wipers NISSAN XTERRA 2012 N50 / 2.G Quick Reference Guide

HEaDliGHt Control sWit CH
H eAd LiGHT c OnTROL

Turn the headlight control switch to the
position


01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the

position
02 to turn on the headlights.
H iGH B eAM S eLec T

Push the headlight control switch forward
03 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
04 to
flash the headlight high beams on and off.
fOG Li GHT SW iTc H (if so equipped)
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.

Turn the switch (inside collar) to the
position
05
to turn the fog lights on.

Turn the switch (inside collar)
to the off position to
turn the fog lights off.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
6
first drive features
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
03
04
01
02
05
WinDsHiEl D WiPEr/W asHEr sW itCH
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (mist) - One sweep operation of the
front wipers.

02 intermittent (int) - front wipers operate
intermittently. The intermittent speed can be
adjusted by twisting the time control ring

03 .

04 Low (lo) - front wipers operate at a continuous
low-speed.

05 High (Hi) - front wipers operate at a continuous
high-speed.

06 Pull the lever toward you to activate the front
washer. The front wipers will operate several
times.
0301
02
04
05
mist
off
int
lo
Hi
06
09