ignition key NISSAN X-TRAIL 2013 Owner´s Manual


> (GLW    0RGHO 7$@
T32A1308 27-E3568F A0-1FCD-4E0B-9D9 A-62C1D62A8525
Utility vehicles haveasignificantly higherroll-
over ratethan other types ofvehicles.
They havehigher ground clearance thanpassenger
cars tomake themcapable ofperforming inawide
variety ofon-pavement andoff-road applications. This
gives themahigher center ofgravity thanordinary cars.
An advantage ofhigher ground clearance isabetter
view ofthe road, allowing youtoanticipate problems.
However, theyarenot designed forcornering atthe
same speeds asconventional passengercarsany
more thanlow-slung sportscarsaredesigned to
perform satisfactorily underoff-road conditions. Ifat all
possible, avoidsharp turnsorabrupt maneuvers,
particularly athigh speeds. Aswith other vehicles of
this type, failure tooperate thisvehicle correctly may
result inloss ofcontrol orvehicle rollover.
CAUTION:
. Donot drive ondry hard surface roadsin
LOCK mode.
. Driving ondry hard surface roadsinLOCK
mode maycause unnecessary noiseandtire
wear. NISSAN recommends drivinginthe
2WD orAUT Omode under theseconditions.
(Four-Wheel Drive(4WD) model)
See ªFour-Wheel Drive(4WD)º (P.5-22) formore
details.
T32A1308 27-FAEDCC51-0 3A5-46E8-A1B4-05F8A0ACFCB 0
Driving yourvehicle tofitthe circumstances isessential
for your safety andcomfort. Asadriver, youshould be
the one who knows besthowtodrive inthe given
circumstances.
ENGINE COLDSTART PERIOD
T32A1308 27-423ABF28-182C-45 32-8735-2CF508C400 B5
Due tothe higher engine speeds, whentheengine is
cold, extracaution mustbeexercised whenselecting a
gear during theengine warm-up periodafterstarting
the engine.
L OADING LUGGAGE
T32A130827- F90D098F-7D0F-487B-AF46-661F74A575F1
Loads andtheir distribution andtheattachment of
equipment (couplingdevices,roofluggage carriers,
etc.) willconsiderably changethedriving character-
istics ofthe vehicle. Your driving styleandspeed must
be adjusted according tothe circumstances.
DRIVING INWET CONDITIONS
T32A130827- 9C65E705-D46A-4F87-85ED-94B9DB9A0814
. Avoid accelerating orstopping suddenly.
. Avoid sharpturning orlane changing suddenly.
. Avoid following tooclose tothe vehicle infront.
When watercovers theroad surface withwater
puddles, smallwater streams, etc.,reduce speedto
prevent hydroplaning whichcancause skidding and
loss ofcontrol. Worn tires willincrease thisrisk.
DRIVING INWINTER CONDITIONS
T32A1308 27-707A43B C-7022-449E-80CD-6 02716C03D25
. Drive cautiously .
. Avoid accelerating orstopping suddenly.
. Avoid sharpturning orlane changing suddenly.
. Avoid sudden steering.
. Avoid following tooclose tothe vehicle infront.
T32A130 827-CBF49A 8A-33E0-4B19-A0C4-B073BA66DC FD
WARNING:
Never remove thekey orplace theignition
switch inthe ªLOCKº position whiledriving. The
steering wheelwilllock andcould cause the
driver tolose control ofthe vehicle. Thiscould
result inserious vehicledamage orpersonal
injury.
CONTINUOUSL YVARIABLE TRANSMIS-
SION (CVT)
GUID-605E 0183-46DA-4 BF9-90EB-D63F97C8E 225
JVS0409X
The ignition lockisdesigned sothat theignition switch
cannot beturned tothe ªLOCKº position untiltheshift
lever ismoved tothe ªPº (Park) position. Whenmoving
the ignition switchtothe ªLOCKº position, toremove
the key from theignition switch,makesuretheshift
lever isin the ªPº (Park) position.
When theignition switchcannot beturned tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Turn theignition switchslightly inthe ªONº
direction.
Starting anddriving
5-7
ON-P
AVEMENT ANDOFF-ROA D
DRIVING PRECAUTIONS CARE
WHEN DRIVING IGNITION
SWITCH(model without
intelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-8
Starting anddriving
3. Place theignition switchinthe ªLOCKº position.
4. Remove thekey.
If the ignition switchisturned tothe ªLOCKº position,
the shift lever cannot bemoved fromtheªPº (Park)
position. Theshift lever canbemoved ifthe ignition
switch isin the ªONº position withthefoot brake pedal
depressed.
The ªOFFº position
*
1
is between theªLOCKº and
ªONº positions, althoughitis not marked onthe
ignition switch.
MANUAL TRANSMISSION (MT)
T32A1308 27-AC9B641 D-BD35-4AF4-83C0-7458C9A972 F2
JVS0409X
The ignition switchincludes adevice thathelps
prevent accidental removalofthe key while driving.
The keycan only beremoved whentheignition switch
is in the ªLOCKº position.
1. Turn theignition switchslightly inthe ªONº
direction.
2. Place theignition switchinthe ªLOCKº position.
3. Remove thekey.
The ªOFFº position
*
1
is between theªLOCKº and
ªONº positions, althoughitis not marked onthe
ignition switch.
STEERING LOCK (ifequipped)
T32A1308 27-034768 C7-0064-46 14-AD37-661 7B6EE9A7F
T o lock steering wheel
T32A1308 27-96BC47 46-D027-4F2 F-BE51-24E0 F70F7D7C
1. Place theignition switchinthe ªLOCKº position.
2. Remove thekey,if it is inserted inthe ignition
switch.
3. Turn thesteering wheel1/6ofaturn clockwise
from thestraight upposition.
T o unlock steering wheel
T32A1308 27-238448 DA-E61D-4 230-BDC4-7 65C7822D857
1. Insert thekey into theignition switch.
2. Gently turntheignition switchwhilerotating the
steering wheelslightly rightandleft.
KEY POSITIONS
T32A1308 27-517E0B 80-0FCC-4E 32-84E7-A02 026650916
L OCK (OFF)/L OCK(ACC) (0)
T32A1308 27-1EECA4 4F-6B9C-469F-AD46-0 8410CAFDB 59
. The ignition keycan only beremoved atthis
position.
. Thesteering lock(ifequipped) canonly belocked
at this position.
. The electrical accessory poweractivates without
the engine turnedon.(ACC position)
OFF/OFF(ACC) (1)
T32A1308 27-E0306A2 A-B0CE-4142-9178-4D C58906EEE1
. The engine isturned offwith thesteering wheel
unlocked.
. The electrical accessory poweractivates without
the engine turnedon.(ACC position)
ON (2)
T32A1308 27-99608CE 7-C1A4-419A-AB31-5DED 98FA480D
The ignition systemandtheelectrical accessory power
activate withouttheengine turnedon.
ST ART (3)
T32A130 827-DC8716 CC-7528-494E-8851- 5E7C1C8FB 7AB
The engine starteractivates andtheengine willstart.
The ignition switch,whenreleased, willautomatically
turn tothe ªONº position.
CAUTION:
As soon asthe engine hasstarted, releasethe
ignition switchimmediately.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
GUID-A467 6F80-7282-4 B00-8821-9F149B55F8E E
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-086 E9D42-2B5 5-4695-AC49-9675494A70E1
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-116 21F56-5195- 4DE6-92E0-5 AFEC5B4DC1F
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation. Some
indicators andwarnings foroperation aredisplayed
on the vehicle information displayand/orinthe meter.
(See ªVehicle information displayº(P.2-20) and
ªW arning/indicator lightsandaudible remindersº
(P .2-12) .)
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle. .
Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
possible. (SeeªJump startingº (P.6-8) .)
Operating range
GUID-6DCA9 273-95BE-404D-9DED-C 3ABB1547B7 E
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent K
ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-48 46178B-012D -41FF-8D9A-4 B56BC7ED0EE
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. ªShift toParkº warning appears onthe vehicle
information displayandachime sounds.
2. Move theshift lever tothe ªPº (Park) position.
3. Push theignition switch.Theignition switchis
switched tothe ªOFFº position.
4. Open thedoor. Theignition switchturnstothe
ªL OCKº position.
For warnings andindicators onthe vehicle information
display ,see ªVehicle information displayº(P.2-20) .
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake pedaldepressed.
Starting anddriving
5-9
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OFF position
GUID-DA2B 9201-206A-4 06B-891F-59A88D312FBD
The engine isturned offinthis position.
Auto ACC position
GUID-0E2 947FE-3378-4474-91 C2-392C409 08C39
With thevehicle inthe ªPº (Park) position, the
Intelligent Key with youand theignition placedfrom
ªONº toªOFFº ,the radio canstillbeused foraperiod
of time, oruntil thedriver's doorisopened. Aftera
period oftime, functions suchasradio, navigation (if
equipped) ,and Bluetooth


> (GLW    0RGHO 7$@
5-12
Starting anddriving
especially incold weather.
CAUTION:
Do not leave thevehicle unattended whilethe
engine iswarming up.
GUID-85BD 5A32-4CA0-4 B20-A3F7-7F2F8C6EA 88C
1. Apply theparking brake.
2. Continuously Variable Transmission (CVT)
model:
Move theshift lever tothe ªPº (Park) orthe ªNº
(Neutral) position.
The starter isdesigned tooperate onlywhen
the shift lever isin the proper position.
Manual Transmission (MT)model:
Move theshift lever tothe ªNº (Neutral) position.
The starter isdesigned tonot operate unless
the clutch pedalisfully depressed.
The Intelligent Keymust becarried when
operating theignition switch.
3. Place theignition switchinthe ªONº position.
Depress thebrake pedal(CVTmodel) orthe
clutch pedal(MTmodel) andpush theignition
switch tostart theengine.
For diesel engine models: Wait until theglow
indicator light
goes out.
T o start theengine immediately ,push andrelease
the ignition switchwhiledepressing thebrake
pedal orclutch pedalwiththeignition switchin
any position.
4. Immediately releasetheignition switchwhenthe
engine starts.Ifthe engine starts,butfails torun,
repeat theabove procedures.
If the engine isvery hard tostart inextremely cold
or hot weather, depresstheaccelerator pedaland
hold it.Push theignition switchforupto15
seconds whileholding. Release theaccelerator
pedal whentheengine starts.
CAUTION:
. Assoon asthe engine hasstarted, release
the ignition switchimmediately.
. Donot operate thestarter formore than15
seconds atatime. Ifthe engine doesnot
start, place theignition switchinthe ªOFFº
position andwait 10seconds beforecrank-
ing the engine again.Otherwise, thestarter
could bedamaged.
. Ifitbecomes necessary tostart theengine
with abooster batteryandjumper cables,
the instructions andcautions contained in
the ª6.Incase ofemergencyº sectionshould
be carefully followed.
5. Allow theengine toidle foratleast 30seconds
after starting theengine towarm-up. Driveat
moderate speedsforashort distance first,
especially incold weather.
CAUTION:
Do not leave thevehicle unattended whilethe
engine iswarming up.
6. To stop theengine, movetheshift lever tothe ªPº
(Park) position (CVTmodel) ormove theshift lever
to the ªNº (Neutral) position(MTmodel) ,apply the
parking brakeandplace theignition switchinthe
ªOFFº position.
ST ARTING ENGINE (modelwith
Intelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-16
Starting anddriving
T ype A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVS0392X
Example
1. Place theignition switchinthe ªOFFº orªLOCKº
position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover(shown inthe
illustration above)usingasuitable tool.
4. Insert themechanical keyand push down theshift
lock release.
5. Press theshift lever button andmove theshift
lever tothe ªNº (Neutral) positionwhileholding
down theshift lockrelease. Replace theremoved
shift lockrelease coveraftertheoperation. T
ype B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVS0466X
1. Place theignition switchinthe ªOFFº orªLOCKº
position.
2. Apply theparking brake.
3. Depress theshift lockrelease button.
4. Press theshift lever button andmove theshift
lever tothe ªNº (Neutral) positionwhileholding
down theshift lockrelease.
Place theignition switchinthe ªONº position to
release thesteering wheellock.
The vehicle maybemoved, bypushing, tothe desired
location.
If the shift lever cannot bemoved outofthe ªPº (Park)
position, haveaNISSAN dealerchecktheCVT system
as soon aspossible.
High fluidtemperature protectionmode
T32A1308 27-808BD 7D2-9BE0-4 70E-A660-24 B385D4FB8A
This transmission hasahigh fluidtemperature protec-
tion mode. Ifthe fluid temperature becomestoohigh
(for example, whenclimbing steepgrades inhigh
temperature withheavy loads),engine powerand,
under someconditions, vehiclespeedwillbede-
creased automatically toreduce thechance of
transmission damage.Vehicle speed canbecontrolled with
theaccelerator pedal,butengine andvehicle
speed maybelimited.
Fail-safe
T32A1308 27-5877C8 5B-EA11-4DD 6-9D52-6992317A74D 5
When thefail-safe operation occurs,theCVT willnot
be shifted tothe selected drivingposition.
If the vehicle isdriven underextreme conditions,
such asexcessive wheelspinning andsubse-
quent hardbraking, thefail-safe systemmaybe
activated. Thiswilloccur evenifall electrical
circuits arefunctioning properly.Inthis case,
turn theignition switchoffand wait for10
seconds. Thenplace theignition switchbackin
the ªONº position. Thevehicle shouldreturnto
its normal operating condition. Ifitdoes not
return toits normal operating condition, havea
NISSAN dealercheckthetransmission and
repair itifnecessary.
WARNING:
When thefail-safe operation occurs,vehicle
speed maybegradually reduced.Thereduced
speed maybelower thanother traffic,which
could increase thechance ofacollision. Be
especially carefulwhendriving. Ifnecessary, pull
to the side ofthe road atasafe place andallow
the transmission toreturn tonormal operation,
or have itrepaired ifnecessary.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SSD0488
Left-Hand Drive(LHD) model
SSD0489
Right-Hand Drive(RHD) model
1. Firmly applytheparking brake.
2. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªRº (Reverse) position.Whenparking
on anuphill grade, movetheshift lever tothe ª1º
(1st) position.
3. To help prevent thevehicle frommoving intotraffic
when parked onanincline, itis agood practice to
turn thewheels asillustrated.
HEADED DOWNHILL WITHCURB
*
1
T urn thewheels towards thecurb andmove the vehicle
forward untilthecurb sidewheel gently
touches thecurb. Thenapply theparking brake.
HEADED UPHILLWITHCURB
*
2
T urn thewheels awayfromthecurb andallow the
vehicle tomove backuntilthecurb sidewheel
gently touches thecurb. Thenapply theparking
brake.
HEADED UPHILLORDOWNHILL, WITHOUT
CURB
*
3
T urn thewheels towardtheside ofthe road sothe
vehicle willmove awayfromthecenter ofthe road
if the vehicle moves. Thenapply theparking brake. 4.
Model withIntelligent Key:
Place theignition switchinthe ªOFFº position.
Model without Intelligent Key:
Place theignition switchinthe ªLOCKº position
and remove thekey.
NO TE:
For Model withStop/Start SystemorIdling Stop
System:
Use thissystem whenthevehicle isstopped for
a period oftime, forexample waitingatstop-
lights.
Stop theengine withtheignition switchwhen
parking, etc.for anextended periodoftime.
Starting anddriving
5-49
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
For thevehicle equipped withrearsensor (Type
A) :
The system informwithvisual andaudible signalofrear
obstacles whentheshift lever isin the ªRº (Reverse)
position.
The system isdeactivated atspeeds above10km/h (6
MPH) .It is reactivated atlower speeds.
The intermittent tonewillstop after 3seconds whenan
obstacle isdetected byonly thecorner sensor andthe
distance doesnotchange. Thetone willstop when the
obstacle getaway fromthevehicle.
For thevehicle equipped withfront andrear
sensor (Type B):
The system informwithvisual andaudible signalof
front obstacles whentheshift lever isin the ªDº (Drive)
position andboth front andrear obstacles whenthe
shift lever isin the ªRº (Reverse) position.
The system isdeactivated atspeeds above10km/h (6
MPH) .It is reactivated atlower speeds.
The intermittent tonewillstop after 3seconds whenan
obstacle isdetected byonly thecorner sensor andthe
distance doesnotchange. Thetone willstop when the
obstacle getaway fromthe
vehicle.
JVS0408X
When thecorner ofthe vehicle movesclosertoan
object, thecorner sensor indicators
*
1
appears (if
equipped) .
When thecenter ofthe vehicle movesclosetoan
object, thecenter sonarindicator
*
2
appears.
When theobject isdetected, theindicator (green)
appears andblinks andthetone sounds intermittently .
When thevehicle movesclosertothe object, thecolor
of the indicator turnsyellow andtherate ofthe blinking
increase. Whenthevehicle isvery close tothe object,
the indicator stopsblinking andturns red,andthetone
sounds continuously .
P ARKING SENSOR (sonar)SYSTEM OFF
SWIT CH(ifequipped)
GUID-669 F16C6-EAC D-47A7-9781-2C30B 6CE59DB
T ype A:
The ENTER buttononthe steering-wheel-moun ted
controls allowsthedriver toturn theparking sensor
(sonar) systemoff.
The parking sensor(sonar) systemwillturn on
automatically underthefollowing conditions.
. When theignition switchisplaced fromtheªOFFº
position tothe ªONº position.
. When theshift lever isin the ªRº (Reverse)
position.
. When thevehicle speeddecrease to10 km/h (6
MPH) .
The automatic turningonfunction canbeturned on
and offbyªSensorº keyinthe setting menu.See
ªDriver Assistanceº (P.2-21) . T
ype B:
JVS0438X
The sonar (parking sensor)systemOFFswitch onthe
instrument panelallows thedriver toturn thesonar
(parking sensor)systemonand off.To turn thesonar
(parking sensor)systemonand off,the ignition switch
must beinthe ªONº position.
The indicator light
*
1
on the switch willilluminate
when thesystem isturned on.
If the indicator lightflashes whenthesonar (parking
sensor) systemisnot turned off,itmay indicate a
malfunction inthe sonar (parking sensor)system.
The sonar (parking sensor)systemwillbeturned on
automatically underthefollowing conditions:
. When theignition switchisswitched fromthe
ªOFFº position tothe ªONº position.
. When theshift lever isshifted intotheªRº
(Reverse) position.
. When thevehicle speedincreases to10 km/h (6
MPH) anddecreases.
The automatic activationfunctioncanbeturned onand
off bypushing theswitch formore than4seconds.
Starting anddriving
5-51
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1. Ifthe booster batteryisin another vehicle
*
B
,
position thetwo vehicles
*
A
and
*
B
to bring the
batteries intoclose proximity toeach other.
CAUTION:
If the battery ofvehicle
*
A
equipped withthe
Intelligent Keysystem isdischarged, theignition
switch cannot bemoved fromtheªLOCKº
position and,ifthe steering lockisengaged,
the steering wheelcannot bemoved. Connect
the jumper cablestothe booster vehicle
*
B
before turning orpushing theignition switchand
disengaging thesteering lock.
2. Apply theparking brake.
3. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Place theignition switchinthe ªLOCKº position.
6. Remove thevent caps, ifequipped, onthe battery .
7. Cover thebattery withafirmly wrung outmoist
cloth toreduce thehazard ofan explosion.
8. Connect thejumper cablesinthe sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
) .
CAUTION:
. Always connect positive +topositive +and
negative 7tobody ground, NOTto the
battery's negative7.
. Besure thatthejumper cablesdonot touch
moving partsinthe engine compartment. .
Besure thatthejumper cable's clamps do
not contact anyother metal.
9. Start theengine ofthe booster vehicle
*
B
and let
it run forafew minutes.
10. Depress theaccelerator pedalofthe booster
vehicle
*
B
at about 2,000 rpm.
11. Start theengine ofthe jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keepthestarter motorengaged formore
than 10seconds. Ifthe engine doesnotstart
right away, placetheignition switchªOFFºand
wait atleast 10seconds beforetryingagain.
12. After theengine isstarted, carefully disconnect
the jumper cablesinthe opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
) .
13. Remove anddispose ofthe cloth asitmay be
contaminated withcorrosive acid.
14. Replace thevent caps, ifremoved.
NO TE:
. For model withStop/Start SystemorIdling
Stop System, usethespecial batterythatis
enhanced inregard tothe charge-discharge
capacity andlifeperformance. Avoidusinga
non-special batteryforthe Stop/Start Sys-
tem orIdling StopSystem, asthis may cause
early deterioration ofthe battery oramal-
function ofthe Stop/Start SystemorIdling
Stop System. Forthebattery, itis recom-
mended touse Genuine NISSANparts.For
more information, contactaNISSAN dealer. .
For model withStop/Start SystemorIdling
Stop System, itmay take some timeuntil
Stop/Start SystemorIdling StopSystem
activates whenthebattery isreplaced orthe
battery terminal isdisconnected forex-
tended periods andthen reconnected.
In case ofemergency
6-9
&RQGLWLRQ
([FHSWIRU&KLQD