parking brake NISSAN ROGUE SELECT 2015 2.G Quick Reference Guide

8
HEADLIGHT CONTROL
HEADLIGHT CONTROL SWITCH

Turn the headlight control switch to the

position
1 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position
2 to
turn on the headlights.
HIGH BEAM SELECT

Push the headlight control switch forward
3 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the headlight switch back to the original
position to select the low beam. The blue indicator light will extinguish.

Pull and release the headlight control switch
4 to flash the headlight high beams on
and off.
LANE CHANGE SIGNAL

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch to signal a lane change. Hold the lever until the lane change is completed.

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch and release the lever. The turn signal will automatically flash 3 times.

Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FIRST DRIVE FEATURES
34
1
2
STARTING/STOPPING THE ENGINE
Depress the brake pedal.

Move the shift lever to the P (PARK) position or
N (NEUTRAL) position.

Turn the ignition switch to START.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position, apply the parking brake and turn the
ignition switch to the LOCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1706218_15a_Rogue_Select_QRG_111814.indd 811/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.