headlights NISSAN ROGUE SELECT 2015 2.G Quick Reference Guide

6
LIFTGATE RELEASE
To open the liftgate, unlock the liftgate using one
of the following methods:
• Press the
button 1 on the key fob twice.
• Push the power door lock switch to the
unlock position.
• Insert the key into the driver’s door key cylinder
and turn it toward the rear of the vehicle twice.

Then push the liftgate release switch 2 just
above the license plate and pull the liftgate up.
For more information, refer to the “Pre-driving checks and
adjustments (section 3)” of your Owner’s Manual.
1
REMOTE KEYLESS ENTRY SYSTEM
To lock the vehicle, press the button 1 on
the key fob.

To unlock the vehicle, perform the
following procedures:
• Press the

button 2 on the key fob to unlock

the driver’s side door.
• Press the
button 2 again within 5 seconds;
all other doors and the liftgate will unlock.

The key fob can also be used to activate the panic
alarm by pressing and holding the
button 3

for more than 1 second. Once activated, the
panic alarm and headlights will stay on for a
period of time.
For more information, refer to the “Pre-driving checks and
adjustments (section 3)” of your Owner’s Manual.
1
3
2
FIRST DRIVE FEATURES
2
1706218_15a_Rogue_Select_QRG_111814.indd 611/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

8
HEADLIGHT CONTROL
HEADLIGHT CONTROL SWITCH

Turn the headlight control switch to the

position
1 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position
2 to
turn on the headlights.
HIGH BEAM SELECT

Push the headlight control switch forward
3 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the headlight switch back to the original
position to select the low beam. The blue indicator light will extinguish.

Pull and release the headlight control switch
4 to flash the headlight high beams on
and off.
LANE CHANGE SIGNAL

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch to signal a lane change. Hold the lever until the lane change is completed.

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch and release the lever. The turn signal will automatically flash 3 times.

Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FIRST DRIVE FEATURES
34
1
2
STARTING/STOPPING THE ENGINE
Depress the brake pedal.

Move the shift lever to the P (PARK) position or
N (NEUTRAL) position.

Turn the ignition switch to START.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position, apply the parking brake and turn the
ignition switch to the LOCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1706218_15a_Rogue_Select_QRG_111814.indd 811/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.