trip computer NISSAN SENTRA 2013 B17 / 7.G Quick Reference Guide

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
looSe F uel Ca P
A looSe F uel Ca P warning message will display



in the trip computer 01 when the fuel-filler cap is not

tightened correctly
.
To tighten, turn the cap clockwise until a single click



is heard.
The warning message will disappear when the vehicle



detects the fuel-filler cap is properly tightened and the

button 02 on the steering wheel
is pressed.
If the cap is not properly tightened, the Malfunction




Indicator Light may also illuminate.
For more information, refer to the “instruments and controls (section 2)”

and the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Tire PreS Su re Mo Ni Tor iN G SYST eM (TPM S) W i TH
ea

SY F ill T ire aler T (if so equipped)
A CHeCK… T ire … P reS… warning message
will appear in the trip computer
01 and the low tire

pressure warning light 02 will illuminate when one

or more tires are low on pressure and air is needed.



•


T

he tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mi (1.6 km) at moderate speeds.
After tire pressures are adjusted, drive the vehicle at



speeds above 1
6 MPH (25 km/h). The CH
eCK T

ire

Pre

S warning message and low tire pressure



warning light will dis
appear.
When adding air to an under-inflated tire, the TPMS with Easy Fill Tire Alert provides visual

and audible signals to help you inflate the tires to the recommended
c
O
LD tire pressure.
To use the Easy Fill Tire Alert system (if so equipped):



1. Move the shift lever to the
P (P
arK)
position and apply the parking brake.



2. Place the ignition switc
h in the o N position. Do not start the engine.



3.

Add air to the under-inflated tire and within a few seconds, the hazar\
d warning lights will

start flashing.



4.

W
hen the designated tire pressure is reached, the horn will beep once and the hazard
warning lights will stop flashing.



5. Repeat this procedure for any additional under-inflated tires.
essential information
02
01
CHeCK T ire P reS
02
3

system guide
11
BlueTooTH® HaNDS-Free PHo Ne SYST eM (if so equipped)
With an overhead microphone and sound



t
ransmitted through the audio system speakers,



the Bluetooth® Hands-free Phone System utilizes
Bluetooth® wireless technology and voice recognition



to provide hands-free cellular phone communication.
A cellular telephone should not be used while driving



so full attention may be given to vehicle operation.
*
SYSTEM OPERATING TIPS
close all windows. Surrounding noises may interfere
with system operation and performance.
Press the button on the steering wheel to activate
voice recognition.
Wait until after the tone sounds and the face
icon on the display changes before speaking
a command.
Begin speaking a command within 3.5 seconds of the tone.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
13
TriP CoMP u T er
With the ignition switch in the o N position, trip
computer modes
can be selected by pressing the

button
02 on the steering wheel.
The following modes can be selected in the display 01:



•


Odometer – records the tot

al distance the vehicle
has been driven.
•


T

rip
a
– measures the distance of one specific trip.
•


T

rip B – measures the distance of a second
specific trip.
•

e
C

o
Pedal
i
ndicator – displays the
recommended accelerator pedal position
to optimize fuel consumption.
•


M

PG – displays the instant fuel consumption.
•

av
G

/mpg – displays the average fuel consumption since the last reset.
•

av
G

/mph – displays the average vehicle speed since the last reset.
•


dte –


displays the estimated dist

ance to empty (dte) the vehicle can be driven before refueling.
To reset Trip a , Trip B, a vG /mpg, or avG /mph, go to the desired mode on the trip computer
and hold the
button 02 for more than 3 seconds.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
01
02