recommended oil NISSAN X-TRAIL 2011 Owners Manual


> (GLW    0RGHO 7$@
2-30
Instrument sand controls
seat passenger's seatbeltisfastened. Thewarning will
automatically turnoffafter approximately 35seconds.
For precautions onseat beltusage, seeªSeat beltsº
(P .1-9) .
13. Key System Faultwarning (ifequipped)
GUID-459 08843-CF F4-4CCD-81A0 -E6055843EF07
This warning appears ifthere isamalfunction inthe
Intelligent Key system.
If this warning appears whiletheengine isstopped, the
engine cannot bestarted. Ifthis warning appears while
the engine isrunning, thevehicle canbedriven.
However, contactaNISSAN dealerforrepair assoon
as possible.
14. Low tyrepressure warning(ifequipped)
GUID-CC 56E22C-950B-4BAA-A C18-501ADE36070 4
This warning (ªLowtyrepressureº andavehicle icon-
if equipped) appearswhenthelow tirepressure
warning lightinthe meter illuminates andlowtire
pressure isdetected. Thewarning appears eachtime
the ignition switchisplaced inthe ªONº position as
long asthe low tirepressure warninglightremains
illuminated. Ifthis warning appears, stopthevehicle
and adjust thepressure tothe recommended COLD
tire pressure shownonthe tireplacard. (SeeªLow tire
pressure warninglightº(P.2-14) ,ªTire Pressure
Monitoring System(TPMS)º (P.6-2) .), ªTire Pressure
Monitoring System(TPMS)º (P.5-4) andªTire Pressure
Monitoring System(TPMS)º (P.8-36) .
15. Tyre pressure systemfaultwarning (if
equipped)
GUID-7E94 FFB8-85BA-407E-86E9-3 5D4440D31BF
This warning illuminates whenthereisaproblem with
the Tyre Pressure Monitoring System(TPMS).
If this warning comeson,have thesystem checked by
a NISSAN deale.SeeªLow tirepressure warninglightº
(P .2-14) ,ªTire Pressure Monitoring System(TPMS)º
(P .6-2) .), ªTire Pressure Monitoring System(TPMS)º (P
.5-4) andªTire Pressure Monitoring System(TPMS)º
(P .8-36) .
16. Low oilpressure Stopvehicle warning (if
equipped)
GUID-488 6D40C-6E1 C-481A-B24B-9147222D4154
This warning appears iflow engine oilpressure is
detected. Ifthe warning appears duringnormal driving,
pull offthe road inasafe area, stoptheengine
immediately andcallaNISSAN dealer.
The lowoilpressure warningisnot designed to
indicate alow oillevel. Usethedipstick tocheck theoil
level. (SeeªEngine oilº(P.8-10) .)
CAUTION:
Running theengine withtheengine oilpressure
warning displayed couldcause serious damage
to the engine.
17. OilLevel Lowindicator (fordiesel engine
model)
GUID-44E 8C9EE-A55 0-4578-B0BC-CD9597E 9BFCC
If the low level indicator isdisplayed, theengine oil
level islow .If the low level reminder isdisplayed, check
the level using theengine oildipstick. (SeeªEngine oilº
(P .8-10) .)
CAUTION:
The oillevel should bechecked regularly using
the engine oildipstick. Operating withan
insufficient amountofoil can damage the
engine andsuch damage isnot covered bythe
warranty.
18. Oillevel sensor warning (fordiesel engine
model)
GUID-FCC1 D74A-FEA2-43E8-A09D -25FAB64B72FF
If the oilsensor warning isdisplayed, theengine oil
level sensor maybemalfunctioning. ContactaNISSAN
dealer immediately .For more details, seeªOil control
system (fordiesel engine model)º (P.2-33) .
19. 4WD system faultwarning (ifequipped)
GUID-74 4F018D-B3A0 -46B9-98CE-8F22CB584F E0
This warning appears whenthefour-wheel drive
(4WD) system isnot functioning properlywhilethe
engine isrunning. Reducevehiclespeedandhave your
vehicle checked byaNISSAN dealer.Seeª4WD
warningº (P.5-24) .
20. 4WD HighTemp. Stopvehicle warning (if
equipped)
GUID-B3 B19D8E-F28 0-4789-825F-5EC947 8A9881
This warning mayappear whiletrying tofree astuck
vehicle duetoincreased oiltemperature. Thedriving
mode maychange toTwo-Wheel Drive(2WD) .If this
warning isdisplayed, stopthevehicle withtheengine
idling, assoon asitis safe todo so. Then ifthe warning
turns off,you can continue driving.Seeª4WD
warningº (P.5-24) .
21. Tyre size incorrect warning(ifequipped)
GUID-C17 9A579-3869 -4DBE-B200-742582D81A9F
This warning mayappear ifthere isalarge difference
between thediameters ofthe front andrear wheels
and tires. Pulloffthe road inasafe area, withthe
engine idling.Check thatallthe tiresizes arethesame,
that thetirepressure iscorrect andthat thetires are
not excessively worn.Seeª4WD warningº (P.5-24) .
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-6
Starting anddriving
from thetire pressure sensors,andthe
TPMS willnotfunction properly.
Some devices andtransmitters maytemporarily inter-
fere with theoperation ofthe TPMS andcause thelow
tire pressure warninglighttoilluminate. Someexam-
ples are:
. Facilities orelectric devices usingsimilar radio
frequencies arenear thevehicle.
. Ifatransmitter settosimilar frequencies isbeing
used inor near thevehicle.
. Ifa computer (orsimilar equipment) oraDC/AC
converter isbeing usedinor near thevehicle.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
TPMS resetting
GUID-F7 6622F1-0B9 8-4141-BFE3 -22038209B548
T o keep theTPMS functioning properly,the reset
operation mustbeperformed inthe following cases.
. when thetirepressure isadjusted
. when atire orawheel isreplaced
. when thetires arerotated
Perform thefollowing procedures toreset theTPMS.
1. Park thevehicle inasafe andlevel place.
2. Apply theparking brakeandplace theshift lever in
the ªPº (Park) position.
3. Adjust thetire pressure onallfour tires tothe
recommended COLDtirepressure shownonthe
tire placard. Useatire pressure gaugetocheck
the tirepressure.
4. Place theignition switchinthe ªONº
position.
JVS0434X
Steering-wheel- mountedcontrols(leftside)
5. Use the
switch
*
1
until ªSettingsº appears,
and press ENTER
*
1
.
6. Use the
switch
*
1
until ªTire Pressuresº is
selected, andpress ENTER
*
1
.
7. Use the
switch
*
1
until ªCalibrateº is
selected, andpress ENTER
*
1
. 8.
Use the
switch
*
1
until ªStartº isselected,
and press ENTER
*
1
to reset theTPMS. When
the TPMS resetting starts,themessage ªTPMS
resettingº willbedisplayed.
9. After resetting theTPMS, drivethevehicle for
several minutes atspeeds above25km/h (16
MPH) .
If the low tirepressure warninglightilluminates after
the resetting operation, itmay indicate thattheTPMS
is not functioning properly.Have thesystem checked
by aNISSAN dealer.
For information regardingthelow tirepressure warning
light, seeªLow tirepressure warninglightº(P.2-14) .
DIESEL PARTICULA TEFILTER (DPF) (if
equipped)
GUID-5A9 CD1A0-AAA1 -48F8-8DC8-EB7CA86C2 ADF
WARNING:
. Becareful nottoburn yourself withexhaust
gases.
. Do not park thevehicle overflammable
materials suchasdry grass, wastepaperor
rags, asthey mayburn easily.
. Use thespecified engineoilfor Diesel
Particulate Filter(DPF) equipped models.
For details, seeªRecommended Fluids/lu-
bricants andcapacitiesº (P.9-2) .
CAUTION:
The DPF becomes extremely hotafter burning
particulate matter.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Removing tire
T32A1308 27-9C9287 25-DE13-45 24-B106-43C BCA933524
1. Remove thewheel nuts.
2. Remove thedamaged tire.
CAUTION:
The tireisheavy. Besure thatyour feetareclear
from thetire and usegloves asnecessary to
avoid injury.
INST ALLING SPARE TIRE
T32A1308 27-435AF232-C329 -432F-8AAD-7 473B8100EC 2
SCE0039
WARNING:
. Never usewheel nutswhich arenot provided
with your vehicle. Incorrect wheelnutsor
improperly tightenedwheelnutsmaycause
the wheel tobecome looseorcome off.This
could cause anaccident.
. Never useoilorgrease onthe wheel studs
or nuts. Thismaycause thewheel nutsto
become loose.
. The T-type spare tireisdesigned foremer-
gency useonly. 1.
Clean anymud ordirt from thesurface between
the wheel andhub.
2. Carefully putthespare tireonand tighten the
wheel nutswithyour fingers. Checkthatallthe
wheel nutscontact thewheel surface horizontally .
3. Tighten thewheel nutsalternately andevenly in
the sequence illustrated(
*
1
-
*
5
) , more than2
times withthewheel nutwrench, untilthey are
tight.
4. Lower thevehicle slowlyuntilthetire touches the
ground.
5. Tighten thewheel nutssecurely ,with thewheel
nut wrench, inthe sequence illustrated.
6. Lower thevehicle completely .
Tighten thewheel nutstothe specified torque
with atorque wrench assoon aspossible.
Wheel nuttightening torque:
108 N´m (11kg-m, 80ft-lb)
The wheel nutsmust bekept tightened to
specification atall times. Itis recommended
that thewheel nutsbetightened tospecification
at each lubrication interval.
WARNING:
Retighten thewheel nutswhen thevehicle has
been driven for1,000 km(600 miles) (alsoin
cases ofaflat tire, etc.).
For models equipped withTirePressure
Monitoring System(TPMS)
GUID-16DE 3A91-C3BF -444C-BA0B-738A18EB BE53
. After adjusting thetire pressure, theTPMS must
be reset. SeeªTire Pressure Monitoring System
(TPMS)º (P.6-2) ,ªTire Pressure Monitoring Sys-
tem (TPMS)º (P.5-4) andªTire Pressure Monitor-
ing System (TPMS)º (P.8-36) fordetails aboutthe
resetting procedure.
. After adjusting tirepressure tothe COLD tire
pressure, thedisplay ofthe tire pressures (if
equipped inthe vehicle information display)may
show higher pressure thantheCOLD tire
pressure afterthevehicle hasbeen driven more
than 1.6km(1mile) .This isbecause thetire
pressurizes asthe tire temperature rises.This
does notindicate asystem malfunction.
ST OWING DAMAGED TIREANDTOOLS
T32A1308 27-5EF8CC3 C-3891-4896-8173-496E49108424
WARNING:
. Besure thatthetire, jack andtools usedare
properly storedafteruse.Such items can
become dangerous projectilesinan accident
or sudden stop.
. The T-type spare tireisdesigned foremer-
gency useonly.
1. Securely storethedamaged tire,jack andtools
used inthe storage areainthe reverse orderof
removal. (SeeªPreparing toolsandspare tireº
(P .6-3) .)
2. Replace theluggage floorboards.
3. Close theback door.
In case ofemergency
6-7
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
7-2
Appear anceandcare
T32A1308 27-B546E8 D4-F62E-4E44-86B7-FD A25D20C022
In order tomaintain theappearance ofyour vehicle, itis
important totake proper careofit.
Whenever possible,parkyourvehicle insideagarage
or inacovered areatominimize thechances of
damaging thepaint surface ofyour vehicle.
When itis necessary topark outside, parkinashady
area orprotect thevehicle withabody cover. Be
careful nottoscratch thepaint surface when
putting onorremoving thebody cover.
W ASHING
T32A130827-7 5EA71EE-82C3-45D9-8 9B6-534587A2F13A
In the following instances, washyourvehicle assoon
as possible toprotect thepaint surface:
. After arainfall, whichmaycause thepaint surface
damage fromacidrain.
. After driving oncoastal roads,whichmaycause
rusting fromthesea breeze.
. When contaminants suchassoot, birddroppings,
tree sap, metal particles orbugs getonthe paint
surface.
. When dustormud builds uponthe paint surface.
1. Wash thevehicle surface withawet sponge and
plenty ofwater.
2. Clean thevehicle surface gentlyandthoroughly
using amild soap, aspecial vehiclesoapora
general purpose dishwashing liquidmixed with
clean, lukewarm (neverhot)water.
CAUTION:
. Donot wash thevehicle withstrong house-
hold soap, strong chemical detergents, ga-
soline orsolvents.
. Donot wash thevehicle indirect sunlight or
while thevehicle bodyishot, asthe paint
surface maybecome water-spotted. .
Avoid usingtight-napped orrough cloths,
such aswashing mitts.Caremust betaken
when removing caked-ondirtorother for-
eign substances sothe paint surface isnot
scratched ordamaged.
3. Rinse thevehicle thoroughly withplenty ofclean
water.
4. Use adampened chamoistodry the paint surface
and avoid leaving waterspots.
When washing thevehicle, takecare ofthe following:
. Inside flanges, jointsandfolds onthe doors,
hatches andhood areparticularly vulnerabletothe
effects ofroad salt.Therefore, theseareasmust
be cleaned regularly.
. Besure thatthedrain holes inthe lower edgeof
the doors arenot clogged.
. Spray watertothe underbody andinthe wheel
wells toloosen thedirt and/or washawayroad
salt.
REMOVING SPOTS
T32A1308 27-D69C8C6 E-23D2-464A-971C-BACAC 95FCE20
Remove tarand oilspots, industrial dust,insects, and
tree sapasquickly aspossible fromthepaint surface
to avoid lasting damage orstaining. Specialcleaning
products areavailable ataNISSAN dealerorany
automotive accessorystore.
W AXING
T32A130827- D9B96C11-516D-48E7- 8EEB-9F4E4A00E581
Regular waxingprotects thepaint surface andhelps
maintain anew vehicle appearance.
After waxing, polishing isrecommended toremove
built-up residueandtoavoid aweathered appearance.
A NISSAN dealercanassist youinchoosing the
appropriate waxingproducts.
CAUTION:
. Wash yourvehicle thoroughly andcomple-
tely before applying waxtothe paint surface.
. Always followthemanufacturer's instruc-
tions supplied withthewax.
. Donot use awax containing anyabrasives,
cutting compounds orcleaners thatmay
damage thevehicle finish.
Machine compounding oraggressive polishingona
base coat/clear coatpaint finish maydullthefinish or
leave swirlmarks.
GLASS
T32A130 827-EF64A8 17-F9D8-41D 9-9211-AFD2A86FD09E
Use glass cleaner toremove smokeanddust filmfrom
the glass surfaces. Itis normal forglass tobecome
coated withafilm after thevehicle isparked inthe hot
sun. Glass cleaner andasoft cloth willeasily remove
this film.
CLEANING EXTERIOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-10
Maintenance anddo-it-yours elf
T32A1308 27-7FBFDE4 2-D934-4EBF-A456-15EF83DB52F C
CHECKING ENGINEOILLEVEL
T32A1308 27-832AD9AE -E088-46FB-B20C-AC C097451A7F
JVM0423X
QR25 andMR20 engine
JVM0435X
R9M engine
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Remove thedipstick andwipe itclean. 6.
Reinsert thedipstick allthe way.
7. Remove thedipstick andcheck theoillevel. It
should bewithin therange
*
C
.
8. Ifthe oillevel isbelow
*
A
, remove theoilfiller cap
and pour therecommended oilinto theopening.
Do not overfill
*
B
.
When fillingtheengine oil,donot remove
the dipstick.
9. Recheck theoillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -in
period, depending onthe severity ofoperat-
ing conditions.
CAUTION:
The oillevel should bechecked regularly.
Operating yourvehicle withaninsufficient
amount ofoil can damage theengine, andsuch
damage isnot covered bythe warranty.
CHANGING ENGINEOILAND OILFILTER
T32A130827- 17863BB7-3386-4EB2-B54 2-3228E21833C2
WARNING:
. Used oilmust bedisposed ofproperly. Never
pour ordump oilinto theground, canals,
rivers, etc.It should bedisposed ofatproper
waste facilities. NISSANrecommends hav-
ing your oilchanged byaNISSAN dealer.
. Be careful nottoburn yourself, asthe
engine oilmay behot.
. Prolonged andrepeated contactwithused
engine oilmay cause skincancer.
. Avoid directskincontact withused oil.If
contacted, washthoroughly withsoap or hand
cleaner andplenty ofwater assoon as
possible.
. Store usedengine oilinmarked containers
out ofthe reach ofchildren.
V ehicle set-up
GUID-EF 5792C3-0A80 -4BDF-944F-8C21E6 FF05DC
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Raise andsupport thevehicle usingasuitable
floor jackandsafety jackstands.
.
Place thesafety jackstands underthevehicle
jack -up points.
.
A suitable adaptershouldbeattached tothe
jack stand saddle.
6. Remove theplastic engine undercover (if
equipped) .
.
Remove theplastic clipsfromtheundercover.
Engine oiland filter
T32A1308 27-6F86E2B7-D38C-4 534-AFED-674BD03BA210
QR25DE andMR20DD engine:
ENGINE OIL
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-22
Maintenance anddo-it-yours elf
.
Make surethatthe+side faces thebottom of
the case
*
B
.
3. Close thelidsecurely .
4. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
INTELLIGENT KEYBATTER Y
T32A130827-0 795585A-4590-40CB-B 4DD-549A1FA4DDE8
Battery replacement
T32A1308 27-C7C6166A -C4F7-4BA4-94AA-A78E88 2D4D47
CAUTION:
. Becareful nottoallow children toswallow
the battery andremoved parts.
. Animproperly disposedbatterycanharm
the environment. Alwaysconfirm localreg-
ulations forbattery disposal.
. When changing batteries, donot letdust or
oil get onthe components.
. There isdanger ofexplosion ifthe lithium
battery isincorrectly replaced.Replaceonly
with thesame orequivalent
type.
JVM0317X
T o replace thebattery:
1. Release thelock knob atthe back ofthe key and
remove themechanical key.(See ªMechanical
keyº (P.3-4) .)
2. Insert aflat-blade screwdriver wrappedwitha
cloth intotheslitofthe corner andtwist itto
separate theupper partfrom thelower part.
3. Replace thebattery withanew one.
.
Recommended battery:CR2032 orequivalent
.
Do not touch theinternal circuitandelectric
terminals asdoing socould cause amalfunc-
tion.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
9-2
T echnical information
T32A1308 27-1F547A41- 0690-4B8E-BA96-B9DA7 D980C17
The following areapproximate capacities.Theactual refillquantities maybeslightly different. Whenrefilling, followtheprocedures instructedinthe ª8.Maintenance anddo-it-
yourselfº sectiontodetermine theproper refillcapacity .
Capacity (Approximate)
RecommendedFluidsandLubricants
Liter Imp
measure
Fuel 6013-1/4galSee
ªFuel informationº (P.9-4) .
Engine oil*
QR25DEWith
oilfilter change
4.6 4qt Gasoline
engine:
Except forKazakhstan, UkraineandSouth Africa
. Genuine NISSAN engineoil
. APIgrade: SL,SM orSN
. ILSAC grade:GF-3,GF-4orGF-5
For Kazakhstan, UkraineandSouth Africa
. Genuine NISSAN engineoil
. APIgrade: SL,SM orSN
. ILSAC grade:GF-3,GF-4orGF-5
. ACEA A1/B1, A3/B3,A3/B4, A5/B5,C2orC3
Diesel engine:
With Diesel Particulate filter
. Genuine NISSAN engineoil
. ACEA C4LOW SAPS, Viscosity SAE5W-30
Without DieselParticulate filter
. Genuine NISSAN engineoil
. ACEA A3/B4, Viscosity SAE5W-30
For additional information, seeªRecommended SAEviscosity numberº(P.9-
4) .
Drain
andrefill Withoutoilfilter
change 4.3
3-3/4
qt
MR20DD With
oilfilter change
3.83-3/8
qt
Without oilfilter
change 3.6
3-1/8
qt
R9M With
oilfilter change
5.54-7/8
qt
Without oilfilter
change
5.14-1/2
qt
Cooling system(withreservoir)
Total QR25DE
Except
forthe Mid-
dle East andSouth
Africa 8.2
7-1/4qtFor
Europe:
. Genuine NISSAN EngineCoolant orequivalent inits quality*
Except forEurope:
. Genuine NISSAN EngineCoolant (blue)orequivalent*
* Use Genuine NISSANEngineCoolant, orequivalent inits quality ,in order to
avoid possible aluminum corrosionwithintheengine cooling systemcaused
by the use ofnon-genuine enginecoolant.
Note thatanyrepairs forthe incidents withintheengine cooling
system whileusing non-genuine enginecoolant maynotbecovered
by the warranty evenifsuch incidents occurredduringthewarranty
period.
For
theMiddle East
and South Africa 9.0
7-7/8qt
MR20DD MT
model 8.57-1/2
qt
CVT model 8.77-5/8
qt
R9M MT
model 7.97
qt
CVT model 8.17-1/8
qt
Reservoir QR25DE
and
MR20DD Ð
0.853/4
qt
R9M Ð0.571/2
qt
Differential gearoil ÐÐ.
Genuine NISSAN Differential OilHypoid SuperGL-5 80W-90 orAPI
GL -5, Viscosity SAE80W-90
T ransfer oil ÐÐ.
Genuine NISSAN Differential OilHypoid SuperGL-5 80W-90 orAPI
GL -5, Viscosity SAE80W-90
RECOMMEN DEDFLUIDS/
LUBRICANTS ANDCAPACITIES
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Capacity (Approximate)
RecommendedFluidsandLubricants
Liter Imp
measure
Continuously Variable Transmission (CVT)fluid ÐÐ.
Genuine NISSAN CVTFluid NS-3
. Useonly Genuine NISSANCVTFluid NS-3. Using transmission
fluid other thanGenuine NISSANCVTFluid NS-3willdamage
the CVT ,which isnot covered bythe warranty.
Manual Transmission (MT)gearoil ÐÐR9M
engine:
. Genuine NISSANManualTransmission Fluid(MTF) HQMulti
75W-85 orequivalent
. IfGenuine NISSAN ManualTransmission Fluid(MTF) HQMulti 75W-
85 ishard toobtain, APIGL-4, Viscosity SAE75W-85 maybeused as
a temporary replacement. However,useGenuine NISSANgearoilas
soon asitis available.
MR20DD engine:
For Europe
. Genuine NISSANgearoil(Nissan MT-XZ Gear OilTL/JR type)
75W-80, orequivalent
. IfGenuine NISSANgearoil(Nissan MT-XZ Gear OilTL/JR type)isnot
available, APIGL-4+, Viscosity SAE75W-80 maybeused asa
temporary replacement. However,useGenuine NISSANgearoil
(Nissan MT-XZ Gear OilTL/JR Type) assoon asitis available.
Except forEurope
. Genuine NISSANManualTransmission Fluid(MTF) Chevron-
T exaco ETL8997B 75W-80orequivalent.
. IfGenuine NISSAN ManualTransmission Fluid(MTF) Chevron Texaco
ETL8997B isnot available, APIGL-4, Viscosity SAE75W-80 maybe
used asatemporary replacement. However,useGenuine NISSAN
Manual Transmission Fluid(MTF) Chevron Texaco ETL8997B assoon
as itis available.
Brake andclutch fluid Refill
tothe proper fluidlevel according tothe
instructions inthe ª8.Maintenance anddo-it-
yourselfº section. Except
forEurope, UkraineandKazakhstan
. Genuine NISSAN BrakeFluidorequivalent DOT3
For Europe, UkraineandKazakhstan
. Genuine NISSAN BrakeFluid,orequivalent DOT3orDO T4
Multi-purpose grease ÐÐNL
GI No. 2(Lithium soapbase)
Air conditioner systemrefrigerant ÐÐFor
Europe:
. HFO-1234yf (R-1234yf)
Except forEurope:
. HFC-134a (R-134a)
Air conditioner systemlubricants ÐÐFor
Europe:
. ND-OIL12
Except forEurope:
. ND-OIL8
* For additional information, seeªChanging engineoiland oilfilterº (P.8-10)
T echnical information
9-3
&RQGLWLRQ
([FHSWIRU&KLQD