NISSAN ROGUE 2013 2.G Quick Reference Guide

ouTSiDe Mi rror C o NT rol S wi TCH
To select the right or left side mirror, turn the control
switc

h right or left.
To adjust the mirror angle, move the control switch



up, down, right or left.
To prevent accidentally moving the mirror, turn and



set the switc
h to the middle “neutral” position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
STarT iNG/STo PP iN G THe eN GiNe (NiS S a N i ntelligent Key®
models only – if so equipped)
Depress the brake pedal.
Push the ignition switc h in.
Turn the ignition switch to STar T.
NOTE: It is important to make sure the NISSAN Intelligent
k

ey
® is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (ParK) position, apply
the parking brake and turn the ignition switch to the lo CK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
FolDiNG THe rear SeaTBaCK S Do w N
To fold the rear seatbacks down, pull up on the release lever
01
located on the outer edge of the seatbac
ks and fold the



seatbac

ks forward.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint
system (section 1)” of your Owner’s Manual.
9
01
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 912/21/12 10:30 AM

HeaDliGHT C o NT rol
HEADLIGHT
c
O

NTROL SWIT
cH
Turn the headlight control switch to the
position

01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. T urn the switch to the
position
02 to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is\
dark and off when it is



light. T
he system will keep the headlights on for a period of time after you tur\
n the ignition off



and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auTo position
03
t
hen turn the ignition switch to
o
N. To deactivate the autolight system, turn the headlight



control switc

h to the
o
FF,
01 or
position
02 .
HIGH BEAM SELE
cT
Push the headlight control switc h forward
04 to
select the high beam function. T
he blue indicator
light illuminates in the instrument panel. Pull the



headlight switc
h back to the original position to select



the low beam. T
he blue indicator light goes off.
Pull and release the headlight control switc h
05 to
flash the headlight high beams on and off.
FO
G LIGHT SWIT
cH (if so equipped)
N

OTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
o FF position to



turn the fog lights off.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
first drive features
10
04
05
06
01
03
02
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1012/21/12 10:30 AM

wiNDSHielD wi Per /w aSH er Sw iT CH
Move the lever to the following positions to operate



the windshield wipers:

01 Mist (MiST) - One sweep operation of the


front wipers.
02 Intermittent ( iNT) - Front wipers operate



intermittently
. The intermittent operation



speed can be adjusted by twisting the time



control ring
03 .
04 Low ( lo ) - Front wipers operate at a continuous


low-speed.
05 High (Hi ) - Front wipers operate at a continuous


high-speed.
06 Front Washer - Pull the lever toward you to



activate the front washer
. The front wipers will



operate several times.
RE

AR WINDSHIELD WIPER AND WASHER
07 Intermittent ( iNT) - Rear wiper operates


intermittently.
08 Low ( o N) - Rear wiper operates at a continuous


low-speed.
09 Rear Washer - Push the lever forward to
activate the rear washer . The rear wiper will



operate several times.
For more information, refer to the “instruments and controls (section 2)”
of your Owner ’s Manual.
11
03
01
02
04
05
MiST
o

FF
iNT
lo
H

i
06
09
iNT
o
N07
08
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1112/21/12 10:30 AM

first drive features
12
MaNual C liM aT e C o NT rol S (if so equipped)
01 FaN SP eeD C o NT rol Dial

Turn the fan speed control dial to the left (lo) or right (Hi ) to control fan speed.
02 TeM P eraT ure C o NT rol Dial

Turn the temperature control dial to set the desired temperature. Turn the control dial to the left for cooler air or right for warmer air.
03 air F low C o NT rol Dial

Turn the dial to select the following air flow outlets:



Air flows from center and side vents with maximum cooling (air condit\
ioning).



Air flows from the center and side vents.



Air flows from the center , side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.



Air flows mainly from the defroster vents.
04 DeF ro ST iN G/DeFo GGiN G F ro NT a ND SiDe wiN Do w S
Turn the air flow control dial to the front window defroster mode
. If it is difficult to defog
the windows, push the
a
/C button on. This feature removes humidity from the air.
Turn the temperature control dial left or right to set the desired temper\
ature.
To set the defroster on high, turn both the fan speed dial 01 and the temperature control
dial 02 all the way to the right.
05 DeF ro ST iN G rear wiN Do w

Push the rear window defroster switc h. Push the switch again to manually turn the
defroster off. This function automatically turns off in approximately 15 minutes.
06 a /C o N/ o FF Bu TTo N
Press the a
/C button to turn the air conditioner system on or off. This system helps cool
and dehumidify the air inside the cabin and defog the windows.
07 air reC irC ulaT io N Bu TTo N
The air recirculation button is used to avoid outside odors.
Press the air recirculation button
once to turn on and press again to turn off.
The air recirculation mode is only functional when the air flow control\
dial is in the

or
position.For more information, refer to the “instruments and controls (section 2)” and the “Center display, heater, air conditioner,
audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
010302
05040607
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1212/21/12 10:30 AM

FM/aM/SiriusXM™* SaTelli T e ra Di o wi TH CD P laY er
(if so equipped)
01 V OL/ON•OFF CONTROL KNOB
Press the
VOL/ON•OFF control knob to turn the system on or off.
Turn the VOL/ON•OFF control knob to the right or left to increase or decrease the volume.
02 TuNe/ SC roll /a uDi o KNo B

To manually tune the radio, turn the T uNe/ SC roll /a uDi o knob left or right.
03 SeeK/CaT eGorY Bu TTo NS
To scan through each broadcasting station, press the Se eK/CaT eGorY buttons.
To skip from one track to another on a cD, press the Se eK/CaT eGorY buttons.
When the SeeK/CaT eGorY buttons are pressed and held while a cD is playing, the cD



w
ill rewind or fast forward. When the button is released, the c
D will play at normal speed.
04 STaTio N Se leC T Bu TTo NS
Twelve stations can be set for the FM band, six for the AM band and eighteen for



SiriusX
M™ satellite radio.
To store a station in a preset you must first select a radio band by pressing the FM•AM button



05 or XM button
06 , then tune to the desired AM, FM or SiriusX M satellite radio station.
Then press and hold the desired station select button (1 -6 ) until a beep is heard and the



sound is briefly muted. T
he channel indicator will appear on the display and the sound will



r
esume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored



then press the corresponding st
ation select button (1-6 ).
*SiriusXM™ Satellite Radio is only available on vehicles equipped with optional Siri\
usXM™ satellite subscription service.
For more information, refer to the “Center display, heater, air conditioner, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
01
03
0506
02
04
13To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1312/21/12 10:30 AM

CruiSe C o NT rol
The cruise control system enables you to set a constant



cruising speed once the vehicle has reac
hed 25 mph.



T
he system will automatically maintain the set speed



until you t
ap the brake pedal, accelerate, cancel or



turn the system off.

To activate the cruise control, push the ON•OFF
switc

h
01 . The Crui S e indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the



desired speed, push the
C oa ST/S
e
T switch
02
and release. T
he Se
T indicator light in the instrument panel will illuminate. Take your foot off



the accelerator pedal. Y

our vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the aC Cel/ re S switch
03 .
When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the C oa ST/Se T switch
02 .
Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the Ca NC el switch
04 .
To turn off cruise control, push the ON•OFF switch 01 . Both the Crui S e indicator light
and Se
T indicator light, in the instrument panel, will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
02
01
04
Fuel-Filler Door
The fuel-filler door is located on the right, rear side of



the vehicle.
To open the fuel-filler door, pull the left side of the door.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
14
first drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1412/21/12 10:30 AM

TriP Co MP u T er
With the ignition switch in the o N position, trip
computer
01 modes can be selected by pressing the



control c

hange button
02 on the instrument panel.
The following modes can be selected in the display:



•

F
uel e conomy – displays the current and average



fuel consumption.




•
a
verage Speed

– displays the average vehicle



speed since the last reset.




•

Driving Distance
– displays the distance driven since the last reset.



•
e
lapsed Time – displays the time since the last reset.



•
r
ange – displays the estimated distance to empty (dte) the vehicle can be driven



before refueling.




•

Settings
– This menu allows you to set the clock, preferences for alerts, maintenance intervals



or language displays. T
urn the control change button
02 to select or adjust menu items



a

nd press the button to set.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
02
01
Blue TooTH® HaNDS-Free PHo Ne SYST eM (if so equipped)
With an overhead microphone and sound



t
ransmitted through the audio system speakers,



the Bluetooth® Hands-free Phone System utilizes



Bluetooth wireless tec
hnology and voice recognition



to provide hands-free cellular phone communication.
A cellular telephone should not be used while driving



so full attention may be given to vehicle operation.
*
SYSTEM OPERATING TIPS
Reduce background noise as much as possible by



closing windows and pointing HV
A
c
vents away from



the ceiling.
Press the
button on the steering wheel to activate
voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
Speak in a clear and natural voice without pausing



between words.
Look straight ahead and avoid speaking too loudly or too softly .
To go back to the previous command, say “Go back” or “ c orrection.”
15
system guide
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1512/21/12 10:30 AM

To cancel a voice recognition session, simply wait 5 seconds, say “c ancel” or “Quit,” or press



and hold the button for 5 seconds.
To interrupt the system voice and give a command quickly, press the
button.

When speaking Phonebook names, please be aware some phones require the la\
st name to be



spoken before the first name. F
or example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume \
control switches
or
on the steering wheel or turn the VOL/ON•OFF control knob on the audio

system while the system is responding.
If the Voice Recognition system does not recognize your voice commands, train th\
e system



using the Speaker Adapt
ation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands\
at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information



regarding your Bluetooth phone.
For recommended phones and detailed instructions, please visit
www

.nissanusa.com/bluetooth.
cONNEcTING PRO c EDURE
NOTE: The vehicle must be stationary when connecting the phone.
1.

Press the
button on the steering wheel. The system announces the available commands.

2.


S

ay: “
c
onnect phone”. The system acknowledges the command and announces the next set



of available commands.
3.


S

ay: “Add phone”. The system acknowledges the command and asks you to initiate connecting



from the phone handset.
4.


Initiate connecting from the phone:
The connecting procedure varies according to each cellular phone model. For detailed



connecting instructions and compatible phones, please visit




www
.nissanusa.com/bluetooth.
When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code is



assigned by N
ISSAN and cannot be changed.)
5.


S
ay a name for the phone when the system asks you to provide one. You can give the phone



a name of your c
hoice.
PHONEBOOk SE TUP
Depending on your cell phone, the system may automatically download your\
cell phone’ s



entire phonebook to the vehicle’
s Bluetooth system.
If the phonebook does not download automatically , 40 entries can be individually downloaded.
system guide
16To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1612/21/12 10:30 AM

17
To manually download entries:



1.

Push the button on the steering wheel.




2.


After the tone, s
ay “Phonebook”.



3.


After the next tone, s
ay “Transfer Entry”. The system acknowledges the command and



asks you to initiate the transfer from the phone handset. T
he new contact phone number



will be transferred from the cellular phone to the vehicle.
The transfer procedure varies according to each cellular phone. See your cellular phone’s



owner
’s manual for details. You can also visit www.nissanusa.com/bluetooth for



instructions on transferring phone numbers from N
ISSAN recommended cellular phones.



4.

T
he system repeats the number and prompts you for the next command. When you have



finished entering numbers or transferring an entry
, choose “Store.”



5.

T
he system confirms the name, location and number.
MAkING A cALL F ROM THE PHONEBOOk
1. Press the
button.

2.


After waiting for the tone, s
ay “ c all”.
3.


After the next tone, speak a name of a phonebook entry
. For example “Michael Smith”.
4.

c
onfirm the correct name is recognized by saying “Dial” after the tone.
NOTE: Names stored in all UPPER
cA

SE letters may not be recognized correctly by the voice
recognition system.
MAkING A cALL B Y PHONE NUMBER
1. Press the
button. A tone will sound.
2.


S

ay: “
c
all”. The system acknowledges the command and announces the next set of



available commands.

3.


S

ay: “Phone Number”. The system acknowledges the command and announces the next



set of available commands.

4.


S

ay the number you wish to call starting with the area code in single digit format.
5.


W

hen you have finished speaking the phone number, the system repeats it back and



announces the available commands.

6.


S

ay: “Dial”. The system acknowledges the command and makes the call.
REcEIVING/ENDING A cA LL
When you receive a phone call, a ring tone sounds through the audio syste\
m.
To accept the call, press the
button. To reject the call, press the button.
To hang up the phone at the end of a call or to disconnect during call pl\
acement, press
the button.
For more information, refer to the “Center display, heater, air conditioner, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1276461_13c_Rogue_QRG_122112.indd 1712/21/12 10:30 AM

Nissan, the Nissan Brand Symbol, Z and
Nissan model names are Nissan trademarks.
©
2 0 13 Nissan North America, Inc.
QR3E 0S35U2
Printing: February 2013 (15)
To view detailed instructional videos,
go to www.nissanownersinfo.mobi/2013/rogue
or snap this barcode with an appropriate barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the uniq\
ue features of your new vehicle. See your
Owner’s Manual, which contains important safety warnings and information about the operation and maintenance of yo\
ur vehicle,
for complete details. Nissan North America, Inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discon\
tinue models or equipment. Due to continuous product
development and other pre- and post-production factors, actual vehicle, \
materials and specifications may vary. Some vehicles are
shown with optional equipment. See the actual vehicle for complete accur\
acy. Specifications, options and accessories may differ
in Hawaii, U.S. territories and other countries. For additional information on availability, options or accessories, see your NISSAN
dealer or contact Nissan North America, Inc.
1276461_13c_Rogue_QRG_122112.indd 212/21/12 10:30 AM