display NISSAN ROGUE SPORT 2017 Owners Manual

played will come on.
While the radio is in SXM mode, the
operation can be controlled through the
touch screen. Touch the “Channels” key to
display a list of channels. Touch a channel
displayed on the list to change to that
channel. Touch the “Categories” key to
display a list of categories. Touch a
category displayed on the list to display
options within that category.
Tuning with the touch screen:
When in AM or FM mode, the radio can be
tuned using the touch screen. To bring up
the visual tuner, touch the “Tune” key on
the lower right corner of the screen. A
screen appears with a bar running from
low frequencies on the left to high
frequencies on the right. Touch the
screen at the location of the frequency
you wish to tune and the station will
change to that frequency. To return to
the regular radio screen, touch the “OK”
key.
Tuning with the ENTER AUDIO/TU-
NE·SCROLL dial:
The radio can also be manually tuned
using the ENTER AUDIO/TUNE·SCROLL
dial. When in FM or AM mode, turn the
ENTER AUDIO/TUNE·SCROLL dial to the
left for lower frequencies or to the right
for higher frequencies. When in SXMmode, turn the ENTER AUDIO/TUNE·SC-
ROLL dial to change the channel.
SEEK tuning:
When in FM or AM mode, push the
orbutton to tune from low to high or
high to low frequencies and to stop at the
next broadcasting station.
When in SXM mode, push the
orbutton to change the category.
JVH0741X
1 to 6 station or channel memory
operations:
Twelve stations can be set for the FM
band (6 for FM1, 6 for FM2) and six stations
can be set for the AM band. Eighteen
channels can be set for the SXM band (6
for SXM1, 6 for SXM2, 6 for SXM3).
1. Choose the radio band AM, FM1 or FM2 using the FM·AM button or choose the
radio band SXM1, SXM2, SXM3 using
the SXM button.
2. Tune to the desired station or channel using manual or seek tuning. Touch
and hold any of the desired station or
channel memory keys (1 – 6) until a
beep sound is heard. The station or
Heater, air conditioner, audio and phone systems4-65

JVH1619X
Replay screen
The Replay Screen gives the user the
ability to replay, skip, pause or rewind
the currently aired broadcast.
When the “Replay” key is touched, the
Replay Screen is prompted.
To replay a track from the beginning,
touch the “
” key. The user can con-
tinue to touch the “” key to replay
previous songs, but can only go back as
far as the system permits. The system will
warn the user when they cannot skip any
further back by displaying “At the End” in
the bottom left corner of the screen.
To skip a track, touch the “
” key. “Live”
will appear in the bottom left corner of the screen indicating the difference from
play time to live audio.
To rewind/fast forward a track, touch and
hold the “
”or“” key.
To pause a track, touch the “
” key.
Compact Disc (CD) player operation
Insert a CD into the slot with the label side
facing up. The CD will be guided auto-
matically into the slot and will start
playing. If the radio is already operating,
it automatically turns off and the Com-
pact Disc (CD) begins to play.
PLAY:
When the CD button is pushed with the
system off and the CD loaded, the system
will turn on and the CD will start to play.
When the CD button is pushed with a CD
loaded and the radio playing, the radio
will automatically be turned off and the
CD will start to play.
Heater, air conditioner, audio and phone systems4-67

4-68Heater, air conditioner, audio and phone systems
CD/MP3/WMA display mode:
While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD
encoded with text is being used). Depending on how the CD or MP3/WMA CD is
encoded, the text is displayed listing the artist, album and song title. There are other
keys displayed on the screen when a CD is playing.
Menu item
CD/MP3
display
mode Random
Touch the “Random” key to apply a random play pattern to the CD. If
an MP3 CD is playing, touching “Random” or alternates between
Random Folder, and Random All. This text will appear on the display.
To cancel Random mode, touch the “Random” key until the key is no
longer highlighted.
Repeat Touch the “Repeat” key to apply a repeat play pattern to the CD. If an
MP3 CD is playing, touching “Repeat” alternates between repeating the
current song and repeating the current folder. This text will appear on
the display. To cancel Repeat mode, touch the “Repeat” key until the
key is no longer highlighted.
Browse Touch the “Browse” key to display the titles on the CD in list format.
Touch the title of a song in the list to begin playing that song. If an MP3
CD is playing, touching the “Browse” key will also list the folders on the
disc. Follow the procedure for selecting a song with the screen to
choose a folder.
SEEK TRACK:
Push and hold the
orbutton
while the CD is playing to rewind or fast
forward the track being played.
Push the
button while a CD or MP3/
WMA CD is playing to return to the
beginning of the current track. Push the
button several times to skip back-
ward several tracks. Push thebutton
while a CD or MP3/WMA CD is playing to
advance one track. Push the
button
several times to skip forward several
tracks. If the last track on a CD is skipped,
the first track on the disc is played. If the
last track in a folder of an MP3/WMA CD is
skipped, the first track of the next folder is
played.
CD eject:
When the
button is pushed with a CD
loaded, the CD will eject and the last
source will be played.
If the disc is not removed within 10
seconds, the disc will reload.

USB memory player operation
Connecting a device to the USB con-
nection port:
The USB connection port is located on
the lower part of the instrument panel.
Insert the USB memory into the port. (See
“USB (Universal Serial Bus) connection
port” (P.4-74).)
When a compatible storage device is
plugged into the port, compatible audio
files on the storage device can be played
through the vehicle’s audio system.
Audio file operation:
AUX button:
Place the ignition switch in the ACC or ON
position and push the AUX button to
switch to the USB memory input mode.
If another audio source is playing and a
USB memory is inserted, pushing the AUX
button repeatedly will change the system
to the USB memory mode.
If the system has been turned off while
the USB memory was playing, push the
POWER/VOLUME dial to restart the USB
memory.
JVH1685X
Play information:
Information about the audio files being
played is shown on the screen of the
vehicle’s audio system. Touch “Browse” to
display the list of categories that can be
used to narrow the search. Touch the
name of a song on the screen to begin
playing that song.
Seek button:
Push the
button while an audio file on
the USB memory is playing to return to
the beginning of the current track. Push
the
button several times to skip
backward several tracks.
Push the
button while an audio file on the USB memory is playing to advance
one track. Push the
button several
times to skip forward several tracks. If the
last track in a folder on the USB memory
is skipped, the first track of the next folder
is played.
Random and repeat play mode:
While files on a USB memory are playing,
the play pattern can be altered so that
songs are repeated or played randomly.
. Random:
Touch the “Random” key to apply a
random play pattern to the USB
memory. To cancel Random mode,
touch the “Random” key again.
. Repeat:
Touch the “Repeat” key to apply a
repeat play pattern to the USB mem-
ory. To cancel Repeat mode, touch the
“Repeat” key again.
Heater, air conditioner, audio and phone systems4-69

4-72Heater, air conditioner, audio and phone systems
played. The track plays at an increased
speed while rewinding or fast forwarding.
When the button is released, the track
returns to normal play speed.
JVH0748X
Scrolling menus:
While navigating long lists of artists,
albums or songs in the music menu, it is
possible to scroll the list by the first
character in the name. To activate char-
acter indexing, touch the “A-Z” key in the
upper right corner of the screen. Turn the
ENTER AUDIO/TUNE·SCROLL dial to
choose the number or letter to jump to
in the list and then push the ENTER
AUDIO/TUNE·SCROLL dial.
If no character is selected after a few
seconds, the display returns to normal.
Bluetooth® streaming audio
If you have a compatible Bluetooth®
audio device that is capable of playing
audio files, the device can be connected
to the vehicle’s audio system so that the
audio files on the device play through the
vehicle’s speakers.
Regulatory information:
Bluetooth® trademark:
Bluetooth® is a trademark
owned by Bluetooth SIG, Inc.
and licensed to Robert
Bosch GmbH.

JVH1583X
Example
Connecting Bluetooth® audio:
To connect your Bluetooth® audio device
to the vehicle, follow the procedure be-
low:
1. Push the APPS·i button.
2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
JVH0750X
4. Touch the “Connect New Device” key.
5. The system acknowledges the com-mand and asks you to initiate con-
necting from the phone handset. The
connecting procedure of the cellular
phone varies according to each cellu-
lar phone model. See the cellular
phone owner’s manual for details.
You can also visit www.nissanusa.
com/bluetooth or www.nissan.ca/
bluetooth for instructions on connect-
ing NISSAN recommended cellular
phones.
Audio main operation:
To switch to the Bluetooth® audio mode,
push the AUX button repeatedly until the Bluetooth® audio mode is displayed on
the screen.
The controls for the Bluetooth® audio are
displayed on the screen.
AUX device player operation
The AUX input jack is located on the lower
part of the instrument panel. (See “AUX
(Auxiliary) input jack” (P.4-75).) The AUX
input jack accepts any standard analog
audio input such as from a portable
cassette tape/CD player, MP3 player or a
laptop computer. Push the AUX button to
play a compatible device plugged into the
AUX input jack.
NISSAN strongly recommends using a
stereo mini plug cable when connecting
your music device to the audio system.
Music may not play properly when a
monaural cable is used.
Heater, air conditioner, audio and phone systems4-73

JVH0684X
AUX (Auxiliary) INPUT JACK
The AUX input jack is located on the lower
part of the instrument panel. The AUX
input jack accepts any standard analog
audio input such as from a portable
cassette tape/CD player, MP3 player or
laptop computer.
JVH1655X
1. Menu control buttons/OK button
2. Volume control buttons
3. Tuning buttons
4. Back button
STEERING WHEEL SWITCH FOR
AUDIO CONTROL
The audio system can be operated using
the controls on the steering wheel.
Menu control buttons/OK button
Push the/buttons to switch the
vehicle information display to audio
mode. Push the OK button until the
preferred available audio source is se-
lected.
Volume control buttons
Push the + or − button to increase or
decrease the volume.
Tuning buttons (models
without navigation system)
Availability of functions may vary depend-
ing on the media and device.
AM and FM radio:
. Push the
/button for less than
1.5 seconds to select the next or the
previous preset station.
. Push the
/button for more
than 1.5 seconds to seek up or down
to the next station.
SXM operation (if so equipped):
. Push the
/button for less than
1.5 seconds to select the next or the
previous preset channel.
. Push the
/button for more
than 1.5 seconds to select the next or
the previous available channel.
iPod®:
. Push the
/button for less than
1.5 seconds to select the next or the
previous track.
Heater, air conditioner, audio and phone systems4-75

4-78Heater, air conditioner, audio and phone systems
This vehicle is equipped with smartphone
Integration technology. This allows many
compatible smartphone applications to
be displayed and easily controlled
through the vehicle’s touch screen.
NOTE:
A compatible smartphone and registra-
tion is required to use mobile applica-
tions or to access connected features of
certain vehicle applications.
REGISTERING WITH NISSANCON-
NECTSMMOBILE APPS
To use the smartphone Integration fea-
ture, it is necessary for the user to
register. In order to register, visit the
NissanConnect
SMwebsite and sign up or
create an account through the prompts
on the NissanConnect
SMMobile Apps.
Once registered, download the Nissan-
Connect
SMMobile Apps from your com-
patible phone’s application download
source and then log into the application.
If you already have an account created
through the App, please log in.
NissanConnect
SMwebsite:
For U.S.
www.nissanusa.com/connect/
For Canada
www.nissan.ca/nissanconnect (English)
www.nissan.ca/nissanconnect/fr (French)
CONNECT PHONE
To use this feature, a compatible smart-
phone must be connected via Bluetooth®
or USB connection port to the vehicle. For
more information on connecting your
phone, see “Bluetooth® Hands-Free
Phone System (models with navigation
system)” (P.4-93).
NOTE:
.
For iPhone®, NissanConnect
SMMo-
bile Apps REQUIRES the phone to be
plugged in via USB connection port.
. For Android phones, NissanCon-
nect
SMMobile Apps REQUIRES the
phone to be paired via Bluetooth®.
APPLICATION DOWNLOAD
Once connected, the NissanConnectSM
Mobile Apps will search your phone to
determine which compatible applications
are currently installed. The user will then
choose which apps they want to bring
into their vehicle from the list of apps
within the “Manage My Apps” section of
the NissanConnect
SMMobile Apps on
their smartphone. The vehicle will then
download the in-vehicle interface for
each of these compatible applications.
Once downloaded, the user can access
their selected smartphone applications
through the vehicle touch screen. For more information on application avail-
ability see NissanConnect
SMwebsite.
NissanConnectSMwebsite:
For U.S.
www.nissanusa.com/connect/
For Canada
www.nissan.ca/nissanconnect (English)
www.nissan.ca/nissanconnect/fr
(French)
NISSANCONNECTSMMOBILE APPS
SMARTPHONE INTEGRATION (if so
equipped)

4-80Heater, air conditioner, audio and phone systems
JVH1592X
SIRI® EYES FREE ACTIVATION
Siri® Eyes Free function can be activated
using thebutton on the steering
wheel.
1. Connect a Siri® Eyes Free enabled
iPhone® to the vehicle. (See “Connect-
ing procedure” (P.4-96) or “Initializa-
tion” (P.4-86).)
2. After the Bluetooth® connection is established, push and hold the
button to activate the Siri® Eyes Free
function.
Depending on the model, Siri® Eyes
Free activation option (“Short Press” or
“Long Press”) can be selected after
connecting the iPhone®. The activa- tion option can also be changed from
the Phone or Bluetooth® settings
menu. (See “Changing Siri® Eyes Free
Settings (models with navigation sys-
tem)” (P.4-80) or “Changing Siri® Eyes
Free Settings (models without naviga-
tion system)” (P.4-81).)
OPERATING SIRI® EYES FREE
1. Push or push and hold thebutton.
2. Speak your command and then listen to the Siri® Eyes Free reply.
After starting Siri® Eyes Free, push the
button again within five seconds of the
end of the Siri® Eyes Free announcement
to extend the session.
Example 1 - Playing music
1. Push or push and hold the
button.
2. Say “Play (artist name, song name, etc.)”.
3. Your vehicle will automatically change to Bluetooth® audio or iPod® mode*
when the music starts playing. Mode
selection is determined by the phone.
*: If the iPhone® is also connected with
the USB cable.
If the audio track does not start playing
automatically after Siri® Eyes Free ends,
try changing the track or audio source to
resume playback. NOTE:
For best results, use the native music
app. Performance of music control
function while using Podcasts, Audio-
book or other third party music apps
may vary and is controlled by the
iPhone®.
Example 2 - Replying to text messages
1. If a compatible iPhone® is connected
and “Show Notifications” of the
iPhone® settings is enabled, the vehi-
cle will display a notification for new
incoming text messages.
2. After reading the message, push or push and hold the
button to reply
using Siri® Eyes Free.
3. After a beep sounds, say “Text mes- sage” or a similar command to reply
using Siri® Eyes Free.
CHANGING SIRI® EYES FREE SET-
TINGS (models with navigation
system)
Settings for Siri® Eyes Free can be found
in the Bluetooth® settings menu.
1. Push the APPS·i button.
2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Phone settings” key.

4-88Heater, air conditioner, audio and phone systems
.(A Name)
Say a name in the phonebook to bring
up a list of options for that phonebook
entry. The system will say the name it
interpreted based on the voice com-
mand provided. If the name is incor-
rect, say “Correction” to hear another
name.
Once the correct phonebook entry is
identified, say “Dial” to dial the number
or “Send Text” to send a text message
to that number. Say “Record Name” to
record a name for the phonebook
entry. Say “Delete Recording” to delete
a recorded name for the phonebook
entry.
. List Names
Speak this command to have the
system list the names in the phone-
book one by one alphabetically. Say
“Dial” to dial the number of the current
name or “Send Text” to send a text
message to that number. Say “Next
Entry” or “Previous Entry” to move
through the list alphabetically. Say
“Record Name” to record a name for
the current phonebook entry. Say
“Delete Recording” to delete a re-
corded name for the current phone-
book entry.
. Transfer Entry
This command can be used to trans- fer multiple contacts at a time. To
enable manual contact transfer cap-
ability, set “Phonebook Download” to
“Off” in the Setting menu. The ability to
transfer contacts via the OPP Blue-
tooth® profile depends on your mobile
phone. For additional information, re-
fer to your phone’s owner’s manual.
. Delete Entry
Speak this command to delete an
entry in the phonebook. Choose an
entry to delete by speaking the de-
sired name or say “List Names”.
Recent Calls:
The following commands are available
under “Recent Calls”:
. Incoming Calls
Speak this command to list the last
five incoming calls to the vehicle. If the
call is from an entry in the phonebook,
the name will be displayed. Otherwise,
the phone number of the incoming
call will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
incoming calls.
. Missed Calls
Speak this command to list the last
five missed calls to the vehicle. If the call is from an entry in the phonebook,
the name will be displayed. Otherwise,
the phone number of the missed call
will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
missed calls.
. Outgoing Calls
Speak this command to list the last
five outgoing calls from the vehicle. If
the call was to an entry in the phone-
book, the name will be displayed.
Otherwise, the phone number of the
outgoing call will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
outgoing calls.
. Redial
Speak this command to call the last
number dialed.
. Call Back
Speak this command to call the num-
ber of the last incoming call to the
vehicle.
Messaging (if so equipped):
Speak this command to access text
messaging functions. For more informa-