ignition NISSAN X-TRAIL 2019 Owners Manual


> (GLW    0RGHO 7$@
6-2
In case ofemergency
T32A1308 27-1CA14978 -018C-4DAF-9882-1F9 A0A0A23F 2
SIC2475
The hazard indicator flasherswitchoperates regard-
less ofthe ignition switchposition exceptwhenthe
battery isdischarged.
The hazard indicator flasherisused towarn other
drivers whenyouhave tostop orpark under
emergency conditions.
When thehazard indicator flasherswitchispushed, all
turn signal lightswillflash. To turn offthe hazard
indicator flasher,pushthehazard indicator flasher
switch again.
When animpact thatcould activate thesupplemental
air bags isdetected, thehazard warning flasherlights
blink automatically .If the hazard warning flasherswitch
is pushed, thehazard warning flasherswillturn off.
WARNING:
Do not turn thehazard warning flasherswitchto
off until youcanmake surethatitis safe todo
so. Also, thehazard flasher warning maynot
blink automatically dependingonthe force of
impact.
T32A130827-5 BBC013D-2895-406E -B78D-DB3360F5A392
If you have aflat tire, follow theinstructions asfollows.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (ifequipped)
GUID-5E03 39A0-2DD1- 4BAB-A41C-59B791FC2 152
WARNING:
. Ifthe low tirepressure warninglightillumi-
nates whiledriving, avoidsudden steering
maneuvers orabrupt braking, reducevehicle
speed, pulloffthe road toasafe location
and stop thevehicle assoon aspossible.
Driving withunder-inflated tiresmayperma-
nently damage thetires andincrease the
likelihood oftire failure. Serious vehicle
damage couldoccurandmay lead toan
accident andcould result inserious personal
injury. Check thetire pressure forallfour
tires. Adjust thetire pressure tothe recom-
mended COLDtirepressure shownonthe
tire placard toturn thelow tirepressure
warning lightoff.Ifthe light stillilluminates
while driving afteradjusting thetire pres-
sure, atire may beflat. Ifyou have aflat tire,
replace itwith aspare tire(ifequipped) as
soon aspossible.
. When aspare tireismounted orawheel is
replaced, theTPMS willnotfunction andthe
low tirepressure warninglightwillflash for
approximately 1minute. Thelight willre-
main onafter the1minute. Contact a
NISSAN dealerassoon aspossible fortire
replacement and/orsystem resetting.
. Replacing tireswiththose notoriginally
specified byNISSAN couldaffect theproper
operation ofthe TPMS.
The Tire Pressure Monitoring System(TPMS) monitors
tire pressure ofall tires except thespare. Whenthelow tire
pressure warninglightislit, one ormore ofyour
tires issignificantly under-inflated. Ifthe vehicle is
being driven withlowtirepressure, theTPMS will
activate andwarn youofitby the low tirepressure
warning light(inthe meter panel).This system will
activate onlywhen thevehicle isdriven atspeeds
above 25km/h (16MPH) .
For more details, seeªLow tirepressure warninglightº
(P .2-14) andªTire Pressure Monitoring System
(TPMS)º (P.5-4) .
ST OPPING VEHICLE
T32A1308 27-40DAB50 9-FB3E-4FB9-8C5E-CC9C163BB1F4
WARNING:
. Besure toapply theparking brakefirmly.
. Besure tomove theshift lever tothe ªPº
(Park) position (Continuously Variable
T ransmission model)orthe shift lever to
the ªRº(Reverse) position(ManualTransmis-
sion model) .
. Never change tireswhen thevehicle ison a
slope, iceorslippery area.Thisishazardous.
. Never change tireswhen theoncoming
traffic isclose toyour vehicle. Callfor
professional roadassistance.
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Park onalevel surface.
4. Apply theparking brake.
5. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªRº (Reverse) position.
HAZARD INDICATOR FLASHER
SWIT CH FLA
TTIRE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1. Ifthe booster batteryisin another vehicle
*
B
,
position thetwo vehicles
*
A
and
*
B
to bring the
batteries intoclose proximity toeach other.
CAUTION:
If the battery ofvehicle
*
A
equipped withthe
Intelligent Keysystem isdischarged, theignition
switch cannot bemoved fromtheªLOCKº
position and,ifthe steering lockisengaged,
the steering wheelcannot bemoved. Connect
the jumper cablestothe booster vehicle
*
B
before turning orpushing theignition switchand
disengaging thesteering lock.
2. Apply theparking brake.
3. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Place theignition switchinthe ªLOCKº position.
6. Remove thevent caps, ifequipped, onthe battery .
7. Cover thebattery withafirmly wrung outmoist
cloth toreduce thehazard ofan explosion.
8. Connect thejumper cablesinthe sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
) .
CAUTION:
. Always connect positive +topositive +and
negative 7tobody ground, NOTto the
battery's negative7.
. Besure thatthejumper cablesdonot touch
moving partsinthe engine compartment. .
Besure thatthejumper cable's clamps do
not contact anyother metal.
9. Start theengine ofthe booster vehicle
*
B
and let
it run forafew minutes.
10. Depress theaccelerator pedalofthe booster
vehicle
*
B
at about 2,000 rpm.
11. Start theengine ofthe jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keepthestarter motorengaged formore
than 10seconds. Ifthe engine doesnotstart
right away, placetheignition switchªOFFºand
wait atleast 10seconds beforetryingagain.
12. After theengine isstarted, carefully disconnect
the jumper cablesinthe opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
) .
13. Remove anddispose ofthe cloth asitmay be
contaminated withcorrosive acid.
14. Replace thevent caps, ifremoved.
NO TE:
. For model withStop/Start SystemorIdling
Stop System, usethespecial batterythatis
enhanced inregard tothe charge-discharge
capacity andlifeperformance. Avoidusinga
non-special batteryforthe Stop/Start Sys-
tem orIdling StopSystem, asthis may cause
early deterioration ofthe battery oramal-
function ofthe Stop/Start SystemorIdling
Stop System. Forthebattery, itis recom-
mended touse Genuine NISSANparts.For
more information, contactaNISSAN dealer. .
For model withStop/Start SystemorIdling
Stop System, itmay take some timeuntil
Stop/Start SystemorIdling StopSystem
activates whenthebattery isreplaced orthe
battery terminal isdisconnected forex-
tended periods andthen reconnected.
In case ofemergency
6-9
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-5ADBFD CE-C556-495F-8294-4EF D4BFC5099
When towing yourvehicle, localregulations fortowing
must befollowed. Incorrecttowingequipment could
damage yourvehicle. To assure propertowing andto
prevent accidental damagetoyour vehicle, NISSAN
recommends thatyouhave professional roadassis-
tance personnel towyour vehicle. Itis advisable to
have theprofessional roadassistant carefullyreadthe
following precautions.
T OWING PRECAUTIONS
T32A1308 27-7E42C15 2-10BF-4374-A885-0A3 D89794DC3
. Besure thatthetransmission, steeringsystem,
and drivetrain areinworking condition before
towing. Ifany units aredamaged, thevehicle must
be towed usingadolly orflatbed towtruck. (Two-
Wheel Drive(2WD) model)
. NISSAN recommends thatyour vehicle betowed
with thedriving (front)wheels offthe ground.
(T wo-Wheel Drive(2WD) model)
. Always attachsafetychains beforetowing.
. Never towFour-Wheel Drive(4WD) modelwith
any ofthe wheels onthe ground asthis may cause
serious andexpensive damagetothe drivetrain.
T OWING RECOMMENDED BY NISSAN
T32A1308 27-4F07BA 95-CC62-4AA4-95CD-C7 5F7896FA0C
T owing Two-Wheel Drive(2WD) model
T32A1308 27-20FA02AA-F81 7-48A2-B25 D-1D1DCBE 00315
JVE0167X
2WD model
JVE0168X
2WD model
Front wheels onthe ground:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
NISSAN recommends thattowing dolliesbeused
under thefront wheels whentowing yourvehicle orthe
vehicle beplaced onaflatbed towtruck asillustrated.
CAUTION:
Never towContinuously Variable Transmission
(CVT) model withthefront wheels onthe
ground. Doingsowill cause serious andexpen- sive
damage tothe drivetrain.
Manual Transmission (MT)model:
If you have totow aMT vehicle withfront wheel onthe
ground, perform thefollowing procedures.
1. Place theignition switchinthe ªOFFº position.
2. Secure thesteering wheelinastraight-ahead
position withrope orasimilar device.
3. Move theshift lever tothe ªNº (Neutral) position.
4. Release theparking brake.
5. Attach thesafety chains whenever towing.
Rear wheels onthe ground:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Place theignition switchinthe ªOFFº position.
2. Move theshift lever tothe ªNº (Neutral) position.
3. Release theparking brake.
4. Attach safetychains whenever towing.
All four wheels onthe ground:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
NISSAN recommends thatthevehicle beplaced ona
flatbed towtruck asillustrated.
CAUTION:
Never towCVT model withallfour wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe drivetrain.
Manual Transmission (MT)model:
If you have totow aMT vehicle withallfour wheels on
the ground, perform thefollowing procedures.
CAUTION:
. Never towamanual transmission model
backward withallfour wheels onthe
ground.
In case ofemergen cy
6-11
T
OWING YOUR VEHICLE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
6-12
In case ofemergency
1. Place theignition switchinthe ªOFFº position.
2. Move theshift lever tothe ªNº (Neutral) position.
3. Release theparking brake.
T owing Four-Wheel Drive(4WD) model
T32A130827- 693E447E-03E7-4D37-A2 93-4348DD 8C9B5B
JVE0169X
4WD model
JVE0170X
4WD model
NISSAN recommends thattowing dolliesbeused
under thefront orrear wheels whentowing your
vehicle orthe vehicle beplaced onaflatbed towtruck
as illustrated.
CAUTION:
Never tow4WD withanyofthe wheels onthe
ground. Doingsowill cause serious andexpen-
sive damage tothe drivetrain.
Freeing trapped vehicle
GUID-12A4 552C-8AF3 -492C-8958-3 AD857FAAFD4
WARNING:
. Never allowanyone tostand nearthetowing
line during thepulling operation.
. Never spinthetires athigh speed. Thiscould
cause themtoexplode andresult inserious
injury. Partsofthe vehicle couldalsoover-
heat andbedamaged.
. Donot pull thevehicle usingtherear hook
(except forEurope andIndonesia) .The rear
hook isnot designed topull thevehicle out
in the event thatthevehicle becomes
trapped.
In the event thatyour vehicle's tiresbecome trappedin
sand, snow,or mud, andthevehicle isunable tofree
itself without beingpulled, usetherecovery hooks.
. Use therecovery hooksonly.Do not attach the
pulling devicetoany other partofthe vehicle body.
Otherwise, thevehicle bodymaybedamaged.
. Use therecovery hookstofree avehicle only.
. The recovery hooksareunder tremendous stress
when usedtofree atrapped vehicle.Alwayspull
the pulling devicestraight outfrom thevehicle.
Never pullonthe recovery hooksatan angle. Front
:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVE0158X
Front
SCE0833
Front
*
1
Remove thehook cover fromthebumper witha
suitable tool.
*
2
Securely installtherecovery hookasillustrated.
(The hook isstored inthe storage area.)
Make surethattherecovery hookisproperly secured
in its storage areaafter use.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-4
Mainten anceanddo-it-yo urself
Brake andclutch fluidlevel(s)*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
For Manual Transmission (MT)model; makesurethat
the brake andclutch fluidlevels arebetween the
ªMAXº andªMINº linesonthe reservoirs.
Except forManual Transmission (MT)model; make
sure thatthebrake fluidlevel isbetween theªMAXº
and ªMINº linesonthe reservoir.
Coolant level*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thecoolant levelwhen thecoolant iscold. Make
sure thatthecoolant levelisbetween theªMAXº and
ªMINº linesonthe reservoir.
Engine drivebelts*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatdrive belt(s) is/arenotfrayed, worn,
cracked oroily .
Engine oillevel*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thelevel afterparking thevehicle (onalevel
ground) andturning offthe engine.
Fluid leaks:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check underthevehicle forfuel, oil,water orother fluid
leaks afterthevehicle hasbeen parked forawhile.
W ater dripping fromtheairconditioner afteruseis
normal. Ifyou should noticeanyleaks oriffuel fumes
are evident, checkforcause andhave itcorrected
immediately .
Window washerfluid*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthere isadequate fluidinthe reservoir.
MAINTENANCE PRECAUTIONS
T32A130827-1 06C2D29-B070-4D5F-A 2F9-9FBEA1 80F240
When performing anyinspection ormaintenance work
on your vehicle, alwaystakecare toprevent serious
accidental injurytoyourself ordamage tothe vehicle.
The following aregeneral precautions whichshould be
closely observed.
WARNING:
. Park thevehicle onalevel surface, applythe
parking brakesecurely andblock thewheels
to prevent thevehicle frommoving. Move
the shift lever tothe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever tothe ªNº(Neutral) position
(Manual Transmission model).
. Besure theignition switchisin the ªOFFº or
ªLOCKº position whenperforming anyparts
replacement orrepairs.
. Do not work under thehood while the
engine ishot. Always turnoffthe engine
and wait until itcools down.
. Ifyou must workwiththeengine running,
keep yourhands, clothing, hairandtools
away frommoving fans,belts andanyother
moving parts.
. Itis advisable tosecure orremove anyloose
clothing andanyjewelry, suchasrings,
watches, etc.before working onyour vehi-
cle.
. Ifyou must runtheengine inan enclosed
space suchasagarage, besure there is
proper ventilation forexhaust gasesto
escape.
. Never getunder thevehicle whileitis
supported byajack. .
Keep smoking materials, flameandsparks
away fromfuelandthebattery.
. Never connect ordisconnect eitherthe
battery orany transistorized component
connector whiletheignition switchisin the
ªONº position.
. Ongasoline enginemodels withtheMulti-
port Fuel Injection (MFI)system, thefuel
filter andfuel lines should beserviced bya
NISSAN dealerbecause thefuel lines are
under highpressure evenwhen theengine is
turned off.
. Your vehicle isequipped withanautomatic
engine cooling fan.Itmay come onatany
time without warning, evenifthe ignition
switch isin the ªOFFº position andthe
engine isnot running. To avoid injury, always
disconnect thenegative batterycablebefore
working nearthefan.
. Always weareyeprotection wheneveryou
work onyour vehicle.
. Never leavetheengine ortransmission
related component harnessconnector dis-
connected whiletheignition switchisin the
ªONº position.
. Avoid directcontact withused engine oiland
coolant. Improperly disposedengineoil,
engine coolant, and/orothervehicle fluids
can hurt theenvironment. Alwaysconform to
local regulations fordisposal ofvehicle
fluids.
This ª8.Maintenance anddo-it-yourselfº section
provides instructions regardingonlythose itemswhich
are relatively easyforanowner toperform.
Y ou should beaware thatincomplete orimproper
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-14
Maintenance anddo-it-yours elf
T32A130827- 88FE8B68-7E C8-43A9-87D9-027F2C7 FD6F9
JVM0398X
QR25DE engine
1. Crankshaft pulley
2. Drive beltauto-tensioner
3. Water pump
4. Alternator
5. Airconditioner
compressor
SDI1881
MR20DD engine
1. Alternator
2. Drive beltauto-tensioner
3. Crankshaft pulley
4. Airconditioner compressor
5. Water
pump
JVM0439X
R9M engine
1. Water pump
2. Idlerpulley
3. Alternator
4. Crankshaft pulley
5. Drive beltauto-tensioner
6. Airconditioner compressor
Be sure theignition switchisin the ªOFFº position.
Visually inspectthebelt forsigns ofunusual wear,cuts,
fraying orlooseness. Checkregularly forcondition. If
the belt isin poor condition orloose, haveitreplaced
or adjusted byaNISSAN dealer.
GUID-15F3 0443-A743-4 FB1-8DD2-0348CDB 56899
WARNING:
Be sure theengine andignition switchareoff
and that theparking brakeisapplied.
Replace thespark plugs according tothe maintenance
log shown inaseparate maintenance booklet.
If replacement isrequired, contactaNISSAN dealer.
IRIDIUM- TIPPEDSPARK PLUGS
GUID-D07673 71-DD30-47E5-8EA2-C 3004E7D8 712
SDI2020
It is not necessary toreplace theiridium-tipped spark
plugs asfrequently asthe conventional typeofspark
plugs. These sparkplugs aredesigned tolast much
longer thantheconventional typeofspark plugs.
CAUTION:
. Donot reuse theiridium-tipped sparkplugs
by cleaning orre-gapping.
. Always replace withtherecommended ir-
idium-tipped sparkplugs.
DRIVE BELT SP
ARK PLUGS (gasoline engine
models)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-24
Maintenance anddo-it-yours elf
T32A1308 27-8AB0A AAB-E205-4 819-9DC6-D 43AB8CC9EC1
ENGINE COMPARTMENT
T32A1308 27-183829 BC-8212-47 E4-8904-A6582E9358C 5
JVM0386X
CAUTION:
Never useafuse ofahigher orlower amperage
rating thanthatspecified onthe fuse boxcover.
This could damage theelectrical systemor
cause afire.
If any electrical equipment doesnotoperate, checkfor
an open fuse.
1. Be sure theignition switchisin the ªOFFº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Open theengine hood.
4. Remove theaircleaner duct.(SeeªEngine
compartment checklocationsº (P.8-5) .)
5. Remove thefuse/fusible linkbox cover byusing a
suitable tooland pushing thetab.
6. Locate thefuse thatneeds tobe
replaced.
SDI1754
7. Remove thefuse using thefuse puller located in
the passenger compartment.
8. Ifthe fuse isopen
*
A
, replace itwith anew fuse
*
B
.
If the new fuse alsoopens, afterinstalling, havethe
electrical systemchecked, andifnecessary repaired,
by aNISSAN
dealer.
JVM0444X
The holder
*
1
also contains thefuses. Forchecking
and/or replacing, seeaNISSAN dealer.
Fusible links
T32A1308 27-208E32 EE-667A-42F8-A3BB-B5 52FCE416DA
If any electrical equipment doesnotoperate andthe
fuses areingood condition, checkthefusible links.If
any ofthese fusible linksaremelted, replace onlywith
genuine NISSAN parts.
P ASSENGER COMPARTMENT
T32A130 827-AE5A3 2D9-86A8-49 E9-9B78-3857F2C7C1 FE
CAUTION:
Never useafuse ofahigher orlower amperage
rating thanthatspecified onthe fuse boxcover.
This could damage theelectrical systemor
cause afire.
If any electrical equipment doesnotoperate, checkfor
an open fuse.
FUSES
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Outer sideofthe instrument panel
GUID-98D 0498D-295 5-47C0-AA0 9-13C3DDEC AE27
JVM0387X
For allLHD model
JVM0445X
For Stop/Start SystemorIdling StopSystem (ifequipped)
1. Be sure theignition switchisin the ªOFFº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Remove thefuse boxcover.
4. Locate thefuse thatneeds tobe replaced.
5. Remove thefuse using thefuse puller
*
A
.
SDI1754
6. Ifthe fuse isopen
*
A
, replace itwith anew fuse
*
B
.
If the new fuse alsoopens, afterinstalling, havethe
electrical systemchecked, andifnecessary repaired,
by aNISSAN dealer.
Maintenance anddo-it-yours elf
8-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-26
Maintenance anddo-it-yours elf
Glove box
GUID-15 A32307-713 7-4C89-A48B-85EC6F 9F70D8
JVM0388X
RHD model
1. Be sure theignition switchisin the ªOFFº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Open theglove boxand unlock thedamper
*
1
.
4. Hold theglove boxlidso that thedistance
between theupper endofthe lidand the
dashboard isabout 5cm (2in),and then pulloff
the hinges
*
2
located onthe underside ofthe lid.
5. Unlock theleftand right stoppers
*
3
and remove
the glove boxlid.
6. Locate thefuse thatneeds tobe replaced.
7. Remove thefuse using thefuse puller.
SDI1754
8. Ifthe fuse isopen
*
A
, replace itwith anew fuse
*
B
.
If the new fuse alsoopens, afterinstalling, havethe
electrical systemchecked, andifnecessary repaired,
by aNISSAN dealer.
Extended storagefuseswitch
GUID-4D ACCDD0-02 EB-4845-B9C4-BFD1E AF1C1EF
JVM0415X
Example
T o reduce batterydrain,theextended storagefuse
switch comes fromthefactory switched off.Prior to
delivery ofyour vehicle, theswitch ispushed in
(switched on)and should always remainon.
If the extended storagefuseswitch isnot pushed in
(switched on),the ªShipping ModeOnPush Storage
Fuseº warning mayappear inthe vehicle information
display .See ªVehicle information displaywarnings and
indicatorsº (P.2-28) .
If any electrical equipment doesnotoperate, remove
the extended storagefuseswitch andpush itin again.
NO TE:
If the extended storagefuseswitch malfunc-
tions, seeaNISSAN dealer.
How toremove theextended storagefuse
switch:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. To remove theextended storagefuseswitch, be
sure theignition switchisin the ªOFFº orªLOCKº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Remove thefuse boxcover.
4. Pinch thelocking tabs
*
1
found oneach sideof
the extended storagefuseswitch.
5. Pulltheextended storagefuseswitch straight out
from thefuse box
*
2
.
How toremove theextended storagefuse
switch:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. To remove theextended storagefuseswitch, be
sure theignition switchisin the ªOFFº orªLOCKº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Remove thefuse boxcover.
4. Pinch thelocking tabs
*
1
found oneach sideof
the extended storagefuseswitch.
5. Pulltheextended storagefuseswitch straight out
from thefuse box
*
2
.
T32A130 827-A9037D C9-DD9B-4B 9A-BE7E-9036F9796D 86
HEADLIGHTS
T32A130 827-ED0F325 5-CEC5-401B-8EE0-63 DB4CAAD8B3
LED headlight bulb
T32A130827- EAA65B62-0E55-490E- 990B-536AFD F2EB8D
If replacement isrequired, contactaNISSAN dealer.
Halogen headlight bulb
T32A130827- AAC92517-09B4-4636-9E2D-83C41 DBC0FCC
The halogen headlight isasemi-sealed beamtype
which usesreplaceable headlight(halogen) bulbs.
They canbereplaced frominside theengine compart-
ment without removing theheadlight assembly.
CAUTION:
High-pressure halogengasissealed insidethe
bulb. Thebulb maybreak ifthe glass envelope is
scratched orthe bulb isdropped. Low-beam:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0395X
1. Disconnect thebattery negative cable.
2. Disconnect theelectrical connector
*
1
from
the rear endofthe bulb.
3. Remove theheadlight bulb
*
2
by turning it
counter clockwise. Donot shake orrotate the
bulb when removing it.
4. Install thenew bulb inthe reverse orderof
removal.
Maintenance anddo-it-yours elf
8-27
LIGHTS
&RQGLWLRQ
([FHSWIRU&KLQD