headlights NISSAN VERSA NOTE 2014 2.G Quick Reference Guide

8To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
NiSSaN iNTelli GeNT KeY® SYST eM
(if so equipped)
The NISSAN Intelligent k ey® System allows you to lock or unlock your
vehicle and activate the panic alarm. It is important to make sure the
Intelligent k ey is with you (that is, in your pocket or purse).

The operating range of the Intelligent k ey is within 31.5 in (80 cm) from
each request switch.

To lock the vehicle, press the
button
01 on the key fob or push
either door handle request switch 02 once.

To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch

02 once;
the corresponding door will unlock. Push the
door handle request switch
02 again within 60
seconds; all other doors will unlock, or
• Press the

button
03 on the key fob to unlock the driver’s side door. Press the

button again; all other doors will unlock.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding \
the
button
04 for more than 0.5 seconds. Once activated, the panic alarm and
headlights will stay on for a period of time.
INTELLIGENT k EY BATTERY DIS cHARGE

If the battery of the Intelligent k ey is discharged, or
environmental conditions interfere with the Intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (ParK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent k ey
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing
the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section\
5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
02
01
03
04
1598304_14b_VersaHatchback_QRG_090613.indd 89/6/13 1:44 PM

11To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
HeaD liGHT CoNTrol SwiTCH
HEADLIGHT c ONTROL


Turn the headlight control switch to the
position

01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
HIGH BEAM SELE cT


Push the headlight control switch forward
03 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
04 to
flash the headlight high beams on and off.
FOG LIGHT SWIT cH (if so equipped)

The headlights must be on and the low beams

selected for the fog lights to operate.


Turn the switch (inside collar) to the position
05
to turn the fog lights on.


Turn the switch (inside collar)
to the oFF position to
turn the fog lights off.
For more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
01
02
05
03
04
wi NDSH ielD wi Per aND waSH er SwiTCH
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MiST) – One sweep operation of
the wipers.

02 Intermittent (iNT) – Wipers operate
intermittently. The intermittent operation speed
can be adjusted by twisting the time control
ring
03 (if so equipped) to increase or
decrease wiper speed.

04 Low (lo) – Wipers operate at a
continuous low-speed.

05 High (Hi) – Wipers operate at a
continuous high-speed.

06 Washer – Pull the lever toward you
to activate the washer. The wipers will
operate several times.
0301
0405
MiST
oFF
02i NT
lo
Hi
06
09
1598304_14b_VersaHatchback_QRG_090613.indd 119/6/13 1:44 PM