battery NISSAN TITAN 2013 1.G Quick Reference Guide

11To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi
CRUISE CONTROL (if so equipped)
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON/OFF
switch

01 . The CRUISE
indicator light in the
vehicle information display will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch

02
and release. The SET indicator light in the vehicle information display will illuminate. Take

your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . When the
vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch
02 . Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
04 .

To turn off cruise control, push the ON/OFF switch
01 . Both the CRUISE

indicator light and SET indicator light in the vehicle information display will turn off.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
POWER OUTLETS (if so equipped)
12V OuTLeTS

The 12 volt power outlets are for powering electrical
accessories such as cellular telephones.

The power outlets located on the driver’s side of the
instrument panel

01 and in the center console arm

rest
02 are powered directly by the vehicle’s battery.

04
03
02
01
0103
02
first drive features

12To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi
FUEL-FILLER DOOR
The fuel-filler door is located on the driver’s side
of the vehicle.

To open the fuel-filler door, pull the lid open.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
The power outlets located on the passenger’s side of
the instrument panel

03 , and in the 2nd row
04 are

powered only when the ignition switch is placed in
the ACC or ON position.

To use a power outlet, open the cap.
120V O uTLeT (if so equipped)

The 120 volt power outlets are for powering electrical
devices up to 120 volt.

The power outlets located in the truck box
05 and
the center console
06 are powered directly by the
vehicle’s battery.

f or devices that require power of 120W or over, the
vehicle must be placed in the P (PAR k) position.

For powering devices that exceed
120V, first activate the power
inverter switch

07 .
f
or more information, refer to the “Starting and
driving (section 5)” of your Owner’s Manual.
04
05
06
07
07
first drive features