lock NISSAN XTERRA 2012 N50 / 2.G Towing Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2012, Model line: XTERRA, Model: NISSAN XTERRA 2012 N50 / 2.GPages: 27, PDF Size: 2.93 MB
Page 9 of 27

 2012 NISSAN Towing Guide    8 will allow the chains/cables to drag on the ground.  
Do not use S-hooks for attaching, as they may become un-hooked and are illegal in many 
states. To avoid damage to the bumper and chains/cables when making a sharp turn, do not 
attach the chains/cables too close to the coupler. Consult your trailer manufacturer for the 
proper location of the chain/cable attachment to the trailer. 
 
REAR VIEW MIRRORS 
In many cases, a trailer can block your rear vision when you are using only the standard 
NISSAN rear view mirrors. These mirrors were not designed for towing. “Extended” mirrors 
specifically designed for trailer towing should be used when your rearward vision is 
obstructed. Before using these mirrors, make certain that they comply with state and local 
regulations. Telescoping Tow Mirrors are available as an accessory for certain Nissan vehicles. 
Contact your NISSAN dealer for details. 
 
BREAKAWAY SWITCH 
On a trailer with electric brakes, a breakaway switch can automatically activate the trailer 
brake system if the trailer becomes separated from the tow vehicle. Should the trailer become 
detached, a breakaway switch may help prevent the trailer from wandering into another lane.  
  A breakaway switch relies on the power of a trailer battery, so make sure it is not 
discharged. Never use the breakaway switch to “park” the trailer on a grade. The battery 
would eventually discharge and release the brake, allowing the trailer to roll. Be sure to leave 
enough slack in the tether on the breakaway switch to turn corners without binding. If you do 
not, the electric trailer brakes will lock-up and not release. See your trailer manufacturer for 
proper installation of a breakaway switch that is compatible with your trailer braking system. 
 
TRAILER LIGHTS 
Trailer lights should comply with all applicable federal, state, and local regulations, and should 
be in proper working order at all times. A trailer’s taillights, stoplights, and turn signal lights 
must be wired into the tow vehicle’s electrical system.*  
Most trailers operate on a four-wire system in which the stoplights and turn signal lights 
utilize the same wire. Most all NISSAN vehicles have separate wires for the stoplights and turn 
signal lights, therefore a device called a “converter” is needed.** Specifically, a “powered  
 
* Vehicles equipped with LED taillights require that wiring be connected at a specific location. For   
 
  assistance in hooking up trailer lights, contact your NISSAN dealer or a professional supplier of 
 towing
 equipment. 
** Armada, Frontier, Pathfinder, and Titan vehicles are pre-wired for trailer lighting and do not require a 
converter.
  
Page 18 of 27

 2012 NISSAN Towing Guide    17 VEHICLE MODIFICATIONS 
Vehicle modifications — beyond those required for proper hitch installation, wiring hook-up, or  
adding extended mirrors — are not recommended for any NISSAN vehicle being used for 
towing purposes. Changes to the drivetrain, suspension, exhaust systems, frame 
structure/unibody, or other vehicle components are not necessary for towing within the limits 
described in this guide. These changes may diminish the reliability and longevity of your 
vehicle and possibly void warranty coverage. 
 
TOOL KIT 
When towing, bring tools including,  flares, a flashlight, emergency reflectors, jumper cables, 
extra fuses, extra radiator coolant, oil, and easily replaced spare parts such as taillight bulbs. 
You should also carry spare tires for your tow vehicle and trailer, as well as a jack suitable for 
use on the trailer. Be aware that not all automotive jacks can be used safely on a trailer. 
 
BEFORE STARTING OUT 
Before starting out on a trip, make one last inspection of the tow vehicle and the trailer. Are 
the tire pressures correct? Are the safety chains/cables securely in place? Is the cargo tied 
down securely? Do all the lights work? Is the coupler properly attached over the hitch ball and 
secured using a locking pin? Is the breakaway switch hooked up and functioning properly? 
Are vehicle and electric trailer brakes working properly? 
  Make a checklist of key items to be inspected. When towing, vehicle engine oil, 
transmission oil, and coolant should always be checked before starting out. Finding a potential 
problem while in your driveway is better than discovering it miles from home.  
 
 
TOWING  
TIPS                     
 
If you have never towed a trailer before, be aware that it does take getting used to. To begin 
with, towing noticeably affects your vehicle’s performance:  
 Š It will not accelerate as quickly — an important point to keep in mind when merging onto a 
highway.  
 Š It will not stop as quickly. Leave more room than usual between you and the traffic ahead, 
and brake sooner when coming to a stop.  
 Š Abrupt maneuvering can unbalance the load and reduce the handling and stability of your 
tow vehicle. Plan ahead and make lane changes and turns smoothly.   
Page 20 of 27

 2012 NISSAN Towing Guide    19 your hand moves.  If you want to turn the trailer to the left, you will turn the steering wheel to 
the left. To turn the trailer to the right, move the wheel to the right. All movements of the wheel 
should be done in small increments. Of course, backing up should be done only at very slow 
speeds. For large trailers that obstruct your rearward vision, have someone outside the vehicle 
act as a “spotter” to guide you along. 
 
PARK SMART 
A tow vehicle and trailer can be an unwieldy combination in a small area, so always try to park 
where you will have a relatively easy time maneuvering. Once parked, always block the wheels 
on both the tow vehicle and the trailer.   
  Parking on a slope is not recommended. If, however, you must park on a slope and your 
vehicle is equipped with an automatic transmission, there are some precautions you should 
take:  
 Š Have someone block the wheels once the tow vehicle and trailer are in position and being 
held by the vehicle’s brake. 
 Š Next, apply the parking brake and only then move the gear lever into PARK. If you move the 
lever into PARK before blocking the wheels and applying the parking brake, it may be 
difficult later to shift out of PARK. Transmission damage may also occur. 
 
HIGH-ALTITUDE PERFORMANCE 
An engine will lose about 4% of its performance for every 1,000 feet above sea level that you 
travel. If you will be towing in high altitudes, it is a good idea to allow more time than usual due 
to the engine’s reduced performance. 
 
TOW MODE (IF EQUIPPED) 
Tow Mode is recommended when towing a heavy trailer or hauling a heavy load, in stop-and-
go traffic, rolling terrain, or a busy parking lot. Driving the vehicle in Tow Mode may affect fuel 
economy and transmission/engine driving characteristics. See your vehicle owner’s manual for 
additional information about Tow Mode.  
 
HILLS – UPGRADES 
As the incline increases, your vehicle — if equipped with an automatic transmission — is 
designed to automatically select the correct gear for the best towing comfort and 
performance. To maintain speed or avoid up and down shifts, manually shift to a lower gear as 
needed.