garage door opener NISSAN TITAN 2016 2.G Owners Manual

PERSONAL LIGHTS (if so equipped)
To turn the rear personal lights on, push the
switch. To turn them off, push the switch again.The HomeLink® Universal Transceiver provides
a convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.
HomeLink® Universal Transceiver:
● Will operate most Radio Frequency devices
such as garage doors, gates, home and of-
fice lighting, entry door locks and security
systems.
● Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi-
cle’s battery is discharged or is discon-
nected, HomeLink® will retain all program-
ming.
When the HomeLink® Universal Trans-
ceiver is programmed, retain the original
transmitter for future programming proce-
dures (Example: new vehicle purchases) .
Upon sale of the vehicle, the programmed
HomeLink® Universal Transceiver buttons
should be erased for security purposes. For
additional information, refer to “Program-
ming HomeLink®” in this section.
WARNING
● Do not use the HomeLink® Universal
Transceiver with any garage door
opener that lacks safety stop and re-
verse features as required by federal
safety standards. (These standards be-
came effective for opener models
manufactured after April 1, 1982) . A ga-
rage door opener which cannot detect
an object in the path of a closing garage
door and then automatically stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
● During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range) . Make sure that people or
objects are clear of the garage door,
gate, etc. that you are programming.
● Your vehicle’s engine should be turned
off while programming the HomeLink®
Universal Transceiver.
Rear personal lights
LIC0790
HOMELINK® UNIVERSAL
TRANSCEIVER (if so equipped)
2-86Instruments and controls

NOTE:
Some devices may require you to replace
Step 2 with the cycling procedure noted in
“Programming HomeLink® for Canadian
customers and gate openers” in this sec-
tion.3. Press and hold the programmed HomeLink® button and observe the indica-
tor light.
● If the indicator light
1is
solid/continuous, programming is
complete and your device should acti-
vate when the HomeLink® button is
pressed and released.
● If the indicator light
1blinks rapidly for
2 seconds and then turns to a
solid/continuous light, continue
with Steps 4-6 for a rolling code device.
A second person may make the following
steps easier. Use a ladder or other device.
Do not stand on your vehicle to perform
the next steps.
4. At the receiver located on the garage door opener motor in the garage, locate the
“learn” or “smart” button (the name and color
of the button may vary by manufacturer but it
is usually located near where the hanging
antenna wire is attached to the unit) . If there is difficulty locating the button, reference the
garage door opener’s manual.
5. Press and release the “learn” or “smart” but- ton.
6. Return to the vehicle and firmly press and hold the trained HomeLink® button for
2 seconds and release. Repeat the
“press/hold/release” sequence up to three
times to complete the training process.
HomeLink® should now activate your rolling
code equipped device.
7. If you have any questions or are having diffi- culty programming your HomeLink® but-
tons, refer to the HomeLink® web site at:
www.homelink.com or call 1-800-355-
3515.
PROGRAMMING HOMELINK® FOR
CANADIAN CUSTOMERS AND
GATE OPENERS
Canadian radio-frequency laws require transmit-
ter signals to “time-out” (or quit) after several
seconds of transmission – which may not be long
enough for HomeLink® to pick up the signal
during training. Similar to this Canadian law,
some U.S. gate operators are designed to “tim-
eout” in the same manner. If you live in Canada or you are having difficulties
training a gate operator
orgarage door opener
by using the “Training” procedures, replace
“Programming HomeLink®” Step 2with the
following:
NOTE:
When programming a garage door opener,
etc., unplug the device during the “cycling”
process to prevent possible damage to the
garage door opener components.
1.
For additional information, refer to “Program-
ming HomeLink®” step 1 in this section.
2. Using both hands, simultaneously press and hold the desired HomeLink® button and the
hand-held transmitter button. During train-
ing, your hand-held transmitter may auto-
matically stop transmitting. Continue to
press and hold the desired HomeLink® but-
ton while you press and re-press (“cycle”)
your hand-held transmitter every 2 seconds
until the frequency signal has been learned.
The HomeLink® indicator light will flash
slowly and then rapidly after several seconds
upon successful training. DO NOT release
until the HomeLink® indicator light flashes
slowly and then rapidly. When the indicator
light flashes rapidly, both buttons may be
released. The rapid flashing indicates suc-
cessful training.
2-88Instruments and controls

Engine serial number............10-13
Engine specifications ............10-9
Starting the engine ..........5-14,5-16
Engine coolant temperature gauge .......2-7
Engineoilpressuregauge.........2-9,2-10
Enterbutton....................4-4
Event Data recorders .............10-56
Exhaust gas (Carbon monoxide) .........5-2
Explanation of maintenance items ........9-2
Explanation of scheduled maintenance items . .9-5
Extendedstorageswitch ............2-70
F
Flashers (See hazard warning flasher switch) . .6-2
Flat tire .......................6-3
Floor mat positioning aid .............7-5
Fluid Brake fluid ..................8-11
Capacities and recommended
fuel/lubricants ................10-2
Engine coolant .................8-4
Engine oil ...................8-6
Power steering fluid .............8-11
Windshield-washerfluid...........8-12
F.M.V.S.S. certification label ..........10-13
Foglightswitch .................2-55
Four-Wheel Drive ................5-44
Front air bag system
(See supplemental restraint system) ......1-52
Front and rear sonar system ..........5-59
Front power seat adjustment ...........1-5
Frontseats.....................1-2 Fuel
Capacities and recommended
fuel/lubricants ................10-2
Fuel economy ................5-44
Fuel gauge ...................2-8
Fuel octane rating ..............10-6
Fuel recommendation ............10-5
Loose fuel cap warning ...........2-43
Fuel Cell Vehicle (FCV) System Tirepressure.................8-31
Fuel-filler door ..................3-22
Fuelgauge.....................2-8
Fuses.......................8-20
Fusiblelinks ...................8-21
G
Garage door opener, HomeLink® Universal
Transceiver . .2-86, 2-87, 2-88, 2-89, 2-89, 2-90
Gauge Automatic transmission fluid temperature
gauge .....................2-9
Engine coolant temperature gauge .....2-7
Engine oil pressure gauge .......2-9,2-10
Fuel gauge ...................2-8
Odometer ...................2-6
Speedometer .................2-6
Tachometer ..................2-7
Trip computer ................2-11
Trip odometer .................2-6
Voltmeter...................2-10
General maintenance ...............9-2
Glovebox.....................2-74
Grocery hooks ..................2-79 H
Hands-free phone system,
Bluetooth®...............4-114, 4-127
Hazard warning flasher switch ..........6-2
Headlightaimingcontrol ............2-53
Headlightandturnsignalswitch........2-51
Headlightcontrolswitch ............2-51
Headlights....................8-25
Headlights, aiming control ............2-53
Head restraints ..................1-10
Heated rear seats ................2-58
Heated seats ...................2-57
Heated steering wheel .............2-60
Heater Heater

and air conditioner (automatic)
(if so equipped) ...............4-41
Heater and air conditioner controls .....4-42
Heater operation ...........4-34,4-43
Heater and air conditioner (automatic) .....4-41
Hill descent control switch ...........2-62
Hill descent control system ...........5-58
Hill start assist system ..............5-58
HomeLink® Universal Transceiver . . .2-86, 2-87, 2-88, 2-89, 2-89, 2-90
Hood.......................3-21
Horn .......................2-55
I
Ignition Switch Push-Button Ignition Switch ........5-10
Immobilizer system ............2-46,5-14
Important vehicle information label ......10-13
11-3