power mode NISSAN X-TRAIL 2016 User Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2016, Model line: X-TRAIL, Model: NISSAN X-TRAIL 2016Pages: 400, PDF Size: 8.75 MB
Page 140 of 400
> ( G L W 0 R G H O 7 $ @
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 142 of 400
> ( G L W 0 R G H O 7 $ @
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 143 of 400
> ( G L W 0 R G H O 7 $ @
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 147 of 400
> ( G L W 0 R G H O 7 $ @
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 148 of 400
> ( G L W 0 R G H O 7 $ @
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 157 of 400
> ( G L W 0 R G H O 7 $ @
T32A1308 27-429755 59-4B72-431E -97D9-4E2AB37B374F
WARNING:
. Donot adjust thedisplay controls, heater
and airconditioner controlsoraudio con-
trols while driving sothat fullattention may
be given tovehicle operation.
. Ifyou noticed anyforeign objects entering
the system hardware, spilledliquidonthe
system, ornoticed smokeorfumes coming
out from thesystem, orany other unusual
operation isobserved, stopusing thesystem
immediately andcontact thenearest
NISSAN dealer.Ignoring suchconditions
may lead toan accident, fireorelectric
shock.
. Donot disassemble ormodify thissystem. If
you do,itmay lead toan accident, fire,or
electric shock.
CAUTION:
Do not use thesystem whentheengine isnot
running forextended periodsoftime toprevent
battery discharge.
GUID-6B02E F9F-9949-49 6A-B30C-81C99CB1D 952
JVH0829X
1. Display screen(P.4-4)
2. Fornavigation systemcontrolbuttons referto
the separate Navigation SystemOwner's Man-
ual.
3. INFO button (P.4-5)
4. Power/VOLUME dial(P.4-70)
5. Brightness control/display on´offbutton (P.4-4)
6. ENTER/Scroll dial(P.4-4)
7. BACK button (P.4-4)
8. SETUP button(P.4-5)
Display screen,heaterandairconditione r,and audio system
4-3
SAFETY
PRECAUTI ONS CENTER
MULTI-FUNCTI ON
CONTROL PANEL (models with
navigation system)
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 198 of 400
> ( G L W 0 R G H O 7 $ @
4-44
Display screen,heaterandaircondition er,and audio system
CD PLAYER/RADIO (Type A)
GUID-B21C AB82-872E-4BBE-A581 -6C0DF810 1A1E
JVH0830X
Models withTA button
1. DISP (Display) button
2. RADIO button
3. Day/Night button
4. TA button
5. Seek/track (rewind)button
6. Seek/track (fastforward) button
7. SETUP button
8. Back button 9.
CDeject button
10. MEDIA button
11. Phone button
12. Power/VOL (Volume) dial
13. RPT(repeat) button
14. MIXbutton
15. Station memory buttons
16. A-Zbutton 17.
MENU/ENTER dial
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 199 of 400
> ( G L W 0 R G H O 7 $ @
JVH0831X
Models without TA button
1. DISP (Display) button
2. RADIO button
3. Day/Night button
4. MIXbutton
5. Seek/track (rewind)button
6. Seek/track (fastforward) button
7. SETUP button
8. Back button
9. CDeject button 10.
MEDIA button
11. Phone button
12. Power/VOL (Volume) dial
13. RPT(repeat) button
14. Station memory buttons
15. A-Zbutton
16. MENU/ENTER dial
Anti-theft system(ifequipped)
GUID-62 FF74DB-01 4B-40D1-A1 35-3AC93D8F D1E2
Use ofa4-digit radioPIN(Personal Identification
Number) code,known onlytothe vehicle owner,
effectively reducesthepossibility ofthe audio unit
being stolen. Without thePIN code theaudio unit
cannot beactivated.
If force isused totry and remove theaudio unit,the
Anti-theft systemactivates andtheaudio unitislocked.
The only waytounlock theaudio unitisto enter the
radio code number shownonanidentification card
supplied withthevehicle documentation.
NO TE:
. The 4digit radio codeisshown onacard
that youreceived withyour vehicle docu-
mentation.
. Contact aNISSAN dealerifyou dolose the4
digit radio codeofthe audio unit.
Unlocking theunit :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the battery supplytothe vehicle isinterrupted, the
audio unitwilllock.
When thepower isrestored andtheunit switched on,
the display willshow ªRadio Codeºanditwill be
unlocked whenthecodes havebeen entered correctly .
Unlocking procedure:
Read thissection verycarefully .It is important thatthe
instructions arefollowed precisely.
T o unlock theaudio unit,proceed asfollows:
Display screen,heaterandairconditioner ,and audio system
4-45
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 200 of 400
> ( G L W 0 R G H O 7 $ @
4-46
Display screen,heaterandaircondition er,and audio system
JVH0832X
1. Place theignition switchinthe ªACCº orªONº
position.
2. ªRadio Codeºisdisplayed alongwithfour
numerical zerodigits.
3. Push preset
*
1
the number oftimes correspond-
ing with thefirst digit ofthe radio code.
For example, ifthe radio code is5169: forthe first
digit, ª5º,push thepreset
*
1
five times.
4. The second, third,andfourth digitsofthe radio
code mustbeentered inthe same way,only now
using preset
*
2
,
*
3
, and
*
4
.
For example, push
*
2
once,
*
3
six times, and
*
4
nine times.
5. Push theMENU/ENTER dial
*
5
to confirm the
code. Ifyou entered thecode correctly theunit will
switch on.
6. Ifthe code isentered incorrectly anotification
message ªIncorrect Pinº,ªPlease re-enter Pinºand
the number ofattempts left[Remaining Tries: xx]
will beshown.
After reading themessage, pushtheMENU/ENTER
dial
*
5
to return tothe entry screen andenter the
correct radiocode. .
Ifthe wrong codeisentered afterthethird
attempt, theaudio unitwilllock for60 minutes.
The display willshow acount downtimerfrom60
to 0(minutes) .After 60minutes enterthecorrect
radio code.
. Ifthe wrong codeisentered aftereight setsof
three entries, theaudio unitwilllock permanently .
Contact aNISSAN dealerforfurther details.
Audio mainoperation
GUID-F 79A1FBC-53 3D-4A46-B2A4-FFD86 2545661
The audio system operates whentheignition switchis
placed inthe ªONº orªACCº
position.
Power/VOL dial:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Power ON/OFF:
T o turn onthe audio system, pushthePower/VOL dial.
The system willturn oninthe mode, whichwasused
immediately beforethesystem wasturned off.
T o turn offthe audio system, pushthePower/VOL dial.
V olume control:
T o control thevolume, turnthePower/VOL dial.
T urn thePower/VOL dialclockwise tomake thesound
louder.
T urn thePower/VOL dialcounterclockwise tomake the
sound quieter.
SETUP button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o configure Audio,Clock,Radio, orLanguage
settings, performthefollowing procedure:
1. Push theSETUP button.
2. Turn theMENU/ENTER dial,thedisplay will
appear inthe following order:
Audio ?Clock ?Radio ?Language 3.
Push theMENU/ENTER dial.
After thedesired levelshavebeen set,push theBack
button repeatedly orpush theSETUP button.
Audio adjustments:
T urn theMENU/ENTER dialuntil theAudio is
displayed, andpush theMENU/ENTER dial.
Each timetheMENU/ENTER dialispushed, themode
will change asfollows:
Sound ?AUX In?Speed Vol. ? Bass Boost ?
Audio Default
T urn theMENU/ENTER dialclockwise orcounter-
clockwise toadjust thefollowing itemsandpush
MENU/ENTER dialtoconfirm.
. Sound menu
Bass:
Use thiscontrol toenhance orattenuate bass
response sound.
T reble:
Use thiscontrol toenhance orattenuate the
treble.
Bal. (Balance) :
Use thiscontrol toadjust thebalance ofthe
volume between theleftand right speakers.
Fade:
Use thiscontrol toadjust thebalance ofthe
volume between thefront andtherear speakers.
. AUX Inmenu
Use thiscontrol toadjust thevolume outputfrom
the auxiliary source.
. Speed Vol. (Volume) menu
This mode controls thevolume outputfromthe
speakers automatically inrelation tovehicle speed.
Adjusting thesetting to0(zero) turnsoffthe
speed volume feature.
& R Q G L W L R Q
( [ F H S W I R U & K L Q D
Page 201 of 400
> ( G L W 0 R G H O 7 $ @
. Bass Boost menu
T urn onoroff the Bass Boost feature which
emphasizes thelower audio frequencies.
. Audio Default menu
The audio unithasasaved preset settings asa
factory default. SelectªYesº tochange allsettings
back tothe factory presetsettings. SelectªNoºto
exit themenu keeping thecurrent settings.
Clock setting:
T urn theMENU/ENTER dialuntil theClock is
displayed, andpush theMENU/ENTER dial.
T urn theMENU/ENTER dial,themode willchange as
follows:
Set Time ?ON/OFF ?Format
. Set Time
Select ªSetTimeº thenadjust theclock asfollows:
The hour display willstart flashing. Turn the
MENU/ENTER dialtoadjust thehour andpush
the MENU/ENTER dial.Theminute display will
start flashing. Turn theMENU/ENTER dialto
adjust theminute andpush theMENU/ENTER
dial tofinish theclock adjustment.
. ON/OFF
The clock display canbeturned onand off.When
ªONº isselected, theclock willbedisplayed. (The
clock willkeep being displayed evenafterthe
power ofthe audio unitisturned off).When ªOFFº
is selected, theclock willnot bedisplayed.
. Format
Switch theclock display between 24-hourmode
and 12-hour clockmode.
Radio setting:
T urn theMENU/ENTER dialuntil theRadio is
displayed, andpush theMENU/ENTER dial. The
FMstation whichcanbereceived willbeupdated.
Language setting:
T urn theMENU/ENTER dialuntil theLanguage is
displayed, andpush theMENU/ENTER dial.
Select theappropriate languageandpush theMENU/
ENTER dial.Upon completion, thescreen willauto-
matically adaptthelanguage setting.
Day/Night button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theDay/Night buttontoswitch thedisplay
brightness betweenthedaytime andnighttime modes.
The switches onthe audio unitwillalso illuminate inthe
nighttime mode.
Phone button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
For operation onhow touse phone button, see
ªBluetooth