stop start NISSAN X-TRAIL 2011 User Guide


> (GLW    0RGHO 7$@
2-36
Instrument sand controls
14. Chassis control
GUID-869FF35 8-E269-4A5A-BA18-1921FD93603F
When Active Trace Control, ActiveEngine Brakeor
Active RideControl systemisoperated, itshows the
operating condition. Italso shows operating condition
of Hill Start Assist orthe Hill Descent Control.See
ª Active Trace Controlº (P.5-28) ,ªActive Engine Brake
(Continuously Variable Transmission (CVT)models)º
(P .5-28) ,ªActive RideControlº (P.5-29) ,ªHill Start
Assist systemº (P.5-30) orªHill descent control
systemº (P.5-30) formore details.
15. Tyre Pressures (ifequipped)
GUID-002 3E777-005 7-4349-9A1D -2E51F69EEB28
The tirepressure modeshows thepressure ofall four
tyres while thevehicle isdriven.
When theLow Tyre Pressure warningappears, the
display canbeswitched tothe tirepressure modeby
pushing theENTER switch
*
1
to reveal additional
details onthe displayed warning.
16. Driver Attention Alertsystem (ifequipped)
GUID-368 27261-8F9C- 4388-9529-475E767E1 48C
When theªDriver Attention Alertºdisplay isselected,
you can view yourattention levelasdetected bythe
system. Formore information seeªDriver Attention
Alertº (P.2-36) .
17. Stop/Start SystemorIdling StopSystem
(if equipped)
GUID-258D32 65-C574-4352-9FED-EB2 19DF828CE
The Stop/Start SystemorIdling StopSystem mode
shows theCO2 orfuel savings andtheengine stop
time. (See ªStop/Start SystemorIdling StopSystemº
(P .5-18) .)
T rip CO2 orfuel saving andengine stoptime:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The tripCO2 orfuel saving andengine stoptimemode
shows amount ofCO2 orfuel saved andtheengine
stop timesince thelast reset.
The CO2 orfuel saving andengine stoptimecanbe reset
bypushing theENTER switch
*
1
(T ype A)or
*
2
(T ype B)inthe ªStop/Startº menu.Formore
information, seeªDisplay Settingsº (P.2-22) .
T otal CO2 orfuel saving andengine stoptime:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The total CO2 orfuel saving andengine stoptime
mode shows:
. Theestimated CO2exhaust emissions prevented.
(for Europe andSouth Africa)
. Theestimated quantityofsaved fuel.(forAustralia
and New Zealand)
. The time thattheengine hasbeen stopped forby
the Stop/Start SystemorIdling StopSystem.
NO TE:
The Total CO2 orfuel saving andengine stop
time values cannot bereset andshow accumu-
lated Stop/Start SystemorIdling StopSystem
information sincethevehicle wasbuilt.
18. Traffic SignRecognition (ifequipped)
GUID-C22 DF58C-CD4 7-45F9-8CFC-2B5D3E 42F62D
The Traffic SignRecognition (TSR)system provides
the driver withinformation aboutthemost recently
detected speedlimit.Formore details, seeªTraffic
Sign Recognitionº (P.2-37) .
CL OCK ANDOUTSIDE AIRTEMPERA TURE
GUID-E2 7E1606-2B 37-4B43-92B1-ED034 9E35346
JVI0932X
The clock
*
1
and outside airtemperature
*
2
are
displayed onthe upper sideofthe vehicle information
display .
Clock
T32A1308 27-CA60079E -C0A7-4156-9588-074 D8F0DC1C9
For clock adjustment, seeªClockº (P.4-6) orªAudio
settingsº (P.4-58) .
Outside airtemperature (8Cor8F )
GUID-78 85796A-D26 4-4AB0-9D1B-EA2294C0 88A3
The outside airtemperature isdisplayed in8C or8F in
the range of


> (GLW    0RGHO 7$@
tired. Failure todo socould cause youtolose
control ofthe vehicle, resulting inaserious
accident.
System operation
GUID-0B 3AD093-EEF1-40B9-86 95-B2ABA1B 786CC
JVI0991X
If the system detects thatdriver attention isdecreas-
ing, themessage ªTimeforadriver break?º appears in
the vehicle information displayandabuzzer sounds
when thevehicle isdriven atspeeds above60km/h
(37 MPH) .
Attention levelindicator:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVI0992X
When theªDriver attentionº displayisselected, you
can view yourattention levelasdetected bythe system.
For more information seeªSettingsº (P.2-21) .
NO TE:
. The attention levelindicator consistsof
eight levels.
. When stopping theengine, thesystem is
reset.
T urning theDriver Attention Alertsystem on
and off
GUID-CA EA4B27-0BBE-4 162-989F-3A0A3B28B80C
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
NO TE:
The setting willberetained evenifthe engine is
restarted.
System Malfunction
GUID-9B328 11F-1E3D-485A-BE8E-B EE91D110087
If the Driver Attention Alertsystem malfunctions, the
system warning message willappear inthe vehicle
information displayandthefunction willbestopped
automatically .
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Stop thevehicle inasafe location, andthen turnoff
and restart theengine. Ifthe system warning message
continues toappear, havethesystem checked bya
NISSAN dealer.
TRAFFIC SIGNRECOGNITION (ifequipped)
GUID-B4 DC19B1-EA1 A-43B9-940E-735647D4C 6F8
JVI0975X
The Traffic SignRecognition (TSR)system provides
the driver withinformation aboutthemost recently
detected speedlimit.Thesystem captures theroad
sign information withthemulti-sensing frontcamera
unit
*
1
located onthe windshield infront ofthe inside
rearview mirroranddisplays thedetected signsinthe
vehicle information display.For vehicles equipped with
navigation system,thespeed limitdisplayed isbased
on acombination ofnavigation systemdataandlive
camera recognition. TSRinformation isalways dis-
played atthe top ofthe vehicle information display,and
optionally inthe main central areaofthe display screen.
WARNING:
The TSR system isonly intended tobe asupport
device toprovide thedriver withinformation. It
is not areplacement forthe driver's attention to
traffic conditions orresponsibility todrive
safely. Itcannot prevent accidents duetocare-
lessness. Itis the driver's responsibility tostay
alert anddrive safely atall times.
Instrume ntsand controls
2-37
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T urning theTSR system onand off
GUID-1E6BCB F6-FF04-4185-8DA1-454630A7E 519
T urning theLDW system onoroff isdone using the
[Settings] menuinthe vehicle information display.For
details, seeªVehicle information displayº(P.2-20) .
Perform thefollowing stepstoenable ordisable the
TSR system:
1. Inthe [Settings] menu,selectthe[Driver Assis-
tance] key.
2. Touch [Traffic Sign] toturn thesystem ON/OFF .
System temporarily unavailable
GUID-BA4 EC994-FA78-43F4- 8A11-6FA33E2CC5A 5
If the vehicle isparked indirect sunlight underhigh
temperature conditions(overapproximately 408C
(1048F )and then started, theTSR system maybe
deactivated automatically.The [Not available high
cabin temperature] warningmessage willappear in
the vehicle information display.
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theinterior temperature isreduced, theTSR
system willresume operating automatically .
System Malfunction
GUID-CB9 A153C-B940 -4796-BEC6-E0CED93B2 DA4
If the TSR system malfunctions itwill beturned off
automatically andthesystem [Malfunction]/[System
error] warning message willappear inthe vehicle
information display.
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the TSR [Malfunction]/[System error]message
appears, pulloffthe road atasafe location andstop
the vehicle. Turn theengine offand restart theengine.
If the TSR [Malfunction]/[System error]message
continues toappear, havethesystem checked bya
NISSAN dealer.
Maintenance
GUID-40 11F179-FB B0-4982-88ED-C90E38 F62B76
The TSR uses thesame multi-sensing frontcamera
unit that isused bythe Lane Departure Warning
(LDW) system, locatedinfront ofthe interior rearview
mirror. Formaintenance ofthe camera, seeªMulti-
sensing cameraunitmaintenanceº (P.5-41) .
T32A1308 27-AE66DA 86-EADA-49 AF-BE4F-98EA59F26D 29
HEADLIGHT SWITCH
T32A130 827-2D453 01A-C88C-4 C7B-B333-62ABD6D57 6C9
JVI0854X
T ype A
JVI0859X
T ype B
NISSAN recommends thatyouconsult thelocal
regulations concerning theuse oflights.
position
T32A1308 27-22A6378 D-658B-4901-AA34-6B6 32DCB958D
The
position turnsonthe front clearance, tail,
license plateandinstrument panellights.
Instrume ntsand controls
2-39
HEADLIGHT
ANDTURN SIGNAL
SWIT CH
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-50
Instrument sand controls
The defogger isused toreduce themoisture, fogor
frost onthe rear window andoutside doormirror (if
equipped) surfacetoimprove therear view.
When thedefogger switchispushed, theindicator
light
*
A
illuminates andtherear window defogger
operates forapproximately 15minutes. Afterthepreset
time haspassed, thedefogger willturn offautomati-
cally .
T o turn offmanually ,push thedefogger switchagain.
CAUTION:
. When operating thedefogger continuously,
be sure tostart theengine. Otherwise, itmay
cause thebattery todischarge.
. When cleaning theinner sideofthe window,
be careful nottoscratch ordamage the
electrical conductors onthe surface ofthe
window.
NO TE:
When therear defogger isturned on,the Stop/
Start System orIdling StopSystem (ifequipped)
will notbeactivated.
T32A130827- 00D4E9A3-D73F-4C95-82A9-CA964 C18969F
JVI0851X
The horn switch operates regardless ofthe ignition
switch position exceptwhenthebattery isdischarged.
When thehorn switch ispushed andheld, thehorn will
sound. Releasing thehorn switch willcease thehorn
sound.
T32A1308 27-5DF6A5BA -A5E1-4D32-A1B7-F6 FB2C3D4E69
POWER WINDOWS
T32A130827-9 35286CD-5D98-4FE4-91F9-05502 586F0C5
WARNING:
. Make surethatallpassengers havetheir
hands, etc.inside thevehicle beforeoperat-
ing the power windows.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Theycould unknowingly
activate switches orcontrols andinadver-
tently become involved inan accident.
The power windows operatewhentheignition switch
is in the ªONº position.
T o open awindow ,push down thepower window
switch.
T o close awindow ,pull upthe power window switch.
Driver's window switch
T32A130827-A3 DBA208-DFC4-49E6-92A1-F83F1 136BDC1
SIC4522
The driver's switch,themain switch, cancontrol all
windows.
HORN WINDOWS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-16
Pre-driving checksandadjustments
TROUBLESHOO TINGGUIDE
T32A1308 27-D271D 359-A932-46 DB-8333-9B39CD617627
Symptom Possible cause Action
totake
When pushing theignition switchtostop
the engine The
Shift toPark warning appears onthe
vehicle information displayandtheinside
warning chimesounds continuously or
for afew seconds. (Continuously Variable
T ransmission models) The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªOFFº
position. Close
thedoor securely .
When closing thedoor aftergetting out
of the vehicle The
Key System Faultwarning inthe
meter blinks inyellow ,the outside chime
sounds 3times andtheinside warning
chime sounds forafew seconds. The
ignition switchisin the ªONº
position. Place
theignition switchinthe ªOFFº
position.
The Shift toPark warning appears onthe
vehicle information displayandtheout-
side chime sounds continuously .(Con-
tinuously Variable Transmission models)The
ignition switchisin the ªOFFº
position andtheshift lever isnot inthe
ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andplace theignition switchin
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Close
thedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Key System Faultwarning inthe
meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªBatteryº (P.8-20) .)
The Key System Faultwarning inthe
meter blinks inyellow andtheinside
warning chimesounds forafew seconds. The
Intelligent Key isnot inthe vehicle. Carry
theIntelligent Key with you.
When pushing theignition switch The
Key System Faultwarning inthe
meter illuminates inyellow . It
warns ofamalfunction withthe
electrical steeringlocksystem orthe
Intelligent Key system. Contact
aNISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OPENING HOOD
T32A1308 27-335B9F3 6-A2B6-4F60-8C88-243 636A15C7A
JVP0288X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
grille, andpush thelever sideways withyour
fingertips.
3. Raise thehood.
4. Remove thesupport rodand insert itinto theslot
*
3
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
T32A130827- 25073346-5A1D-4F8E-8 B28-82B4A41B9CC7
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
T32A130827- 405C1781-AE 61-4D43-A40E-A626866CFB76
WARNING:
. Always besure theback doorhasbeen
closed securely toprevent itfrom opening
while driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle. SeeªPrecautions
when starting anddrivingº (P.5-3) forex-
haust gas.
. Donot leave children unattended insidethe
vehicle. Theycould unknowingly activate
switches orcontrols. Unattended children
could become involved inserious accidents.
. Always besure thathands andfeet areclear
of the door frame toavoid injury while
closing theback door.
OPERA TINGMANUAL BACKDOOR
GUID-3A35 60E3-6F46-4 D3E-8487-69C8562C7AD 6
JVP0281X
T o open theback door, unlock itand push theopener
switch
*
A
. Pull upthe back doortoopen.
The back doorcanbeunlocked by:
Pre-driving checksandadjustments
3-23
BACK
DOOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-30
Pre-driving checksandadjustments
T32A1308 27-3EAB989 7-9B0B-47AB-BC92-A0FAB01FF 312
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious accident.
PEDAL TYPE
GUID-29 9E5FC1-DA0 3-4467-8F83-07CADBC7 0ECA
SP A2331
T o apply theparking brake,firmlydepress theparking
brake pedal
*
1
.
T o release theparking brake,depress andhold thefoot
brake
*
2
and then fullydepress andrelease the
parking brakepedal
*
1
. Before
driving, besure thatthebrake warning lighthas
turned off.
SWIT CHTYPE (models withelectronic
parking brakesystem)
GUID-99B5D B44-0FAE-40C9 -84EB-B94A2 B3BC9A 2
JVP0310X
The electronic parkingbrakecanbeapplied or
released automatically orby operating theparking
brake switch.
Automatic operation
GUID-2CD5 BAA4-829D-4 ED2-907D-61D3F00A1872
The electronic parkingbrakeisautomatically applied
when theengine isturned offwith theignition switch
(for MTmodel) .
The electronic parkingbrakeisautomatically released
as soon asthe vehicle startswhiletheaccelerator
pedal isdepressed.
For CVT model, thedriver's seatbeltneeds tobe
fastened.
WARNING:
. The electronic parkingbrakewillnotbe
automatically appliedifthe engine is
stopped withoutusingtheignition switch
(for example, byengine stalling) . .
Before leaving thevehicle, movetheshift
lever tothe ª1º(1st) orªRº (Reverse) position
(for MTmodel) orªPº (Park) position (CVT
model) andcheck thattheelectronic parking
brake warning light
is illuminated to
confirm thattheelectronic parkingbrakeis
applied. Theelectronic parkingbrakewarn-
ing light willremain onfor aperiod oftime
after thedriver's doorislocked.
CAUTION:
When parking inan area where theoutside
temperature isbelow 08C (32 8F),do not apply
the parking braketoprevent itfrom freezing.
For safe parking, placetheshift lever inthe ª1º
(1st) orªRº(Reverse) position(forMTmodel) or
ªPº (Park) position (CVTmodel) andsecurely
block thewheels.
NO TE:
. To keep theelectronic parkingbrakere-
leased aftertheengine isturned off,place
the ignition switchinthe ªOFFº position,
depress thebrake pedalandpush down the
parking brakeswitch before opening the
driver's door.
. Ifamalfunction occursinthe electric park-
ing brake system (forexample, dueto
battery discharge) ,contact aNISSAN dealer.
P ARKING BRAKE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Manual operation
GUID-904 D853F-51E6-4 D60-943F-53D00450A7A9
The electronic parkingbrakewillnotbeautomatically
applied ifthe engine isstopped withoutusingthe
ignition switch(forexample, byengine stalling) .In such
a case, youhave toapply theparking brakemanually .
T o apply: Pulltheswitch up
*
1
. The indicator light
*
A
will illuminate.
T o release: Withtheignition switchinthe ªONº
position, depressthebrake pedalandpush theswitch
down
*
2
. The indicator light
*
A
will turn off.
Before driving, checkthattheelectronic parkingbrake
warning light
goes out.Foradditional information,
see ªWarning/indicator lightsandaudible remindersº
(P .2-12) .
NO TE:
. Abuzzer willsound ifthe vehicle isdriven
without releasing theparking brake.See
ª Audible remindersº (P.2-19) .
. While theelectronic parkingbrakeisapplied
or released, anoperating soundisheard
from thelower sideofthe rear seat. Thisis
normal anddoes notindicate amalfunction.
. When theelectronic parkingbrakeisfre-
quently applied andreleased inashort
period oftime, theparking brakemaynot
operate inorder toprevent theparking
brake system fromoverheating. Ifthis
occurs, operate theelectronic parkingbrake
switch againafterwaiting approximately 1
minute.
. Ifthe electronic parkingbrakemustbe
applied whiledriving inan emergency, pull
up and hold theparking brakeswitch. When
you release theparking brakeswitch, the
parking brakewillbereleased. .
While pulling upthe electronic parking
brake switch during driving, theparking
brake isapplied andachime sounds. The
electronic parkingbrakewarning lightinthe
meter andinthe parking brakeswitch
illuminate. Thisdoes notindicate amalfunc-
tion. Theelectronic parkingbrakewarning
light inthe meter andinthe parking brake
switch turnoffwhen theparking brakeis
released.
. When pulling theelectronic parkingbrake
switch upwith theignition switchinthe
ªOFFº orªACCº position, theparking brake
switch indicator lightwillcontinue toillumi-
nate forashort period oftime.
When towing atrailer (forAustralia, New
Zealand, SouthAfricaandEurope)
GUID-D10 4E447-6887-4 FAC-B2E9-1 062DDCEF362
Depending onthe weight ofthe vehicle andtrailer and
the steepness ofthe slope, theremaybeatendency
for the vehicle tomove backwards whenstarting froma
standstill. Whenthisoccurs, youcan usetheparking
brake switch inthe same wayasaconventional lever
type parking brake.
Before starting onsloping roadswhentowing atrailer,
be sure toread thefollowing toprevent thevehicle
from moving backward unintentionally .
1. Pull and hold theparking brakeswitch while
depressing theaccelerator pedalandengaging
the clutch (MTmodels) .
2. Release theparking brakeswitch assoon asthe
engine isdelivering enoughtorquetothe wheels.
Pre-driving checksandadjustments
3-31
&RQGLWLRQ
([FHSWIRU&KLQD