check engine NISSAN VERSA HATCHBACK 2012 1.G Quick Reference Guide

niSSan intE lliGE nt KEy® SyStE m (if so equipped)
the niSSAn intelligent key® System allows you to lock or unlock your vehicle,
open your rear hatch and start the engine.

The operating range of the Intelligent Key is within 31.5 in (80 cm) from
each request switch.

To lock or unlock a door, push any door handle request switch
01 once.

Push any door handle request switch
01 within 1 minute of unlocking
the door and all other doors will unlock.
NOTE: It is important to make sure the Intelligent Key is with
you (that is, in your pocket or purse).
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
first drive features
01
3To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
rEar Hat CH rElEaSE (ni SSan intelligent Key®
models only)
To open the rear hatch, unlock it with one of the following operations:
• Press the

button
01 on the keyfob twice.
• Push the rear hatch request switch

02 while carrying the NISSAN
intelligent key® with you.

Then push the opener switch
03 located under the rear hatch handle.

Pull up on the rear hatch to open.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
02
03

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
StartinG/StoPPin G tHE EnG in E
cOntinuOuSLY VARiAbLe tRAnSMiSSiOn (cVt)
(niSSAn intelligent key® models only - if so equipped)

Depress the brake pedal.

Push the ignition switch in.

confirm the intelligent key system warning light is
illuminated green.

Turn the ignition switch to start the engine.

4
first drive features
SEat aDJ uStm EntS
Pull up on the lever
01 under the front of the seat and
slide forward or backward. Release the lever to lock the
seat in position.

Pull up on the lever
02 and lean back to recline the

seatback. To bring the seatback forward, pull the lever
up and lean your body forward. Release the lever to
lock the seatback in position.
SeAt LifteR (if so equipped for driver’s seat)

Pull up or push down on the adjusting lever
03
repeatedly to adjust the seat height.
for more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
0203
outS
iDE mirror Control SWit CH
Move the switch
01 right or left to select the right
or left mirror.

Move the control switch
02 up, down, right or left
to adjust the mirror angle.

Move the switch
01 to the middle “neutral” position
to prevent accidentally moving the mirror.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02