unlock NISSAN X-TRAIL 2010 Owner's Manual


> (GLW    0RGHO 7$@
Hazard indicator mode(forSouth AfricaandEurope)
GUID-362 82E96-FFD1 -4266-BD28-6B6CCCE 40A4B
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-once HAZARD
-twice
Remote keylessentrysystem
(using
or
button) HAZARD
-once HAZARD
-twice
Hazard indicator mode(except forSouth AfricaandEurope)
GUID-657 18739-3E9 A-41CF-BB5 C-1F201A5A2 2CE
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-twice HAZARD
-none
Remote keylessentrysystem
(using
or
button) HAZARD
-twice HAZARD
-none
Hazard indicator andhorn mode (except forSouth AfricaandEurope)
GUID-EE13 7A74-2D68-4 16C-BCCB-700B45E14695
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-twice
OUTSIDE CHIME-twice HAZARD
-once
OUTSIDE CHIME-once
Remote keylessentrysystem
(using
or
button) HAZARD
-twice
HORN -once HAZARD
-once
HORN -none
Switching procedure (ifequipped)
GUID-84 9C8DE2-DB F7-4AA6-90D 4-DCA29B9D DF46
T o switch thehazard indicator andhorn (chime)
operation, pushtheLOCK
and UNLOCK
buttons onthe Intelligent Key simultaneously formore
than 2.5seconds.
. When thehazard indicator modeisset, thehazard
indicator flashes3times. .
When thehazard indicator andhorn mode areset,
the hazard indicator flashesonceandthehorn
chirps once.
JI0469
Pre-driving checksandadjustments
3-19
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OPENING HOOD
T32A1308 27-335B9F3 6-A2B6-4F60-8C88-243 636A15C7A
JVP0288X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
grille, andpush thelever sideways withyour
fingertips.
3. Raise thehood.
4. Remove thesupport rodand insert itinto theslot
*
3
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
T32A130827- 25073346-5A1D-4F8E-8 B28-82B4A41B9CC7
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
T32A130827- 405C1781-AE 61-4D43-A40E-A626866CFB76
WARNING:
. Always besure theback doorhasbeen
closed securely toprevent itfrom opening
while driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle. SeeªPrecautions
when starting anddrivingº (P.5-3) forex-
haust gas.
. Donot leave children unattended insidethe
vehicle. Theycould unknowingly activate
switches orcontrols. Unattended children
could become involved inserious accidents.
. Always besure thathands andfeet areclear
of the door frame toavoid injury while
closing theback door.
OPERA TINGMANUAL BACKDOOR
GUID-3A35 60E3-6F46-4 D3E-8487-69C8562C7AD 6
JVP0281X
T o open theback door, unlock itand push theopener
switch
*
A
. Pull upthe back doortoopen.
The back doorcanbeunlocked by:
Pre-driving checksandadjustments
3-23
BACK
DOOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-24
Pre-driving checksandadjustments
. pushing theªUNL OCKº
button onthe key.
. pushing theback doorrequest switch(if
equipped) .
. pushing thedoor handle request switch(if
equipped) .
. pushing thepower doorlockswitch tothe unlock
position.
T o close theback door, pulldown untilitsecurely
locks.
OPERA TINGPOWER BACKDOOR (if
equipped)
GUID-436541 C3-01DD-453A-AEA7-12BEFABBEB19
T o operate thepower backdoor, theshift lever must be
in the P(Park) position.
The power backdoorwillnotoperate ifthe battery
voltage islow .
P ower backdoormain switch
GUID-1E87 F67F-2B4F-4 F44-B5FB-976E0AD39F 92
JVP0282X
T ype A
*
1
P ower open (hands-free operation)
*
2
P ower open/close (switchoperation)
*
3
Manual operation
JVP0309X
T ype B
*
1
P ower open/close (switchoperation)
*
2
Manual operation
The power backdooroperation canbeturned onoroff
with thepower backdoormain switch onthe
instrument panel.
When thepower doormain switch ispushed tothe
ªOFFº position
*
3
(T ype A)or
*
2
(T ype B),power
operation isavailable byusing thepower backdoor
button onthe Intelligent Key .
P ower open (switch operation)
GUID-FEE A27BB-7EA9-4 260-927A-54954CB04 325
JVP0290X
Power backdoorswitch ÐInstrument panel
JVP0283X
Back dooropener switch
SP A2562
Power backdoorbutton - Key
JVP0285X
Power backdoorswitch ÐBack door
When theback doorisfully closed, theback doorwill
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
JVH0831X
Models without TA button
1. DISP (Display) button
2. RADIO button
3. Day/Night button
4. MIXbutton
5. Seek/track (rewind)button
6. Seek/track (fastforward) button
7. SETUP button
8. Back button
9. CDeject button 10.
MEDIA button
11. Phone button
12. Power/VOL (Volume) dial
13. RPT(repeat) button
14. Station memory buttons
15. A-Zbutton
16. MENU/ENTER dial
Anti-theft system(ifequipped)
GUID-62 FF74DB-01 4B-40D1-A1 35-3AC93D8F D1E2
Use ofa4-digit radioPIN(Personal Identification
Number) code,known onlytothe vehicle owner,
effectively reducesthepossibility ofthe audio unit
being stolen. Without thePIN code theaudio unit
cannot beactivated.
If force isused totry and remove theaudio unit,the
Anti-theft systemactivates andtheaudio unitislocked.
The only waytounlock theaudio unitisto enter the
radio code number shownonanidentification card
supplied withthevehicle documentation.
NO TE:
. The 4digit radio codeisshown onacard
that youreceived withyour vehicle docu-
mentation.
. Contact aNISSAN dealerifyou dolose the4
digit radio codeofthe audio unit.
Unlocking theunit :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the battery supplytothe vehicle isinterrupted, the
audio unitwilllock.
When thepower isrestored andtheunit switched on,
the display willshow ªRadio Codeºanditwill be
unlocked whenthecodes havebeen entered correctly .
Unlocking procedure:
Read thissection verycarefully .It is important thatthe
instructions arefollowed precisely.
T o unlock theaudio unit,proceed asfollows:
Display screen,heaterandairconditioner ,and audio system
4-45
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-8
Starting anddriving
3. Place theignition switchinthe ªLOCKº position.
4. Remove thekey.
If the ignition switchisturned tothe ªLOCKº position,
the shift lever cannot bemoved fromtheªPº (Park)
position. Theshift lever canbemoved ifthe ignition
switch isin the ªONº position withthefoot brake pedal
depressed.
The ªOFFº position
*
1
is between theªLOCKº and
ªONº positions, althoughitis not marked onthe
ignition switch.
MANUAL TRANSMISSION (MT)
T32A1308 27-AC9B641 D-BD35-4AF4-83C0-7458C9A972 F2
JVS0409X
The ignition switchincludes adevice thathelps
prevent accidental removalofthe key while driving.
The keycan only beremoved whentheignition switch
is in the ªLOCKº position.
1. Turn theignition switchslightly inthe ªONº
direction.
2. Place theignition switchinthe ªLOCKº position.
3. Remove thekey.
The ªOFFº position
*
1
is between theªLOCKº and
ªONº positions, althoughitis not marked onthe
ignition switch.
STEERING LOCK (ifequipped)
T32A1308 27-034768 C7-0064-46 14-AD37-661 7B6EE9A7F
T o lock steering wheel
T32A1308 27-96BC47 46-D027-4F2 F-BE51-24E0 F70F7D7C
1. Place theignition switchinthe ªLOCKº position.
2. Remove thekey,if it is inserted inthe ignition
switch.
3. Turn thesteering wheel1/6ofaturn clockwise
from thestraight upposition.
T o unlock steering wheel
T32A1308 27-238448 DA-E61D-4 230-BDC4-7 65C7822D857
1. Insert thekey into theignition switch.
2. Gently turntheignition switchwhilerotating the
steering wheelslightly rightandleft.
KEY POSITIONS
T32A1308 27-517E0B 80-0FCC-4E 32-84E7-A02 026650916
L OCK (OFF)/L OCK(ACC) (0)
T32A1308 27-1EECA4 4F-6B9C-469F-AD46-0 8410CAFDB 59
. The ignition keycan only beremoved atthis
position.
. Thesteering lock(ifequipped) canonly belocked
at this position.
. The electrical accessory poweractivates without
the engine turnedon.(ACC position)
OFF/OFF(ACC) (1)
T32A1308 27-E0306A2 A-B0CE-4142-9178-4D C58906EEE1
. The engine isturned offwith thesteering wheel
unlocked.
. The electrical accessory poweractivates without
the engine turnedon.(ACC position)
ON (2)
T32A1308 27-99608CE 7-C1A4-419A-AB31-5DED 98FA480D
The ignition systemandtheelectrical accessory power
activate withouttheengine turnedon.
ST ART (3)
T32A130 827-DC8716 CC-7528-494E-8851- 5E7C1C8FB 7AB
The engine starteractivates andtheengine willstart.
The ignition switch,whenreleased, willautomatically
turn tothe ªONº position.
CAUTION:
As soon asthe engine hasstarted, releasethe
ignition switchimmediately.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-10
Starting anddriving
STEERING LOCK (ifequipped)
GUID-51 E55D68-F23A-4 B9F-922D-FB2A89F4 61A5
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-DAE59 353-C43A-4135-85E1 -2B9AABDD5 C86
1. Place theignition switchinthe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-38F2C6 E2-71BA-4EB6-AD76-1 DA96CF7E0F3
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe steering lockrelease malfunction
indicator appearsonthe vehicle information
display, pushtheignition switchagainwhile
rotating thesteering wheelslightly tothe
right andleft.
(See ªVehicle information displayº(P.2-20) .)
IGNITION SWITCHPOSITIONS
GUID-16FB F6ED-49B2- 4CD6-9EF9-8B109D501B 73
WARNING:
Never placetheignition switchinthe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
. Do not leave thevehicle forextended
periods oftime when theignition switchis
in the ªONº position andtheengine isnot
running. Thiscandischarge thebattery.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery. Ifyou must useaccessories while
the engine isnot running, donot use them
for extended periodsoftime anddonot use
multiple electrical accessories atthe same
time.
JVS0394X
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission model)
orthe clutch pedal(Manual Transmission
model) ,the ignition switchwillilluminate.
Push theignition switchcenter:
. once tochange toªONº .
. twotimes tochange toªOFFº .
The ignition switchwillautomatically returntothe
ªL OCKº position whenanydoor iseither opened or
closed withtheswitch inthe OFF position.
L OCK position
GUID-ED5 510B6-7895-4 E20-81E6-DE8C23CAA8 BB
The ignition switchandsteering lock(ifequipped) can
only belocked atthis position.
The ignition switchwilllock when anydoor isopened
or closed withtheignition switched off.
ON position
GUID-185 3F228-2702- 4CE6-858C-9 045EB728323
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
The ªONº position hasabattery saverfeature thatwill
place theignition switchinthe ªOFFº position, ifthe
vehicle isnot running, aftersome timeunder the
following conditions:
. alldoors areclosed.
. shift lever isin ªPº (Park) position (CVTmodel) or
ªNº (Neutral) position(MTmodel) .
The battery saverfeature willbecancelled ifany ofthe
following occur:
. anydoor isopened.
. shift lever ismoved outofthe ªPº (Park) position.
. ignition switchchanges position.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-26
Maintenance anddo-it-yours elf
Glove box
GUID-15 A32307-713 7-4C89-A48B-85EC6F 9F70D8
JVM0388X
RHD model
1. Be sure theignition switchisin the ªOFFº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Open theglove boxand unlock thedamper
*
1
.
4. Hold theglove boxlidso that thedistance
between theupper endofthe lidand the
dashboard isabout 5cm (2in),and then pulloff
the hinges
*
2
located onthe underside ofthe lid.
5. Unlock theleftand right stoppers
*
3
and remove
the glove boxlid.
6. Locate thefuse thatneeds tobe replaced.
7. Remove thefuse using thefuse puller.
SDI1754
8. Ifthe fuse isopen
*
A
, replace itwith anew fuse
*
B
.
If the new fuse alsoopens, afterinstalling, havethe
electrical systemchecked, andifnecessary repaired,
by aNISSAN dealer.
Extended storagefuseswitch
GUID-4D ACCDD0-02 EB-4845-B9C4-BFD1E AF1C1EF
JVM0415X
Example
T o reduce batterydrain,theextended storagefuse
switch comes fromthefactory switched off.Prior to
delivery ofyour vehicle, theswitch ispushed in
(switched on)and should always remainon.
If the extended storagefuseswitch isnot pushed in
(switched on),the ªShipping ModeOnPush Storage
Fuseº warning mayappear inthe vehicle information
display .See ªVehicle information displaywarnings and
indicatorsº (P.2-28) .
If any electrical equipment doesnotoperate, remove
the extended storagefuseswitch andpush itin again.
NO TE:
If the extended storagefuseswitch malfunc-
tions, seeaNISSAN dealer.
How toremove theextended storagefuse
switch:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. To remove theextended storagefuseswitch, be
sure theignition switchisin the ªOFFº orªLOCKº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
&RQGLWLRQ
([FHSWIRU&KLQD