service NISSAN TEANA 2014 Service Manual

WT-56
< REMOVAL AND INSTALLATION >
ROAD WHEEL TIRE ASSEMBLY
4. If calculated balance weight value exceeds 50 g (1.76 oz), installtwo balance weight sheets in line with each other as shown.
CAUTION:
Do not install one balance weight sheet on top another.
5. Start balancer machine again.
6. Install balance weight on inner side of road wheel in the bal- ancer machine indication position (angle).
CAUTION:
Do not install more than two balance weights.
7. Start balancer machine. Make sure that inner and outer residual imbalance values are 5 g (0.17 oz) each or below.
8. If either residual imbalance value exceeds 5 g (0.17 oz), repeat installation procedures.
TIRE ROTATION
• Follow the maintenance schedule for tire rotation service intervals.
Refer to MA-5, "FOR USA AND CANADA : Explanation of General
Maintenance".
• When installing the wheel, tighten wheel nuts to the specified torque.
CAUTION:
• Do not include the T-type spare tire when rotating the tires.
• When installing wheels, tighten them diagonally by dividing
the work two to three times in order to prevent the wheels
from developing any distortion.
• Be careful not to tighten wheel nut at torque exceeding the criteria for preventing strain of disc rotor.
• Use NISSAN genuine wheel nuts for aluminum wheels.
• Perform the ID registration, after tire rotation. Refer to WT-25, "Work Procedure"
.
Wheel balance Dynamic (At flange) Static (At flange)
Maximum allowable im-
balance Refer to
WT-60, "Road Wheel"
.
PEIA0033E
Wheel nut tightening
torque : 113 N·m (12 kg-m, 83 ft-lb)
SMA829C
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM

WT-60
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Road WheelINFOID:0000000009464525
TireINFOID:0000000009464526
Unit: kPa (kg/cm2, psi)
Standard itemAllowable value
Aluminum Steel Inside Outside
Radial runout Lateral deflection Less than 0.3 mm (0.012 in)
Less than 0.8 mm
(0.031 in) Less than 0.4 mm
(0.016 in)
Radial deflection Less than 0.3 mm (0.012 in) Less than 1.0 mm
(0.039 in) Less than 0.9 mm
(0.035 in)
Allowable imbalance Dynamic
(At rim flange) Less than 5 g (0.18 oz) (one side)
Stati c
(At rim flange) Less than 10 g (0.35 oz)
Wheel nut tightening
torque 113 N·m (12 kg-m, 83 ft-lb)
Tire size Air pressure
Front tire Rear tire
215/60R16 220 (2.2, 32) 220 (2.2, 32)
215/55R17 230 (2.3, 33) 230 (2.3, 33)
235/45R18 230 (2.3, 33) 230 (2.3, 33)
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM

WW-2
FRONT WIPER DOES NOT OPERATE ............48
Description ........................................................... ...48
Diagnosis Procedure ..............................................48
NORMAL OPERATING CONDITION ................50
Description ........................................................... ...50
REMOVAL AND INSTALLATION ...............51
WASHER TANK ............................................. ...51
Exploded View ..................................................... ...51
Removal and Installation ........................................51
WASHER PUMP ................................................52
Exploded View ..................................................... ...52
Removal and Installation ........................................52
WASHER LEVEL SWITCH ................................53
Exploded View ..................................................... ...53
Removal and Installation ........................................53
WASHER NOZZLE & TUBE ..............................54
Exploded View ..................................................... ...54
WASHER NOZZLE ................................................ ...55
WASHER NOZZLE : Removal and Installation ......55
WASHER NOZZLE : Adjustment ............................55
WASHER TUBE ..................................................... ...56
WASHER TUBE : Removal and Installation ...........56
FRONT WIPER ARM .........................................58
Removal and Installation .........................................58
WIPER BLADE ............................................... ...59
WIPER BLADE ....................................................... ...59
WIPER BLADE : Removal and Installation .............59
WIPER BLADE : Adjustment ..................................60
WIPER BLADE REFILL ......................................... ...60
WIPER BLADE REFILL : Removal and Installation
...
60
FRONT WIPER DRIVE ASSEMBLY .............. ...64
Exploded View ..................................................... ...64
Removal and Installation .........................................64
WIPER AND WASHER SWITCH ................... ...65
Removal and Installation .........................................65
SERVICE DATA AND SPECIFICATIONS
(SDS) ............... ...........................................
66
SERVICE DATA AND SPECIFICATIONS
(SDS) .............................................................. ...
66
Specifications ....................................................... ...66
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM

PRECAUTIONSWW-3
< PRECAUTION >
C
D E
F
G H
I
J
K
M A
B
WW
N
O P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009951588
The Supplemental Restraint System such as “A IR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severi ty of injury to the driver and front passenger for certain
types of collision. Information necessary to service t he system safely is included in the SR and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inoper ative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including in correct removal and installation of the SRS, can lead to personal
injury caused by unintentional act ivation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipm ent on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identi fied by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Un it or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or el ectric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor( s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers , always switch the Ignition OFF, disconnect the
battery and wait at least three mi nutes before performing any service.
Precaution for Procedure without Cowl Top CoverINFOID:0000000009464598
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.
PIIB3706J
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM

WIPER AND WASHER SWITCHWW-65
< REMOVAL AND INSTALLATION >
C
D E
F
G H
I
J
K
M A
B
WW
N
O P
WIPER AND WASHER SWITCH
Removal and InstallationINFOID:0000000009464644
The wiper and washer switch is serviced as an assembly with the combination switch. Refer to BCS-
81, "Removal and Installation"
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM

WW-66
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SpecificationsINFOID:0000000009464645
WINDSHIELD WASHER FLUID
Windshield washer fluid capacity4.5 (4 3/4 US qt, 4 Imp qt)
Windshield washer fluid specification Refer to MA-11, "FOR USA AND CANADA : Fluids and Lubricants"
.
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM