENTRY SYSTEM
2007
QU EST
Q U I C K R E F E R E N C E G U I D E
SEEK /TRACK BUTTON
Press the SEEK/TRACK button to skip from one track to another on a CD. Each
time the button is pressed, the CD will advance or skip back one track. Press
and hold the
SEEK/TRACK button for longer than 1.5 seconds to fast forward or
rewind a track. The disc will play at an altered speed until the button is released.
TUNE/FLDR.CAT BUTTON
Press the TUNE/FLDR.CAT button to manually tune the radio. Press the TUNE/FLDR.CAT button if playing a CD that is formatted with MP3 folders to skip to the
next folder.
FM/AM/SAT* BUTTON
Pressing the FM/AM/SAT * radio select button will change the band to either FM,
AM or SAT* radio stations.
SCAN BUTTON
Press the
SCAN button to quickly scan through each broadcasting station. The
tuner will pause for 5 seconds on each broadcasting station.
PR ESET A
.B.
C BU TTON
Press the
PRESET A.B.C button until you reach the desired setting. The radio is
equipped with three separate banks, each with six station presets. You may store
any combination of AM, FM or SAT* radio presets on each bank.
CD PLAY BUTTON
Press the CD/DVD button to begin CD play.
REAR CTRL BUTTON
Press the REAR CTRL button to turn the rear audio controls on. Press again to
turn the rear controller off.
SPEAKER CONTROL BUTTON
Press the speaker control button to activate the rear headphones and turn off the
rear speakers. Press the button again to deactivate the rear headphones.
AUDIO BUTTON
Press the AUDIO button to change the audio settings. Adjust the bass, mid, treble,
fade, balance and Speed Sensitive Volume (SSV) by pressing the AUDIO button
until the desired mode appears in the display. Press the TUNE/FLDR.CAT button
up or down to adjust to the desired level.
STATION AND CD SELE CT BU TTONS
To store a station in a preset you must first select A, B, or C memory bank by
pressing the
PRESET A.B.C button and tune to the desired AM, FM or SAT*
station. Then press and hold the desired station select button for at least 2
seconds. When the preset indicator illuminates, a beep will sound, indicating
memorization is complete. To retrieve a previously set station, select the memory
bank where the preset was set, then press the corresponding station select
button.
FM/AM/SAT* R
ADIO WITH cD cHANGER (
if so equipped)
* SAT presets are only available on SAT equipped vehicles.
08
0607
05
03
0201
10
04
05
04
09
08
07
06
03
02
01
10REAR VIEW MONITOR (if so equipped)
When the automatic transmission lever is moved to the R
(Reverse) position, the monitor display will automatically
change to show the area behind the vehicle.
The colored lines on the display screen indicate
approximate distances to objects.
Red 1.5 feet Yellow 3 feet Green 7 and 10 feet
STEERING WHEE l SWIT cHES FOR AUDIO
c ONTRO l
To choose Preset A, B, C, CD or SAT (if so equipped)
press
MODE repeatedly.
The tuning up or down
< >
switch can be used to
perform the following:
• Push the
< >
switch for less than 1.5 seconds to
change to a preset station.
• Push and hold the
< >
switch for more than 1.5 seconds to seek to the next or
previous broadcasting radio station.
• Push the
< >
switch while playing a CD (if so equipped) for less than 1.5 seconds to
change programs on the CD.
• If the vehicle is equipped with a CD changer, push and hold for more than 1.5
seconds to change between CDs.
HEAD
lIGHT AND TURN SIGNA l c ONTRO l
HEADLIGHT SWITCH
Turn the headlight switch to the position
to turn
on the front parking, tail, license plate and instrument
panel lights.
Turn the headlight switch to the position
to turn on the headlights. All other
lights remain on.
HIGH BEAM
Push the headlight switch forward to select the high beam function. The blue
indicator light illuminates. Pull the headlight switch back to the original position to
select the low beam. The blue
indicator light goes off.
Pull and release the headlight switch to flash the headlight high beams on and off.
TURN SIGNAL SWITCH
Move the headlight control switch up or down to signal the turning direction. When
the turn is completed, the turn signals cancel automatically.
To signal a lane change, move the headlight control switch up or down to the point
where the indicator light begins to flash, but the headlight control switch does not
latch.
AUTOMATIC HEADLIGHT OPERATION (if so equipped)
The autolight system can:
Turn the headlights on automatically when it is dark.
Turn the headlights off automatically when it is light.
Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and
all doors are closed.
TO ACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the AUTO position, then turn the ignition switch to ON.
TO DEACTIVATE THE AUTOLIGHT SYSTEM :
Turn the headlight switch to the OFF , or position.
FOG LIGHT OPERATION (if so equipped)
Note:
The headlights must be on and the low beams selected for the fog lights to
operate.
Turn the switch to the position to turn on the fog lights.
Turn the switch to the OFF position to turn off the fog lights.
WINDSHIE lD WIPER/WASHER SWIT cH
The ignition switch must be in the ON position to activate
the windshield wipers.
Push the lever down to operate the windshield wipers.
Switch operation includes:
Intermittent – Wipers operate intermittently and
can be adjusted by turning the time control. Also, the intermittent operation speed
varies in accordance with the vehicle speed. (For example, when the vehicle speed
is high, the intermittent operation speed is faster.)
Low speed – Wipers operate at a continuous low speed.
High speed – Wipers operate at a continuous high speed.
Mist – Lift the lever up for one sweep operation of the wiper.
Wash – Pull the lever toward you. Wipers automatically wipe several times.
Rear wiper and washer switch – The rear window wiper and washer operates when the
ignition switch is in the ON position. Switch operation includes:
Intermittent (not adjustable) – Wipers operate intermittently.
On – Wipers operate at a continuous speed.
Wash – Push the lever away from you. Wipers automatically wipe several times.
INT
lO
HI
MIST
INT
ON
LCN0042
LCN0042
REAR SONAR SYSTEM OFF SWIT cH (if so equipped)
When backing up, this system will beep to alert you to obstacles within 6
ft. (1.8 m) of the rear bumper. The system beeps faster as the vehicle gets
closer to the obstacle. A continuous tone sounds when an obstacle is
less than 10 inches (25 cm) away from the bumper. Turn the system off by
pushing the rear sonar system
OFF switch. The system will automatically
reset the next time the ignition switch is turned on.
lIGHTS ON DEMAND
The LIGHTS ON DEMAND switch allows the driver to select one of three
lighting modes for the interior lights and puddle lamps (if so equipped):
Push the top portion of the switch and the interior lights and puddle
lamps will illuminate. The lights will turn off automatically after 30
minutes to prevent the battery from becoming discharged.
Push the switch to the neutral position and the lights will stay on
for approximately 30 seconds when:
The doors are unlocked by the keyfob, a key, or the power door lock switch while all
doors are closed and the ignition switch is in the OFF position.
The driver’s door is opened and then closed while the key is removed from the
ignition switch.
The key is removed from the ignition switch while all doors are closed.
The interior lights and puddle lamps (if so equipped) will turn off while the 30-second
timer is activated when:
The driver’s door is locked by the keyfob, a key, or the power door lock switch.
The ignition switch is turned on.
The lights will turn off automatically after 30 minutes while the doors are open to
prevent the battery from becoming discharged.
Push the bottom portion of the switch and the interior lights and puddle lamps (if so
equipped) will not illuminate.
The lights can be turned off so sleeping passengers are not disturbed when the
doors are opened.
The lights on the front doors will turn on when the front doors are opened.
09
cONTRO l PANE l DISP lAY WITH
N AVIGATION SYSTEM
(if so equipped)
TRIP BUTTON
When the
TRIP button is pressed, the fol-
lowing modes will display on the screen:
Warning message (if there are any)
TRIP 1 (Elapsed Time, Driving Distance,
Average Speed)
TRIP 2 (Elapsed Time, Driving Distance, Average Speed)
FUEL ECONOMY (Average Fuel Economy, Distance to Empty)
MAINTENANCE (Engine Oil, Tire Rotation and Tire Pressure)
OFF
MAINTENANCE ITEMS
You can set the engine oil and the tire rotation interval. To display the setting of the
maintenance interval, select the
ENGINE OIL or TIRE ROTATION key using the
joystick and press the
ENTER button. To set the maintenance interval, select the
MAINTENANCE SCHEDULE key using the joystick and push the joystick to the right
or left. To reset the maintenance interval, select the
RESET key using the joystick
and press the
ENTER button. To view the vehicle’s tire pressure, select the TIRE
PRESSURE key using the joystick and press the ENTER button.
DISPLAY SCREEN SETTINGS
The
SETTING screen will appear when the SETTING button is pressed. Select the
DISPLAY key with the joystick and press the ENTER button to choose from various
display screen options. The
DISPLAY key will allow you to personalize the information
shown on the display screen, such as climate control or audio system display.
Refer to your Owner’s Manual and Navigation System Owner’s Manual for additional
information on your navigation system.
Page 14 of 14
QR7E-0V42U0 Printing: March 2006 (08)
Nissan, the Nissan Brand Symbol, “SHIFT_” tagline, Z and Nissan model names are Nissan trademarks.
©2006 Nissan North America, Inc.
Sh ift_
This easy-to-use Quick Reference Guide is intended to help you more fully appreciate
some of the unique features and functions of your new vehicle. However, it is not intended
to replace your Owner’s Manual. The Owner’s Manual contains more detailed information
to help you better understand the important safety warnings, features, operation, and
maintenance of your vehicle.
TIRE PRESSURE MONITORING SYSTEM (TPMS)
This system monitors tire pressure. Please remember, this system does
not detect a sudden drop in tire pressure (for example, a blowout while
driving). It also does not monitor the air pressure in the spare tire.
Tire pressure is affected by temperature. Low outside temperature
causes lower tire pressure. This may cause the low tire pressure
warning light to illuminate.
If the low tire pressure warning light comes on, check the tire pressure in all four tires.
Adjust the low tire pressure to the recommended COLD tire pressure shown on the Tire
and Loading Information label to turn the low tire pressure warning light off.
If TPMS is not functioning properly, the low tire pressure warning light will flash for
approximately 60 seconds when the key is turned on. After 60 seconds, the light will
remain on. Have the system checked by a NISSAN dealer.
A UTOMATI c clIMATE cONTRO l (if so equipped)
02
01
0708090306
AUTO BUTTON
Press the AUTO button 01. Turn the driver’s side temperature control dial 02
to the desired temperature. This will allow the fan speed, air flow distribution and
temperature to be automatically maintained.
Press the
DUAL 03 button
to turn the passenger’s side temperature controls on
or off. This will allow the passenger’s side temperature to be adjusted
independently from driver’s side control.
When AUTO is pressed, AUTO will be displayed. When DUAL is pressed, DUAL
will be displayed.
DRIVER’S SIDE TEMPERATURE CONTROL DIAL
Turn the driver’s temperature control dial left for cold air or right for hot air.
PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Turn the passenger’s temperature control dial left for cold air or right for hot air.
AIR FLOW/MODE BUTTONS
Press to select the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side, and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
Air flows mainly from the defroster vents.
FAN SPEED CONTROL BUTTONSPress (slower)
or (faster)
button repeatedly to manually control fan speed.
Press AUTO to automatically control fan speed. Press OFF to cancel fan speed
operation.
DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS Press the defroster control button to
turn the system on. The A/C
automatically turns on when the defroster mode is selected.
Turn the driver’s side temperature control dial left or right to set the desired temperature.
To set the defroster on high, press and hold until
fan speed increases.
DEFROSTING/DEFOGGING REAR WINDOW AND (if so equipped) OUTSIDE HEATED MIRROR
Push the rear window defroster switch on.
Push the switch again to manually
turn the defroster off. This function automatically turns off in approximately 15
minutes.
A/C ON/OFF BUTTON
Press the A/C button to manually turn the A/C on or off.
AIR RECIRCULATION BUTTON Press the air recirculation button to
recirculate air inside the vehicle.
Press the air recirculation button again
to turn air recirculation off.
The air recirculation mode cannot be selected if the air flow mode is selected.
05
04
09
08
07
06
03
02
01
WINDSHIE lD WIPER/
WASHER SWIT cHTIRE PRESSURE MONITORING SYSTEM HEADlIGHT AND TURN
SIGNAl SWIT cH
010203*See your Owner’s Manual for more information.
lIGHTS ON DEMAND cRUISE cONTROl
STEERING WHEE
l
SWIT cHES FOR
AUDIO cONTROl
040506
STEERING WHEE l
TI lT ADJUSTMENT*REAR SONAR SYSTEM
OFF SWIT cH
VEHI
clE DYNAMI c
cONTROl (VD c) OFF
SWIT cH*
070809
FRONT-PASSENGER
AIR BAG STATUS lIGHT
clIMATE
cONTROlS
cONTROl PANE
l
DISPlAY
101112
AUDIO cONTROlSHAZARD WARNING
FlASHER SWIT cH*
1314
cRUISE cONTRO l
To activate the cruise control, push the ON.OFF
switch. The indicator light in the instrument panel will
illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch and
release it. The SET indicator light in the instrument
panel will illuminate.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch. When the vehicle reaches the
speed you desire, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch. Release
the switch when the vehicle slows to the desired speed.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle
returns to the last set cruising speed when the vehicle speed is over 24 MPH (38
km/h).
To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SET
indicator light in the instrument panel will go out.
To turn off cruise control, push the ON.OFF switch. Both the CRUISE indicator light
and the SET indicator light in the instrument panel will go out.
FRONT-PASSENGER AIR BAG STATUS lIGHT
This vehicle is equipped with the Nissan Advanced Air
Bag system. Under some conditions, depending on
pressure detected on the passenger seat and how the
seat belt is used, the front-passenger air bag is designed
to automatically turn
OFF. When the front-passenger air
bag is OFF, the front-passenger air bag status light will
illuminate*. For example:
When the system detects that the front-passenger’s
seat is occupied by a small adult, child or child
restraint as outlined in the Owner’s Manual, the
will illuminate to indicate that the
front-passenger air bag is OFF and will not inflate in a crash.
When the front-passenger’s seat is occupied and the passenger meets the conditions
outlined in the Owner’s Manual, the
will not illuminate to indicate that the front-
passenger air bag is operational.
*When the system detects that the front-passenger’s seat is unoccupied, the passenger air bag status light will not illuminate even though the front-passenger air bag is OFF.
Refer to the Owner’s Manual for detailed information regarding the Nissan Advanced Air
Bag System
FRONT SEAT ADJUSTMENTS
With manual seats (if so equipped):
Pull up on the lever
01 under
the front of the seat
and slide backward or forward; release.
Lift the lever
02 on
the side of the seat to
adjust
your seatback backward or forward; release when
you have found a comfortable angle and the seat
belt fits properly.
Use the dials
03 at
the side of the driver’s seat to
adjust the angle and height of the seat cushion.
With power seats (if so equipped):
Move the control
04 forward
or backward to adjust
the seat cushion forward or backward.
Pull up to raise the driver’s seat cushion; press
down to lower the cushion.
04
Push the switch
05 forward
to move the seatback
forward; press it back to move the seatback
backward.
Your driver’s seat has a lumbar support; adjust it by
moving the lever
06 forward
or backward.
01
02
03
04
05
06
To move the 2nd row seats forward or backward:
Pull the lever
01 up
and hold it
while you slide the seat forward or backward to the
desired position.
Release the lever to lock the seat in position.
To recline the 2nd row seatbacks:
Pull the lever
02 up and
lean forward or back.
The 2nd row seats can be tipped forward for easy entry or exit from the 3rd row seat:
To enter the 3rd row seats, lift up on the lever
03 located
on the lower base of the
seat; this tips the seat forward.
To exit the 3rd row seats, pull back on the lever on the lower base of the seat and push
the seat forward.
To fold the 2nd row seats flat to the floor for maximum cargo hauling:
Lift up on the recline lever
04 to
fold the seatback down on the seat base.
Press down on the small lever
05 on
the back of the seat to
release the base of the seat.
Then fold the entire seat forward into the stowed position on the floor
06.
Reverse this process to return the 2nd row seats to a seating position. Make sure to
press the seats down to the floor until they latch into place.
ADJUSTING AND FO
lDING THE 2ND ROW SEAT
01
02
03
0605
04
To fold the 3rd row bench seat flat into the floor for maximum cargo hauling:
Disconnect and secure the center seat belt and tongue into the retractor base.
Pull the strap
01 on
the seatback to allow all three head restraints to fold forward.
Pull back on the pull strap
02 to
release the back of the seat and rotate the seatback
toward the back of the vehicle.
Pull up on the lever
03 located
on the back of the seat base. This will fold the seat
base toward the back of the vehicle.
The entire seat will rotate toward you and stow flat in the floor.
04
Reverse this process to return the bench seat to a seating position. Make sure to press
the bench seat down into the floor and pull back on the seatback until it latches into
place.
Return all three head restraints to the upright latched position.
FOlDING THE 3RD ROW SEAT
0102
03
04
04
05
0201
0104
02
05
03
10
11
1213
14
06
07
08
09
c HI lD SAFET Y RE AR DOOR lO cK
Child safety locks help prevent the sliding doors from
being opened accidentally, especially when small
children are in the vehicle. The child safety lock levers
are located on the edge of the sliding doors. When the
lever is in the
LOCK position, the door can be opened
only from the outside, with the overhead console switch
or the keyfob. A
DJUSTAB lE Acc ElERATOR AND BRAKE P EDAlS
(if so equipped)
Adjust the pedals when the automatic transmission lever is in Park.
Push
01 to
move the position of the pedals forward.
Push
02 to
move the position of the pedals backward.
01
02
FUE l-FI llER DOOR RE lEASE
Press the switch located on the driver’s door to open the
fuel-filler door.
Close the fuel-filler door securely to lock it.
The driver’s side power sliding door is disabled when the fuel-
filler door is open. The sliding door can be partially opened
manually.
SUNROOF cONTRO lS (if so equipped)
The ignition switch must be in the ON position to operate
the sunroof.
TILTING THE SUNROOF
To tilt the sunroof up, push the tilt switch toward the
UP 01 position.
To tilt the sunroof down, push the tilt switch toward the
DOWN 02 position.
SLIDING THE SUNROOF
To fully open the sunroof, push the switch toward the OPEN
03 position.
To fully close the sunroof, push the switch toward the CLOSE
04 position.
To open or close the sunroof part way, push the switch in either direction (
03 or 04)
while the sunroof is sliding to stop it in the desired position.
01
02
03
04
SEAT BE lT WARNING lIGHT AND cHIME
The light and chime remind you to fasten your seat belts. The
light illuminates whenever the ignition key is turned to the ON
or START position and remains illuminated until the driver’s
seat belt is fastened. At the same time, the chime sounds for
approximately 6 seconds unless the driver’s seat belt is
securely fastened.
The seat belt warning light may also illuminate if the front passenger’s seat belt is
not fastened when the front passenger’s seat is occupied. For 5 seconds after the
ignition switch is in the ON position, the system does not activate the warning light
for the front passenger.
Refer to the Owner’s Manual for detailed information regarding seat belt usage.
OUTSIDE MIRROR cONTRO l SWIT cH
Rotate the control switch to select the right or left mirror.
Adjust the mirror to the desired position by moving the control switch.
The selected mirror will automatically tilt down (if so equipped) when
the automatic transmission lever is moved to the R (Reverse) position.
The selected mirror will return to its original position when the automatic transmission
lever is moved to any position other than R (Reverse) or if the outside mirror switch is
moved to the neutral position.
REAR clIMATE cONTRO l DIA lS
To adjust the climate control system for rear seat
passengers, use the dials on the overhead console.
REAR FAN SPEED CONTROL DIAL
REAR TEMPERATURE CONTROL DIAL /REAR
CTRL BUTTON
Press the REAR CTRL button to transfer rear climate functions to the rear passengers.
02
01