ISO NISSAN X-TRAIL 2010 Repair Manual


> (GLW    0RGHO 7$@
Specification chart(forCDplayer/Radio Type E):
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Supported media CD,
CD-R, CD-RW ,USB2.0
Supported filesystems ISO9660
LEVEL1,ISO9660 LEVEL2,AppleISO,Romeo, Joliet
*ISO9660 LEVEL3(packet writing)isnot supported.
Supported
versions*1 MP3
V
ersion MPEG1,
MPEG2, MPEG2.5
Sampling frequency 8
kHz -48 kHz
Bit rate 8
kbps -320 kbps, VBR
WMA*2 V
ersion WMA7,
WMA8,WMA9
Sampling frequency 32
kHz -48 kHz
Bit rate 48
kbps -192 kbps, VBR
T ag information ID3
tagVER1.0, VER1.1,VER2.2, VER2.3(MP3only)
Folder levels Folder
levels:8,Max folders: 255(including rootfolder) ,Files: 512(Max. 255filesforone folder)
Displayable charactercodes*2 01:
ASCII, 02:ISO-8859-1, 03:UNICODE (UTF-16BOMBigEndian) ,04: UNICODE (UTF-16Non-BOM Big
Endian) ,05: UNICODE (UTF-8),06: UNICODE (Non-UTF-16 BOMLittleEndian)
*1 Filescreated withacombination of48 kHz sampling frequency and64kbps bitrate cannot beplayed.
*2 Available codesdepend onwhat kindofmedia, versions andinformation aregoing tobe displayed.
Display screen,heaterandairconditioner ,and audio system
4-41
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-48
Display screen,heaterandaircondition er,and audio system
T o change theradio bands, pushtheRADIO button
until thedesired bandappears.
FM 1? FM 2? AM ?FM 1
When theRADIO buttonispushed formore than1.5
seconds, thesixstations withthestrongest signalsare
stored inthe preset (1to6) buttons ofthe band.
During thesearch, anotification messageappearson
the display andthesound ismuted untiltheoperation
is complete. Oncecompleted, theradio selects preset
button.
Seek/track buttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push
or
button brieflytomanually change
the frequency .
T o adjust thebroadcasting stationfrequency auto-
matically ,push andhold the
or
button. When
the system detects abroadcasting station,itwill stop
at the station.
&
1
&
2
&
3
&
4
&
5
&
6
Station memory buttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
During radioreception, pushingthestation memory
button forless than 2seconds willselect thestored
radio station.
The audio system canstore upto12 FM station
frequencies (6ineach ofFM 1and FM2)and 6AM
station frequencies.
T o store thestation frequency manually:
1. Tune tothe desired broadcasting stationfre-
quency byusing theSeek/track buttons.
2. Push andhold astation memory button
&
1
-
&
6
until abeep sounds. (Theradio mutes whenthe
memory buttonispushed.)
3. The channel indicator willdisplay andtheradio
mute disengages, indicatingthatthememory is stored
properly .
4. Perform steps1-3 for allother memory buttons.
If the battery cableisdisconnected, orifthe audio fuse
blows, thestation memory willbeerased. Insuch a
case, resetthedesired stations.
Radio DataSystem (RDS)operation (if
equipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The RDS isasystem through whichencoded digital
information istransmitted byFM radio stations in
addition tothe normal FMradio broadcasting. The
RDS provides information servicessuchasstation
name, trafficinformation, ornews.
NO TE:
In some countries orregions, someofthese
services maynotbeavailable.
Alternative Frequency(AF)mode
The AFmode operates inthe FM (radio) mode.
. The AFmode operates inthe FM (radio) ,AUX or
CD mode (ifFM was previously selectedinthe
radio mode) .
. The AFfunction compares signalstrengths and
selects thestation withtheoptimum reception
conditions forthe currently tuned-instation.
RDS functions
When anRDS station istuned inwith seek ormanual
tuning, theRDS dataisreceived andtheProgramme
Service (PS)name isdisplayed. T
A (Traffic announcement) button(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The TA functions areavailable inthe mode ofRadio
(FM) orany other audio source.
. Pushing theTA button selects theTA mode. The
T A indicator isdisplayed whileTA mode ison.
. When TA button ispushed again.Themode will
be switched offand theTA indicator willdisappear
from thedisplay .
T raffic announcement interruptfunction
When atraffic announcement isreceived, thean-
nouncement istuned inand thedisplay showsa
notification messagewiththeradio station name.
Once thetraffic announcement hasfinished, theunit
returns tothe source thatwas active before thetraffic
announcement started.
If TA button ispushed duringatraffic announcement,
the traffic announcement interruptmodeiscancelled.
The TA mode returns tothe standby modeandthe
audio unitreturns tothe previous source.
CD player operation
GUID-A88B CE4A-E757-44BC-9108 -D36196586FC6
Loading:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Insert aCD into theslot with thelabel sidefacing up.
The CDwillbeguided automatically intotheslot and
will start playing. Afterloading theCD, thenumber of
tracks andtheplaytime willappear onthe display .
CAUTION:
Do not force theCDinto theslot. Thiscould
damage theplayer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-54
Display screen,heaterandaircondition er,and audio system
Day/Night button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theDay/Night buttontoswitch thedisplay
brightness betweenthedaytime andnighttime modes.
The switches onthe audio unitwillalso illuminate inthe
nighttime mode.
MUTE button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theMUTE button tomute theaudio system. Push
the button againtounmute.
MEDIA button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theMEDIA buttontoplay acompatible device
when itis connected.
Each timetheMEDIA buttonispushed, theaudio
source willchange asfollows:
CD ?USB/iPo d? AUX ?CD
The source thatarenot available willbeskipped.
Radio operation
GUID-004 3115D-714 9-40FB-9AC 0-68E93FF5DF24
The audio system operates whentheignition switchis
placed inthe ªONº orªACCº position.
RADIO button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theRADIO buttonispushed whiletheaudio
system isoff, the audio system willturn onand the
radio willturn on.
When theRADIO buttonispushed whileanother
audio source isplaying, theother audio source willturn
off and theradio willturn on.
T o change theradio bands, pushtheRADIO button
until thedesired bandappears.
FM 1? FM 2? AM ?FM 1 When
theRADIO buttonispushed formore than1.5
seconds, thesixstations withthestrongest signalsare
stored inthe preset (1to6) buttons ofthe band.
During thesearch, anotification messageappearson
the display andthesound ismuted untiltheoperation
is complete. Oncecompleted, theradio selects preset
button.
Seek/track buttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push
or
button brieflytomanually change
the frequency .
T o adjust thebroadcasting stationfrequency auto-
matically ,push andhold the
or
button. When
the system detects abroadcasting station,itwill stop
at the station.
&
1
&
2
&
3
&
4
&
5
&
6
Station memory buttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
During radioreception, pushingthestation memory
button forless than 2seconds willselect thestored
radio station.
The audio system canstore upto12 FM station
frequencies (6ineach ofFM 1and FM2)and 6AM
station frequencies.
T o store thestation frequency manually:
1. Tune tothe desired broadcasting stationfre-
quency byusing theSeek/track buttons.
2. Push andhold astation memory button
&
1
-
&
6
until abeep sounds. (Theradio mutes whenthe
memory buttonispushed.)
3. The channel indicator willdisplay andtheradio
mute disengages, indicatingthatthememory is
stored properly .
4. Perform steps1-3 for allother memory buttons.
If the battery cableisdisconnected, orifthe audio fuse blows,
thestation memory willbeerased. Insuch a
case, resetthedesired stations.
CD player operation
GUID-35DC 47E5-5D9B-4A48-82BA-D 602BFC603A6
The audio system operates whentheignition switchis
placed inthe ªONº orªACCº position.
Loading:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Insert aCD into theslot with thelabel sidefacing up.
The CDwillbeguided automatically intotheslot and
will start playing. Afterloading theCD, thenumber of
tracks andtheplaytime willappear onthe display .
CAUTION:
Do not force theCDinto theslot. Thiscould
damage theplayer.
NO TE:
. The CDplayer accepts normalaudioCDsor
CDs containing MP3/WMA files.
. The audio unitwillautomatically detectifa
CD containing MP3/WMA filesisinserted,
and ªMP3CDº willbeindicated.
. Anerror notification messagewillbedis-
played wheninserting anincompatible disc
type (e.g.DVD) ,or ifthe player cannot read
the CD. Eject thedisc andinsert another
disc .
MEDIA button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change tothe CD mode, pushtheMEDIA button
with aCD inserted untiltheCD mode isselected.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
* iPod and iPhone areatrademark ofApple Inc.,
registered inthe U.S. andother countries.
Refer toyour device manufacturer's ownerinformation
regarding theproper useand care ofthe device.
Compatibility:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The following modelsarecompatible:
. iPod nano 1G(Firmware version1.3.1-)
. iPod nano 2G(Firmware version1.1.3-)
. iPod nano 3G(Firmware version1.0.0-)
. iPod nano 4G(Firmware version1.0.2-)
. iPod nano 5G(Firmware version1.0.1-)
. iPod nano 6G(Firmware version1.0-)
. iPod nano 7G(Firmware version1.0.0-)
. iPod 5G (Firmware version1.2.1-)
. iPod classic (Firmware version1.0.0-)
. iPod Touch (iOS1.1-)
. iPod Touch 2G(iOS 2.1.1 -)
. iPod Touch 3G(iOS 3.1-)
. iPod Touch 4G(iOS 4.1-)
. iPod Touch 5G(iOS 6.0.0 -)
. iPhone (iOS1.0.0 -2.2.1)
. iPhone 3G(iOS 2.1-)
. iPhone 3GS(iOS3.0-)
. iPhone 4/4S(iOS4.0-)
. iPhone 5(iOS 6.0.0 -)
Operations attributable tofirmware updatebyApple
are not guaranteed.
iPod main operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The system operates whentheignition switchisin the
ªONº orªACCº position. PushtheMEDIA button
repeatedly orpush theiPod MENU buttontoswitch to
the iPod mode.
If the system hasbeen turned offwhile theiPod was playing,
pushing thePower/VOL dialwillstart theiPod.
If another audiosource isplaying andtheiPod is
connected, pushingtheiPod MENU buttonorthe
MEDIA buttonrepeatedly willchange tothe iPod
mode.
When theiPod MENU buttonispushed whiletheiPod
is connected, theinterface foriPod operation isshown
on the audio display .The items onthe menu listcan be
scrolled byturning theTUNE´FOLDER dialwhile the
iP od isoperating. To select anitem, push ENTER/
SETTING button.Itemsinthe iPod menu appear on
the display inthe following order.
. Now playing
. Playlists
. Artists
. Albums
. Songs
. Podcasts
. Genres
. Composers
. Audiobooks
. Shuffle Songs
Push theBACK button toreturn tothe previous
screen.
For more information abouteachitem,seetheiPod
Owner's Manual.
Previous/Next Track andFast Re-
wind/Forward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theSEEK´TRACK (rewind)orSEEK´TRACK
(fast forward) buttonispushed formore than1.5
seconds whiletheiPod isplaying, theiPod will play
while fastforwarding orrewinding. Whenthebutton is
released, theiPod will return tothe normal playspeed. When
theSEEK´TRACK (rewind)orSEEK´TRACK
(fast forward) buttonispushed forless than 1.5
seconds whiletheiPod isplaying, thenext track orthe
beginning ofthe current trackonthe iPodwill be
played.
REPEA T(RPT) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theRPT button ispushed whileatrack isbeing
played, theplay pattern canbechanged asfollows:
(Repeat off)?1Track Repeat? AllRepeat ?
(Repeat off)
RANDOM (RDM):
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theRDM button ispushed whileatrack isbeing
played, theplay pattern canbechanged asfollows:
(Shuffle off)?Track Shuffle ?(Shuffle off)
Bluetooth


> (GLW    0RGHO 7$@
4-98
Display screen,heaterandaircondition er,and audio system
TELEPHONE SETUP
GUID-B69265 15-80D2-4955-9E58-1 005539D361 E
T o access thephone settings screen:
1. Push theSETUP button.
2. Touch theªTelephone &Bluetoothº key.
3. Touch theªTelephone Setupºkey.
Available settingitems:
. Sort Phonebook By:
Select ªFirstNameº orªLast Nameº tochoose
how phonebook entriesarealphabetically dis-
played onthe screen.
. From Phonebook/Use Phonebookfrom:
Select ªPhoneº touse thehandset's phonebook.
Select ªSIMºtouse thephonebook onthe SIM
card. Select ªBothº touse both sources.
. Download Phonebook Now:
Select todownload thephonebook tothe vehicle
from thechosen source.
. Record nameforPhonebook Entry(Mexico only):
Select torecord aname foraphonebook entryfor
use with thevoice recognition system.
. Phone Notifications (Mexicoonly):
Select ªDriverº tohave phone notifications shown
in the vehicle information display.Select ªBothº to
have phone notifications showninboth thevehicle
information displayandthecenter display screen.
. Text Messaging (Mexicoonly):
Select ªOnºorªOffº toactivate ordeactivate text
messaging feature.SeeªText messaging (for
Mexico)º (P.4-96) .
. Show Incoming Text (Mexico only):
Select ªDriverº tohave incoming textnotifications
shown inthe vehicle information display.Select
ªBothº tohave textnotifications showninboth the
vehicle information displayandthecenter display screen.
SelectªOffºtoturn offalltext notifications.
. Auto Reply (Mexico only):
Select ªOnºtohave thesystem automatically reply
to caller withapredetermined textmessage.
Select ªOffºtoturn offauto reply function.
. Auto Reply Message (Mexicoonly):
Select toindicate preferred messagetobe used
when ªAuto Replyº function isactivated.
. Use Vehicles's Signature (Mexicoonly):
Select ªOnºtohave vehicle signature shownin
outgoing textmessages orªOffº todeactivate the
function.
. Custom Text Messages (Mexicoonly):
Select thisoption toselect acustom message to
edit. There are4customer messageslotsavail-
able.
GUID-00 DF6CF3-DC 03-4508-9AB0-1F2E8B0 AAD8E
The Voice Recognition systemallowshands-free
operation ofthe systems equipped onthis vehicle,
such asthe phone andnavigation systems.
T o operate theVoice Recognition system,pushthe
button located onthe steering wheel.When
prompted, speakthecommand forthe system you
wish toactivate. Thecommand givenispicked upby
the microphone andperformed whenitis properly
recognized. TheVoice Recognition willprovide avoice
response aswell asamessage inthe center display to
inform youofthe command results.
CONTROL BUTTONS ANDMICROPHONE
GUID-661F9 80D-48BA-4 9AC-8773-4B 16B7F09CBD
Steering wheelmounted controls:
JVH0864X
1. Back
button
2. Talk
button
3. Cancel
button
Microphone:
Microphone islocated nearthemap light.
VOICE RECOGNITI ONSY STEM (if
equipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-10
Starting anddriving
STEERING LOCK (ifequipped)
GUID-51 E55D68-F23A-4 B9F-922D-FB2A89F4 61A5
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-DAE59 353-C43A-4135-85E1 -2B9AABDD5 C86
1. Place theignition switchinthe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-38F2C6 E2-71BA-4EB6-AD76-1 DA96CF7E0F3
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe steering lockrelease malfunction
indicator appearsonthe vehicle information
display, pushtheignition switchagainwhile
rotating thesteering wheelslightly tothe
right andleft.
(See ªVehicle information displayº(P.2-20) .)
IGNITION SWITCHPOSITIONS
GUID-16FB F6ED-49B2- 4CD6-9EF9-8B109D501B 73
WARNING:
Never placetheignition switchinthe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
. Do not leave thevehicle forextended
periods oftime when theignition switchis
in the ªONº position andtheengine isnot
running. Thiscandischarge thebattery.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery. Ifyou must useaccessories while
the engine isnot running, donot use them
for extended periodsoftime anddonot use
multiple electrical accessories atthe same
time.
JVS0394X
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission model)
orthe clutch pedal(Manual Transmission
model) ,the ignition switchwillilluminate.
Push theignition switchcenter:
. once tochange toªONº .
. twotimes tochange toªOFFº .
The ignition switchwillautomatically returntothe
ªL OCKº position whenanydoor iseither opened or
closed withtheswitch inthe OFF position.
L OCK position
GUID-ED5 510B6-7895-4 E20-81E6-DE8C23CAA8 BB
The ignition switchandsteering lock(ifequipped) can
only belocked atthis position.
The ignition switchwilllock when anydoor isopened
or closed withtheignition switched off.
ON position
GUID-185 3F228-2702- 4CE6-858C-9 045EB728323
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
The ªONº position hasabattery saverfeature thatwill
place theignition switchinthe ªOFFº position, ifthe
vehicle isnot running, aftersome timeunder the
following conditions:
. alldoors areclosed.
. shift lever isin ªPº (Park) position (CVTmodel) or
ªNº (Neutral) position(MTmodel) .
The battery saverfeature willbecancelled ifany ofthe
following occur:
. anydoor isopened.
. shift lever ismoved outofthe ªPº (Park) position.
. ignition switchchanges position.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OFF position
GUID-DA2B 9201-206A-4 06B-891F-59A88D312FBD
The engine isturned offinthis position.
Auto ACC position
GUID-0E2 947FE-3378-4474-91 C2-392C409 08C39
With thevehicle inthe ªPº (Park) position, the
Intelligent Key with youand theignition placedfrom
ªONº toªOFFº ,the radio canstillbeused foraperiod
of time, oruntil thedriver's doorisopened. Aftera
period oftime, functions suchasradio, navigation (if
equipped) ,and Bluetooth


> (GLW    0RGHO 7$@
. when theengine coolant temperature islow.
. when thebattery capacity islow.
. when thebattery temperature islow.
. when thevehicle ismoved.
. when thevacuum inthe brake servode-
creases.
. when theengine hoodisopened withthe
engine running.
. when theengine isturned onwith the
engine hoodopen.
. when thedriver's seatbeltisnot fastened.
. when thedriver's doorisopen.
. when thesteering wheelisoperated (for
CVT model) .
. when theStop/Start orIdling StopSystem
indicator blinksatalow speed.
. when thefan speed control isin any position
other thanªOFFº (0)while theairflow
control isin the front defogger position.
. when thefront defogger switchison.
. when thetemperature insidethevehicle is
too high orlow. (When theairconditioner is
off, theStop/Start SystemorIdling Stop
System willoperate.)
. when thefanspeed ofthe airconditioner is
set tothe maximum speed.
. when theStop/Start orIdling StopOFF
switch isturned on.
. when thepower consumption islarge.
. when thevehicle istraveling ataltitudes
higher than2,000 m(6,562 ft)(for MTmodel) .
. when thevehicle istravelling ataltitudes
higher than1500m (4922ft)(R9M engine in
combination withCVTmodels) . .
For Manual Transmission (MT)models
Ð when theshift lever isin any position
except theªNº(Neutral) position.
Ð when theclutch pedalisdepressed.
Ð when theIntelligent Keyisnot inthe
vehicle.
. For Continuously Variable Transmission
(CVT) models
Ð when theaccelerator pedalisdepressed.
Ð when theshift lever isin the ªRº(Reverse)
position.
Ð when thebrake pedalisnot firmly
depressed.
Ð when stopping thevehicle onsteep
sloping roads.
. when theelectric powersteering warning
light, theAnti-lock BrakingSystem(ABS)
warning light,orthe Vehicle Dynamic Con-
trol (VDC)/Electronic StabilityProgram
(ESP) warning lightilluminates.
NO TE:
The engine willnotrestart evenifthe brake
pedal isreleased (CVT)orclutch pedalis
pressed (MT)while theStop/Start Systemor
Idling StopSystem isactivated underthe
following condition:
. when theshift lever isin the ªPº(Park)
position (CVTmodel) .
. when theengine hoodisopened.
. when thedriver seatbeltisunfastened and
the driver's doorisopened (MTmodel) .
. when thegear shiftlever isnot inthe Neutral
position (MTmodels) . NO
TE:
It may take some timeuntil theStop/Start or
Idling StopSystem activates underthefollowing
conditions:
. when thebattery isdischarged.
. when theoutside temperature islow orhigh.
. when thebattery isreplaced orthe battery
terminal isdisconnected forextended peri-
ods and then reconnected.
NO TE:
When theStop/Start SystemorIdling Stop
indicator illuminates, theengine startsrunning
automatically underatleast oneofthe following
conditions:
. the brake pedalisreleased withtheshift
lever inthe ªDº(Drive) orªNº (Neutral)
position (forCVT model) .
. theshift lever isplaced inthe ªDº(Drive) or
ªRº (Reverse) positionfromtheªNº(Neutral)
or ªPº (Park) position (forCVT model) .
. the driver's seatbeltisunfastened, orthe
driver's doorisopen (forCVT model) .
. the battery voltage becomes low(due to
electrical loadfrom other vehicle systems
like headlights, heaters,etc.,or auxiliary
devices connected tothe 12volt socket
inside thevehicle) .
. the vehicle speedisabove about2km/h (1
MPH) .
. thefront defogger isoperated.
. when thetemperature insidethevehicle is
too high orlow. (When theairconditioner is
off, theStop/Start SystemorIdling Stop
System willoperate.)
Starting anddriving
5-19
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-20
Starting anddriving
. when thefront defogger isturned on.(The
engine maynotstarts depending onthe
outside temperature.)
. when morethan3minutes haveelapsed
since theStop/Start SystemorIdling Stop
System wasactive (forCVT model) .
. when theaccelerator pedalisdepressed (for
CVT model) .
. when thesteering wheelisoperated. (The
steering wheeloperation maybecome hea-
vy, but this isnot amalfunction.) (forCVT
model)
. when thebattery capacity islow.
. when thepower consumption ishigh.
. when theshift lever isplaced inthe ªRº
(Reverse) position(forCVT model) .
. when theclutch pedalisdepressed (forMT
model) .
CAUTION:
Only engage gearwhen theclutch pedalisfully
depressed (forMTmodel) .
NO TE:
The following conditions willprevent theStop/
Start System orIdling StopSystem fromauto-
matically restarting theengine. Starting the
engine withtheignition switchoperation isthen
necessary:
. the driver's seatbeltisunfastened, and
driver's doorisopen (forMTmodel) .
. thehood isopen.
Use thissystem whilewaiting atstoplight, etc.When
the vehicle isstopped forlong periods oftime, turnoff
the engine. When
theengine isstopped bythe Stop/Start System
or Idling StopSystem, heating,coolinganddehumi-
difying functions willbedeactivated. To avoid theair
conditioning functionsfrombeing deactivated, turnoff
the Idling Stopmode bypressing theStop/Start or
Idling StopOFFswitch.
ST OP/ST ARTSYSTEM ORIDLING STOP
S YSTEM DISPLA Y
GUID-D5 6CB066-F 6D6-49D2-8 2F7-415D89 07262F
Engine stop
GUID-78FE A13F-8F8D-4B 8D-BC97-67B76FF15 251
JVS0341X
When theengine isstopped theinformation is
displayed forafew seconds.
Stop/Start systemorIdling StopSystem ON
or OFF
GUID-6BC 66795-C2D6 -4F71-9A5B-5ECF0E05 EDF2
JVS0342X
If the Stop/Start SystemorIdling StopSystem is
activated ordeactivated usingtheStop/Start System
or Idling StopSystem OFFswitch, themessage is
shown.
CO2 orfuel saved andengine stoptime
GUID-D9 5A9EFA-4A9B-4 F92-9873-69 DBB336EB8 7
JVS0430X
The CO2 orfuel saved andtheengine stoptimemode
shows thefollowing items:
. The CO2 saved shows theestimated quantityof
CO2 exhaust emissions thatwere prevented by
the Stop/Start SystemorIdling StopSystem every
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4WD mode Wheelsdriven 4WD
mode indicator light (
,
) Use
conditions
2WD Front
wheels:
The wheel drivemode isin
T wo-Wheel Drive(2WD)
when driving onanormal road.
*1 T
urn off For
driving ondry,
paved roads
AUT O Distribution
oftorque tothe
front andrear wheels changes
automatically ,depending on
road conditions encountered
[ratio; 100:0 (2WD) ?50 :
50 (4WD)]. Thisresults in
improved drivingstability . Illuminates
For driving onpaved or
slippery roads
L OCK Four-Wheel
Drive(4WD)
*2*3* Illuminate
/
For driving onrough
roads
*1: The2WD mode maychange tothe 4WD mode automatically dependingonthe driving condition. The4WD
mode indicator lightdoes notilluminate.
*2: TheLOCK mode willchange tothe AUT Omode automatically whenthevehicle hasbeen driven atahigh
speed. The4WD LOCK indicator lightturns off.
*3: TheLOCK mode willautomatically becancelled whentheignition switchisplaced inthe ªOFFº position.
4WD shifttips
T32A130827- 36A0B76C-CF 6C-4546-B388-BD02E B8DB6F1
. Ifthe 4WD mode switch isoperated whilemaking
a turn, accelerating ordecelerating, orifthe
ignition switchisturned offwhile inthe AUT Oor
L OCK mode, youmay feelajolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously operated
under conditions wherethedifference inrotation
between thefront andrear wheels islarge (wheel
slip) ,such aswhen driving thevehicle onrough
roads through sandormud orwhen freeing a
stuck vehicle. Inthese cases, theª4WD High
T emp. Stopvehicleº warning appears andthe
4WD mode changes tothe 2WD mode toprotect
the power trainparts. Ifyou stop driving withthe
engine idlinginasafe place andwait until the
ª4WD HighTemp. Stopvehicleº warning disap-
pears, the4WD returns tothe mode previously
selected.
. Brake distance inthe 4WD mode isthe same as
2WD.
CAUTION:
. Depending onthe driving condition, the4WD
mode mayautomatically changefrom2WD
to 4WD even when the2WD mode is
selected. Ifthis occurs whiledriving, the
4WD mode indicator lightwillnotilluminate.
. Donot start theengine withthe4WD mode
switch inany mode inthe following cases:
Ð when thevehicle isplaced onafree-
roller orjacking upthe vehicle withthe
front tiresraised andtherear tires on
the ground.
Starting anddriving
5-23
&RQGLWLRQ
([FHSWIRU&KLQD